plug and play harness.. connectors & pins question

Alex@AKMotorwerk · 06-27-2008, 05:38 PM

Anyone know the part numbers or where i can buy the connectors and pins needed to be able to "make" my own harness? Before everyone starts to flame me, i'm just looking to make myself a Plug & Play harness for my Helix Attache. Seems like the JB3 and the Proceed V3 are using the same black and gray connectors as well as pins for their harnesses... Thanks for any help u guys might be able to give me

mmmotornutz · 06-27-2008, 05:54 PM

Tyco, and not the RC toy.

Alex@AKMotorwerk · 06-27-2008, 06:07 PM

Quote:

Originally Posted by mmmotornutz

Tyco, and not the RC toy.

good start.... thanks, but that site has a million connectors. Anyone have any idea on possible part numbers???

BALLAJL15 · 06-27-2008, 06:43 PM

Quote:

Originally Posted by nj323ci

good start.... thanks, but that site has a million connectors. Anyone have any idea on possible part numbers???

look on your factory connectors. Then go to the dealorship and ask for the ecu connectors there about 2$ each

Alex@AKMotorwerk · 06-27-2008, 10:01 PM

Quote:

Originally Posted by BALLAJL15

look on your factory connectors. Then go to the dealorship and ask for the ecu connectors there about 2$ each

thanks, i'll give that a shot

anyone else have the part number's off hand or even know of a place online that i can order these from?

CASHBY · 06-27-2008, 10:57 PM

realoemparts.com you can get them all from the dealer... or like stated above TYCO has a good choice of them.

Alex@AKMotorwerk · 06-27-2008, 11:27 PM

Quote:

Originally Posted by Charlie@RissRacing

realoemparts.com you can get them all from the dealer... or like stated above TYCO has a good choice of them.

here's what i'm looking at on Realoem.com:
http://www.realoem.com/bmw/partgrp.d...14&hg=61&fg=15

and here's what i'm looking at on Tyco's website:
http://catalog.tycoelectronics.com/c...ML=11177,13981

Can you point me to which part is the connector to the DME??

CASHBY · 06-28-2008, 12:21 AM

http://www.realoem.com/bmw/diagrams/m/d/190.png

Picture Number one... part # 61130005197 that is for the female connector... and for the male just get at any electrical store for a lot cheaper than the dealer.

Alex@AKMotorwerk · 06-28-2008, 04:52 PM

ok, took apart the conectors in the ecu and got the part numbers needed... oly problem is that Tyco doesn't sell them because they are "restricted" and only for sale to BMW. I could get them from BMW, but they are more expensive. Anyone else have any other sources for these?

Here's a list of part numbers in case anyone is looking for them:

Large Black 44-pin dme connector on passenger side:
Tyco part #: 1452273-1
bmw part #: 7521532

Small White 26 pin dme connector on passenger side:
Tyco part #: 1452274-1
bmw part #: 7521529

Small Gray 26 pin dme connector on driver side:
Tyco part #: 1452274-2
bmw part #: 7521528

Small black 26 pin dme connector on driver side:
Tyco part #: 1452274-1
bmw part #: 7521527

Single pins (male) 0.2-0.5mm2
bmw part #: 61-13-0-005-198

Single sockets (female) 0.2-0.5mm2
bmw part #: 61-13-0-005-201

exidisjon · 05-03-2009, 08:39 PM

Any luck on this? I was just searching to find a OEM connectors and came thru this..ANy luck sorry for bringing old thread.

Alex@AKMotorwerk · 05-03-2009, 08:46 PM

Quote:

Originally Posted by exidisjon

Any luck on this? I was just searching to find a OEM connectors and came thru this..ANy luck sorry for bringing old thread.

not worth it... the pins are specific and come in rolls of like 50k as a minimum to buy. Best bet is to buy the PnP upgrade harness from BMS and be done with it!

RiXst3r · 05-03-2009, 09:08 PM

^^ yup...

It looks like this, has exactly what you need. (4 pass-through sub-connectors)

Italia335i · 05-03-2009, 09:12 PM

I would just buy a jb3 pnp harness and adapt it to the attache

gtrokin330 · 05-03-2009, 09:21 PM

i had to buy the ecu slider and got if from tischer...just give the guys at tischer those part numbers and im sure they can get it for you...shouldnt cost more than 30 total?

exidisjon · 05-03-2009, 09:28 PM

Quote:

Originally Posted by gtrokin330

i had to buy the ecu slider and got if from tischer...just give the guys at tischer those part numbers and im sure they can get it for you...shouldnt cost more than 30 total?

Hmm if they can do this that would be SO much cheaper than the $230 for the hardness. But i heard the OEM hardness cost alot to begin with.

NM_BMW · 05-04-2009, 03:04 PM

Not even Tischer could give you a deal on these?

mkPOTO · 08-12-2010, 03:39 PM

Quote:

Originally Posted by RiXst3r

^^ yup...

It looks like this, has exactly what you need. (4 pass-through sub-connectors)

where can i get these things?

Mike@N54Tuning.com · 08-12-2010, 03:46 PM

Quote:

Originally Posted by mkPOTO

where can i get these things?

http://www.n54tuning.com/index.php?_...od&productId=8

Mike

RiXst3r · 08-12-2010, 03:46 PM

Quote:

Originally Posted by mkPOTO

where can i get these things?

EDIT: Mike beat me to it

Alex@Helix · 08-12-2010, 04:47 PM

Hey Alex,
Ive been looking to do this for a long time and im sorry to say its not easy at all to get the harnesses made.

UPDATE: I found a few of the parts but to build the pnp harness would be around the same price Burger is selling it for. Unfortunate but its the truth

06-27-2008, 05:38 PM	#1
Alex@AKMotorwerk 209 Rep 9,339 Posts Drives: 2012 AW F10 535i Join Date: Jun 2007 Location: Hillsborough, NJ iTrader: (7)	plug and play harness.. connectors & pins question Anyone know the part numbers or where i can buy the connectors and pins needed to be able to "make" my own harness? Before everyone starts to flame me, i'm just looking to make myself a Plug & Play harness for my Helix Attache. Seems like the JB3 and the Proceed V3 are using the same black and gray connectors as well as pins for their harnesses... Thanks for any help u guys might be able to give me
	Appreciate 0 Tweet Quote

06-27-2008, 05:54 PM	#2
mmmotornutz Lieutenant 5 Rep 479 Posts Drives: Montego 335i Join Date: Nov 2007 Location: NorCal iTrader: (0)	Tyco, and not the RC toy.
	Appreciate 0 Quote

06-27-2008, 10:57 PM	#6
CASHBY 171 Rep 2,114 Posts Drives: E90 335 "done up" Join Date: Dec 2006 Location: GARAGE iTrader: (2)	realoemparts.com you can get them all from the dealer... or like stated above TYCO has a good choice of them.
	Appreciate 0 Quote

06-28-2008, 12:21 AM	#8
CASHBY 171 Rep 2,114 Posts Drives: E90 335 "done up" Join Date: Dec 2006 Location: GARAGE iTrader: (2)	http://www.realoem.com/bmw/diagrams/m/d/190.png Picture Number one... part # 61130005197 that is for the female connector... and for the male just get at any electrical store for a lot cheaper than the dealer.
	Appreciate 0 Quote

06-28-2008, 04:52 PM	#9
Alex@AKMotorwerk 209 Rep 9,339 Posts Drives: 2012 AW F10 535i Join Date: Jun 2007 Location: Hillsborough, NJ iTrader: (7)	ok, took apart the conectors in the ecu and got the part numbers needed... oly problem is that Tyco doesn't sell them because they are "restricted" and only for sale to BMW. I could get them from BMW, but they are more expensive. Anyone else have any other sources for these? Here's a list of part numbers in case anyone is looking for them: Large Black 44-pin dme connector on passenger side: Tyco part #: 1452273-1 bmw part #: 7521532 Small White 26 pin dme connector on passenger side: Tyco part #: 1452274-1 bmw part #: 7521529 Small Gray 26 pin dme connector on driver side: Tyco part #: 1452274-2 bmw part #: 7521528 Small black 26 pin dme connector on driver side: Tyco part #: 1452274-1 bmw part #: 7521527 Single pins (male) 0.2-0.5mm2 bmw part #: 61-13-0-005-198 Single sockets (female) 0.2-0.5mm2 bmw part #: 61-13-0-005-201
	Appreciate 0 Quote

05-03-2009, 08:39 PM	#10
exidisjon PuffPuffPass 55 Rep 1,096 Posts Drives: E92 335xi AW/Saddle Join Date: Aug 2008 Location: NJ iTrader: (8)	Any luck on this? I was just searching to find a OEM connectors and came thru this..ANy luck sorry for bringing old thread.
	Appreciate 0 Quote

05-03-2009, 09:08 PM	#12
RiXst3r 288 Rep 6,510 Posts Drives: M235i Join Date: Sep 2006 Location: Ohio iTrader: (14)	^^ yup... It looks like this, has exactly what you need. (4 pass-through sub-connectors) Attached Images
	Appreciate 0 Quote

05-03-2009, 09:12 PM	#13
Italia335i Banned 2 Rep 88 Posts Drives: BMW Join Date: Mar 2009 Location: USA iTrader: (1)	I would just buy a jb3 pnp harness and adapt it to the attache
	Appreciate 0 Quote

05-03-2009, 09:21 PM	#14
gtrokin330 Brigadier General 155 Rep 3,865 Posts Drives: TT Join Date: Sep 2007 Location: LI iTrader: (7)	i had to buy the ecu slider and got if from tischer...just give the guys at tischer those part numbers and im sure they can get it for you...shouldnt cost more than 30 total?
	Appreciate 0 Quote

05-04-2009, 03:04 PM	#16
NM_BMW Vishnu Powered 74 Rep 2,205 Posts Drives: 335xi, S1000RR Join Date: Nov 2007 Location: Proceding iTrader: (7)	Not even Tischer could give you a deal on these? __________________ 2008 335xi Sedan \| Titanium Silver \| Black Dakota PROcede v5 \| Vishnu Exhaust \| BMS DCI \| AR Catless DPs \| Helix FMIC \| Stett Charge w/ Tial BOV \| MORR VS8s \| KWv3
	Appreciate 0 Quote

08-12-2010, 04:47 PM	#20
Alex@Helix Colonel 153 Rep 2,221 Posts Drives: e92 335i Join Date: Sep 2007 Location: Miami, FL iTrader: (8)	Hey Alex, Ive been looking to do this for a long time and im sorry to say its not easy at all to get the harnesses made. UPDATE: I found a few of the parts but to build the pnp harness would be around the same price Burger is selling it for. Unfortunate but its the truth Last edited by Alex@Helix; 08-17-2010 at 05:31 PM..
	Appreciate 0 Quote