How to enable the Sensors?

unbalanced · 05-26-2018, 01:54 AM

Hi all,

I have a friend who has a BMW e91 (2007) and he said, a repairman turn off the sensors because of a reason. I think it disabled or mute. Well now he wants to active again. When he makes reverse gear,the P button light blinks but we do not hear anything. He has no board computer but has front and back sensors.

The repairman told him that it should be re-programming. I am not sure whether this information is correct or not. Can I do that with some tools?

Thank you

Pierre26 · 05-27-2018, 05:07 AM

Simple, ask to the ''repairman'' who did this sh*t to code it back.
You need a Laptop with the right SW (here is NCS Expert installed with the Ediabas BD) + right cable.
It 's just coding, but too many infos missing here.
If your FA didn't be changed you can code using default parameters.
Hoping he din't swicth off some HW.

05-26-2018, 01:54 AM	#1
unbalanced New Member 2 Rep 5 Posts Drives: X1 e84 Join Date: Apr 2018 Location: Bern iTrader: (0)	How to enable the Sensors? Hi all, I have a friend who has a BMW e91 (2007) and he said, a repairman turn off the sensors because of a reason. I think it disabled or mute. Well now he wants to active again. When he makes reverse gear,the P button light blinks but we do not hear anything. He has no board computer but has front and back sensors. The repairman told him that it should be re-programming. I am not sure whether this information is correct or not. Can I do that with some tools? Thank you
	Appreciate 0 Tweet Quote

05-27-2018, 05:07 AM	#2
Pierre26 Private First Class 20 Rep 105 Posts Drives: 2009-335D Pack M Join Date: Jun 2014 Location: France iTrader: (0)	Simple, ask to the ''repairman'' who did this sht to code it back. You need a Laptop with the right SW (here is NCS Expert installed with the Ediabas BD) + right cable. It 's just coding, but too many infos missing here. If your FA didn't be changed you can code using default parameters. Hoping he din't swicth off some HW. Last edited by Pierre26; 05-27-2018 at 05:13 AM..*
	Appreciate 0 Quote