Jlevi SW | Enkreuz Galleria! Photos of the 5 sets we have in stock

SV Concepts · 06-27-2008, 04:01 PM

Greetings
As your official Enkreuz Master Distributor yada yada yada.... ok now here are the pics!!!

Featured above:
-H8R 20" Matte Black/Crimson Red with Matte Barrels (SOLD)
-H8R 20" Brushed/Chrome E90/E92/E46 M3/Z4M
-H8R 19" Matte Gunmetal/Polished E90/E92/E46 M3/Z4M
-HS10 19" Matte Silver/Polished E90/E92/E46 M3/Z4M
-H8R 20" Gloss Black/Chrome E90/E92/E46 M3/Z4M

Let us know if you want one of the 4 available sets or want to order a custom set! :hi:

Thanks!
JL

///AFRO · 06-27-2008, 04:02 PM

nice rims

SV Concepts III · 06-27-2008, 05:58 PM

I agree, and I get to see them everyday

remmib · 06-27-2008, 07:22 PM

Nice collection.

SV Concepts · 06-27-2008, 07:36 PM

Aren't they?

Sooo light!

usc335 · 06-28-2008, 01:54 AM

What size are the 19" H8Rs for the E92 and what offset are they (if you can say)? How big are the lips front and rear? I really like these wheels, but I haven't been able to see them in person. I'm actually looking for Gloss Gunmetal and I'm not planning on running a BBK. My top two wheels I'm considering are HRE 590Rs and these. Thanks.

SV Concepts III · 06-28-2008, 08:04 PM

The 19" are a 19x8.5 and 19x10, Enkreuz does not release the offsets but they are E92 specific offsets. You can run these even on a lowered vehicle without any issues and they will sit flush with the fender. They are about a 2.75" lip front and 3.5" lip rear.

BTW, not sure if your screen name refers to the school but if so, Fight On from an alumn

usc335 · 06-28-2008, 11:47 PM

Fight On! Yes, I'm a fellow Trojan. Does Enkreuz make different wheels for BBK and non-BBK applications? Will running a 275 be problem (I am not adverse to fender rolling, but I don't want it to rub at all)? I noticed that on the car below, the rear tire looks stretched (or is it an optical illusion?). Is the front really a 2.75" lip?

Since, you're an HRE dealer too, what do you think of the HRE 590R's vs. the Enkreuz H8R's. Does one of the two have larger lips front and rear? You guessed it, I want the one with the largest lip that doesn't look stupid. Thanks!

Greenspotpop · 06-29-2008, 12:05 AM

Nice rims, nicely done

usc335 · 06-29-2008, 12:16 AM

For the record, that's not my car. It's "Rips335iCoupe" and it is clean! I still haven't seen these wheels in person though and I'm bummed.

SV Concepts III · 06-29-2008, 01:11 AM

You can run a 275 on these wheels but may need to roll your fender if you lower the car or ride with passengers. I believe Rick (Rips335iCoupe) is running 265 rears.

Both HRE and Enkreuz are going to have comparable lip sizes so there is not much difference.

Realize that Rips' wheels are BBK friendly so the lip size is smaller to allow for clearance of a larger caliper.

usc335 · 06-29-2008, 02:36 AM

(1) So a front 2.75" lip and rear 3.5" lip is for the non-BBK version which is larger than Rips335iCoupe's? If so,

(2) My car is lowered on HKS Hipermax III coilovers and I plan on having passengers, so I presume as long as I roll the fender, I shouldn't rub with 275's? I wish I knew what the offsets were... At least with HRE's, I can specify them. Hmmm...
Thanks again.

neuzpeed · 06-29-2008, 02:48 AM

pm price for the matte gunmetal H8R thanks

BMW F22 · 06-29-2008, 03:28 AM

PM sent

sublimey · 06-29-2008, 02:41 PM

How much for this for the E92

http://i21.photobucket.com/albums/b2...ENKREUZ008.jpg

SV Concepts III · 06-29-2008, 03:24 PM

Sending over a PM with our In stock Promo special

usc335 · 06-29-2008, 06:58 PM

One last question (for now), for the 19" E92 H8R's what are the different lip sizes front and rear for BBK and non-BBK applications? Thanks.

///M PWR 00 · 06-29-2008, 07:05 PM

Be warned fellas... Dont run a 275 on the rears, as they do rub on a lowered E93 335i. I think without a drop it should be fine. Lowered I would go with a 255, maybe a 265 but thats really pushing it and you better get toyos or something with a streched sidewall

Rips335iCoupe · 06-29-2008, 08:06 PM

OK, I just measured.

Front BBK 1.75" lip (approx)
Rear BBK 2.75" lip (approx)
Nitto 265 on rear (lowered), no rub.

SV Concepts III · 06-29-2008, 08:24 PM

Thanks for clarifying Rick!

The non-BBK cars will have a 2.5-2.75" lip front and ~3.5" lip rear.

usc335 · 06-30-2008, 01:58 AM

Thanks, Rick and Nick. Rick, since you have the wheels and are lowered, do you think running a 275 in the rear with a fender roll will work without any rubbing? By the way, your car is very tastfully done!

SV Concepts III · 06-30-2008, 12:48 PM

You may need to roll your fenders with a 275 setup, maybe Rick can measure the distance between the tire and outer fender to give us an idea of how much clearance he has.

06-27-2008, 04:01 PM	#1
SV Concepts 390 Rep 5,835 Posts Drives: Vorsteiner E60 M5 Join Date: Mar 2006 Location: 1460 White Oaks Rd. Suite F. Campbell, CA 95008 iTrader: (10)	Jlevi SW \| Enkreuz Galleria! Photos of the 5 sets we have in stock Greetings As your official Enkreuz Master Distributor yada yada yada.... ok now here are the pics!!! Featured above: -H8R 20" Matte Black/Crimson Red with Matte Barrels (SOLD) -H8R 20" Brushed/Chrome E90/E92/E46 M3/Z4M -H8R 19" Matte Gunmetal/Polished E90/E92/E46 M3/Z4M -HS10 19" Matte Silver/Polished E90/E92/E46 M3/Z4M -H8R 20" Gloss Black/Chrome E90/E92/E46 M3/Z4M Let us know if you want one of the 4 available sets or want to order a custom set! :hi: Thanks! JL
	Appreciate 0 Tweet Quote

06-27-2008, 04:02 PM	#2
///AFRO Stage 1 Juice Box - Boosted' 183 Rep 1,521 Posts Drives: 07 AW E92-335i TT Join Date: May 2007 Location: SoCal iTrader: (0)	nice rims __________________ 2007 *335i* -Coupe Alpine White Mods: JB1 \| Exposed Intercooler \| Black Grills/Emblems \| Golf-Tee Mod \| Reflectors \| 35% Tints Next: Aero-Lip \| H&R Race Srings \| Dual Cone Intake \| Straight-Pipes Soon: 2006 ///M3 Coupe Imola Red - [CSL Project]
	Appreciate 0 Quote

06-27-2008, 05:58 PM	#3
SV Concepts III Lieutenant General 379 Rep 16,968 Posts Drives: BMW Duh Join Date: Apr 2005 Location: Santa Clara iTrader: (13)	I agree, and I get to see them everyday
	Appreciate 0 Quote

06-27-2008, 07:22 PM	#4
remmib General 1584 Rep 29,215 Posts Drives: 2013 F10 520d M-Sport Join Date: Feb 2006 Location: Norway iTrader: (0)	Nice collection. __________________ F10 520d M-Sport Alpine White \| HRE P43SC 20x9+20x11 \| Michelin PSS 255/35+295/30 \| KW V3 Coilover \| M5 Front Sway Bar + M550d Rear Sway Bar \| 3DDesign Front Lip \| BMW M Performance CF Spoiler \| BMW M Performance Diffuser \| BMW M Performance Black Grills \| BMW M Performance Pedals \|
	Appreciate 0 Quote

06-27-2008, 07:36 PM	#5
SV Concepts 390 Rep 5,835 Posts Drives: Vorsteiner E60 M5 Join Date: Mar 2006 Location: 1460 White Oaks Rd. Suite F. Campbell, CA 95008 iTrader: (10)	Aren't they? Sooo light!
	Appreciate 0 Quote

06-28-2008, 01:54 AM	#6
usc335 First Lieutenant 67 Rep 383 Posts Drives: 21 M2C\|24 X3 M40i\|08 E92 335 Join Date: May 2008 Location: so cal iTrader: (1)	What size are the 19" H8Rs for the E92 and what offset are they (if you can say)? How big are the lips front and rear? I really like these wheels, but I haven't been able to see them in person. I'm actually looking for Gloss Gunmetal and I'm not planning on running a BBK. My top two wheels I'm considering are HRE 590Rs and these. Thanks.
	Appreciate 0 Quote

06-28-2008, 08:04 PM	#7
SV Concepts III Lieutenant General 379 Rep 16,968 Posts Drives: BMW Duh Join Date: Apr 2005 Location: Santa Clara iTrader: (13)	The 19" are a 19x8.5 and 19x10, Enkreuz does not release the offsets but they are E92 specific offsets. You can run these even on a lowered vehicle without any issues and they will sit flush with the fender. They are about a 2.75" lip front and 3.5" lip rear. BTW, not sure if your screen name refers to the school but if so, Fight On from an alumn
	Appreciate 0 Quote

06-28-2008, 11:47 PM	#8
usc335 First Lieutenant 67 Rep 383 Posts Drives: 21 M2C\|24 X3 M40i\|08 E92 335 Join Date: May 2008 Location: so cal iTrader: (1)	Fight On! Yes, I'm a fellow Trojan. Does Enkreuz make different wheels for BBK and non-BBK applications? Will running a 275 be problem (I am not adverse to fender rolling, but I don't want it to rub at all)? I noticed that on the car below, the rear tire looks stretched (or is it an optical illusion?). Is the front really a 2.75" lip? Since, you're an HRE dealer too, what do you think of the HRE 590R's vs. the Enkreuz H8R's. Does one of the two have larger lips front and rear? You guessed it, I want the one with the largest lip that doesn't look stupid. Thanks!
	Appreciate 0 Quote

06-29-2008, 12:05 AM	#9
Greenspotpop Second Lieutenant 21 Rep 210 Posts Drives: Manual M3 and Manual Gallardo Join Date: Apr 2008 Location: Canada iTrader: (1)	Nice rims, nicely done __________________ -2008 E90 Silver Stone II M3 6-Spd Manual -2014 50th Anniversario 6-Spd Manual Gallardo -2015 F80 Black Sapphire Metallic M3 6-Spd Manual (on order)
	Appreciate 0 Quote

06-29-2008, 12:16 AM	#10
usc335 First Lieutenant 67 Rep 383 Posts Drives: 21 M2C\|24 X3 M40i\|08 E92 335 Join Date: May 2008 Location: so cal iTrader: (1)	For the record, that's not my car. It's "Rips335iCoupe" and it is clean! I still haven't seen these wheels in person though and I'm bummed.
	Appreciate 0 Quote

06-29-2008, 01:11 AM	#11
SV Concepts III Lieutenant General 379 Rep 16,968 Posts Drives: BMW Duh Join Date: Apr 2005 Location: Santa Clara iTrader: (13)	You can run a 275 on these wheels but may need to roll your fender if you lower the car or ride with passengers. I believe Rick (Rips335iCoupe) is running 265 rears. Both HRE and Enkreuz are going to have comparable lip sizes so there is not much difference. Realize that Rips' wheels are BBK friendly so the lip size is smaller to allow for clearance of a larger caliper.
	Appreciate 0 Quote

06-29-2008, 02:36 AM	#12
usc335 First Lieutenant 67 Rep 383 Posts Drives: 21 M2C\|24 X3 M40i\|08 E92 335 Join Date: May 2008 Location: so cal iTrader: (1)	(1) So a front 2.75" lip and rear 3.5" lip is for the non-BBK version which is larger than Rips335iCoupe's? If so, (2) My car is lowered on HKS Hipermax III coilovers and I plan on having passengers, so I presume as long as I roll the fender, I shouldn't rub with 275's? I wish I knew what the offsets were... At least with HRE's, I can specify them. Hmmm... Thanks again.
	Appreciate 0 Quote

06-29-2008, 02:48 AM	#13
neuzpeed Captain 71 Rep 786 Posts Drives: MW BMW M4 2015 Join Date: Mar 2007 Location: Sacramento, CA iTrader: (4)	pm price for the matte gunmetal H8R thanks __________________ MW/SO 2015 F82 M4
	Appreciate 0 Quote

06-29-2008, 03:28 AM	#14
BMW F22 Major General 3661 Rep 9,783 Posts Drives: ///M235i Join Date: Nov 2005 Location: Bay Area iTrader: (8)	PM sent
	Appreciate 0 Quote

06-29-2008, 02:41 PM	#15
sublimey Private First Class 8 Rep 123 Posts Drives: Boxster S Join Date: Feb 2008 Location: SG iTrader: (0)	How much for this for the E92 http://i21.photobucket.com/albums/b2...ENKREUZ008.jpg
	Appreciate 0 Quote

06-29-2008, 03:24 PM	#16
SV Concepts III Lieutenant General 379 Rep 16,968 Posts Drives: BMW Duh Join Date: Apr 2005 Location: Santa Clara iTrader: (13)	Sending over a PM with our In stock Promo special
	Appreciate 0 Quote

06-29-2008, 06:58 PM	#17
usc335 First Lieutenant 67 Rep 383 Posts Drives: 21 M2C\|24 X3 M40i\|08 E92 335 Join Date: May 2008 Location: so cal iTrader: (1)	One last question (for now), for the 19" E92 H8R's what are the different lip sizes front and rear for BBK and non-BBK applications? Thanks.
	Appreciate 0 Quote

06-29-2008, 07:05 PM	#18
///M PWR 00 Captain 92 Rep 937 Posts Drives: Porsche Join Date: Mar 2008 Location: Yonkers, NY iTrader: (0)	Be warned fellas... Dont run a 275 on the rears, as they do rub on a lowered E93 335i. I think without a drop it should be fine. Lowered I would go with a 255, maybe a 265 but thats really pushing it and you better get toyos or something with a streched sidewall __________________
	Appreciate 0 Quote

06-29-2008, 08:06 PM	#19
Rips335iCoupe Banned 31 Rep 947 Posts Drives: 2007 BMW 335i Coupe Join Date: Aug 2007 Location: Goodyear, AZ iTrader: (1) Garage List 2007 335i Coupe [0.00]	OK, I just measured. Front BBK 1.75" lip (approx) Rear BBK 2.75" lip (approx) Nitto 265 on rear (lowered), no rub.
	Appreciate 0 Quote

06-29-2008, 08:24 PM	#20
SV Concepts III Lieutenant General 379 Rep 16,968 Posts Drives: BMW Duh Join Date: Apr 2005 Location: Santa Clara iTrader: (13)	Thanks for clarifying Rick! The non-BBK cars will have a 2.5-2.75" lip front and ~3.5" lip rear.
	Appreciate 0 Quote

06-30-2008, 01:58 AM	#21
usc335 First Lieutenant 67 Rep 383 Posts Drives: 21 M2C\|24 X3 M40i\|08 E92 335 Join Date: May 2008 Location: so cal iTrader: (1)	Thanks, Rick and Nick. Rick, since you have the wheels and are lowered, do you think running a 275 in the rear with a fender roll will work without any rubbing? By the way, your car is very tastfully done!
	Appreciate 0 Quote

06-30-2008, 12:48 PM	#22
SV Concepts III Lieutenant General 379 Rep 16,968 Posts Drives: BMW Duh Join Date: Apr 2005 Location: Santa Clara iTrader: (13)	You may need to roll your fenders with a 275 setup, maybe Rick can measure the distance between the tire and outer fender to give us an idea of how much clearance he has.
	Appreciate 0 Quote