E90Post
 


Coby Wheel
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > BMW Coding > e90 Alarm Retrofit Question NCS Coding



Reply
 
Thread Tools Search this Thread
      04-23-2018, 09:42 PM   #1
NCSUPack24
Private First Class
13
Rep
109
Posts

Drives: BMW 328i (E90)
Join Date: Apr 2014
Location: USA

iTrader: (1)

e90 Alarm Retrofit Question NCS Coding

First, let me start with a simple question. The BMW Alarm system from the factory comes with an audible "beep" when unlocking and locking the doors, correct? I have done all the steps I can find online to code/install this thing, but yet it doesn't beep when locking/unlocking.

So far have done the following:

1) Added $302 to the VO in NCS to both the CAS and NFRM
2) After reading that I needed to "restore factory settings" after adding it to the VO, I proceeded to clear out the .MAN file (using the Manipulation profile) in the WORK folder of NCSEXPERT, select the CAS and NFRM (individually), choose CODIEREN as the job, and execute. Get out and hit the lock button... nothing
3) Read that I should have manipulation off, so I made sure to choose a profile with it unchecked. Follow the same steps as #2, and nothing

What am I missing here? Any help is great.

Last edited by NCSUPack24; 04-23-2018 at 10:16 PM..
Appreciate 0
      04-24-2018, 04:46 PM   #2
Joe@TopGearSolutions
Major
Joe@TopGearSolutions's Avatar
267
Rep
1,173
Posts

Drives: BMW
Join Date: Mar 2011
Location: USA

iTrader: (3)

Do you have any DWA* modules listed in NCS to choose from? Have you tested that the sensors operate properly (i.e., pop hood while alarm is active)?
Appreciate 0
      04-29-2018, 09:43 AM   #3
PichaDis11
Colonel
PichaDis11's Avatar
United_States
298
Rep
2,215
Posts

Drives: E90 N52
Join Date: Mar 2013
Location: NY

iTrader: (3)

Quote:
Originally Posted by PGAHopeful26 View Post
First, let me start with a simple question. The BMW Alarm system from the factory comes with an audible "beep" when unlocking and locking the doors, correct? I have done all the steps I can find online to code/install this thing, but yet it doesn't beep when locking/unlocking.

So far have done the following:

1) Added $302 to the VO in NCS to both the CAS and NFRM
2) After reading that I needed to "restore factory settings" after adding it to the VO, I proceeded to clear out the .MAN file (using the Manipulation profile) in the WORK folder of NCSEXPERT, select the CAS and NFRM (individually), choose CODIEREN as the job, and execute. Get out and hit the lock button... nothing
3) Read that I should have manipulation off, so I made sure to choose a profile with it unchecked. Follow the same steps as #2, and nothing

What am I missing here? Any help is great.

Forget Clearing out your MAN file. Just use expert mode profile then select SG_Coderen.

If $302 doesn't help. You will need to use +K302. This is what worked for my car. I coded (Expert mode) CAS, NFRM, JBE and then Alarm modules.
__________________
Retrofits: 322, 609, 6FL, 6NR, 6VC, 2TB..
Upgrades: Bilstein B8 Eibach Spring kit
Appreciate 0
      04-29-2018, 02:41 PM   #4
jsanchez335
Private First Class
jsanchez335's Avatar
United_States
75
Rep
112
Posts

Drives: 2013 E92 M3
Join Date: May 2015
Location: Camp Lejeune

iTrader: (0)

Garage List
2013 E92 M3  [9.00]
Quote:
Originally Posted by PGAHopeful26 View Post
First, let me start with a simple question. The BMW Alarm system from the factory comes with an audible "beep" when unlocking and locking the doors, correct? I have done all the steps I can find online to code/install this thing, but yet it doesn't beep when locking/unlocking.

So far have done the following:

1) Added $302 to the VO in NCS to both the CAS and NFRM
2) After reading that I needed to "restore factory settings" after adding it to the VO, I proceeded to clear out the .MAN file (using the Manipulation profile) in the WORK folder of NCSEXPERT, select the CAS and NFRM (individually), choose CODIEREN as the job, and execute. Get out and hit the lock button... nothing
3) Read that I should have manipulation off, so I made sure to choose a profile with it unchecked. Follow the same steps as #2, and nothing

What am I missing here? Any help is great.
1. Add +K302 to VO
2. Write to CAS and FRM
3. Default code CAS, CAPPL, DWAI, DWAS and KOMBI
4. In DWAI, Code FUNK_INNENRAUMSCHUTZ (Interior Sensor) to Aktiv
Appreciate 0
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 09:25 AM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST