DP downpipes install RR

Park828 · 07-01-2008, 12:25 PM

I just installed the RissRacing DPs last night. WHAT A PITA! its pretty damn tight in there. For those of you who you also have installed DPs..

Does your car have more vibrations in the cabin at idle? and when the dps are installed.. my rear dp was about 1/4 inch shorter then the front one... anyone else?

M3to335 · 07-01-2008, 12:32 PM

Not really any more vibration. Its certainly louder, but sounds good to me!

Yours was only 1/4" shorter? Mine was more like a solid inch.

Park828 · 07-01-2008, 12:43 PM

an inch?! what hell did you do to line them up?!

BMWeber · 07-01-2008, 01:23 PM

def more vibration at idle. and I found the second time I put the down pipes in if you leave the v band clamps loose and twist the two DP side to side a bit you'll fined a position where there pretty close in length to each other and position to the rest of the exhaust. the first time I put them in one was dam close to an inch off. second time was more like a 1/8-1/4 very close. and as for getting things together with an inch difference.... well get the nut started and tighten them down.

Park828 · 07-01-2008, 01:45 PM

i hate those damn v band clamps

M3to335 · 07-01-2008, 03:59 PM

I unhooked the rest of the system (from the DPs back), then tightened the nuts going to the DP's. After that I hooked back up the rear section.

Riss Racing · 07-01-2008, 04:05 PM

It all has to do with the install. Its a process to get them to set perfect. Its easy for my techs because they have done it so many times. However for the first timer its a little harder. If your having problems please contact me I will put a tech on the phone to help you out.

Park828 · 07-01-2008, 04:19 PM

car just feels like my e36 M3 with hard tranny mounts also tightened too much...

What time are you guys there till? I'm afraid by the time i get off work and let the car cool down enough for me to work on it again.. you probably will be closed.

Riss Racing · 07-01-2008, 04:36 PM

Quote:

Originally Posted by Park828

car just feels like my e36 M3 with hard tranny mounts also tightened too much...

What time are you guys there till? I'm afraid by the time i get off work and let the car cool down enough for me to work on it again.. you probably will be closed.

I can put a tech on the phone 24/7 we will be open for you anytime. Please PM me I will give you my personal cell phone. Thanks!

Park828 · 07-02-2008, 03:44 PM

all those people in norcal.. where did you guys have your dps installed? any local shop recommendations?

Riss Racing · 07-02-2008, 04:29 PM

Quote:

Originally Posted by Park828

all those people in norcal.. where did you guys have your dps installed? any local shop recommendations?

Let me know if nobody helps you out. i'll put my tech on the phone to track a shop down for you. Thanks!

07-01-2008, 12:25 PM	#1
Park828 Banned 25 Rep 552 Posts Drives: Man Join Date: Feb 2007 Location: Usa iTrader: (3)	DP downpipes install RR I just installed the RissRacing DPs last night. WHAT A PITA! its pretty damn tight in there. For those of you who you also have installed DPs.. Does your car have more vibrations in the cabin at idle? and when the dps are installed.. my rear dp was about 1/4 inch shorter then the front one... anyone else?
	Appreciate 0 Tweet Quote

07-01-2008, 12:32 PM	#2
M3to335 Whats that smell? 149 Rep 1,790 Posts Drives: Bimmers, duh Join Date: Nov 2006 Location: NC iTrader: (6)	Not really any more vibration. Its certainly louder, but sounds good to me! Yours was only 1/4" shorter? Mine was more like a solid inch.
	Appreciate 0 Quote

07-01-2008, 12:43 PM	#3
Park828 Banned 25 Rep 552 Posts Drives: Man Join Date: Feb 2007 Location: Usa iTrader: (3)	an inch?! what hell did you do to line them up?!
	Appreciate 0 Quote

07-01-2008, 01:23 PM	#4
BMWeber Major 36 Rep 1,329 Posts Drives: 08 135i Join Date: Sep 2007 Location: Amesbury, MA iTrader: (5)	def more vibration at idle. and I found the second time I put the down pipes in if you leave the v band clamps loose and twist the two DP side to side a bit you'll fined a position where there pretty close in length to each other and position to the rest of the exhaust. the first time I put them in one was dam close to an inch off. second time was more like a 1/8-1/4 very close. and as for getting things together with an inch difference.... well get the nut started and tighten them down.
	Appreciate 0 Quote

07-01-2008, 01:45 PM	#5
Park828 Banned 25 Rep 552 Posts Drives: Man Join Date: Feb 2007 Location: Usa iTrader: (3)	i hate those damn v band clamps
	Appreciate 0 Quote

07-01-2008, 03:59 PM	#6
M3to335 Whats that smell? 149 Rep 1,790 Posts Drives: Bimmers, duh Join Date: Nov 2006 Location: NC iTrader: (6)	I unhooked the rest of the system (from the DPs back), then tightened the nuts going to the DP's. After that I hooked back up the rear section.
	Appreciate 0 Quote

07-01-2008, 04:05 PM	#7
Riss Racing Banned 278 Rep 2,650 Posts Drives: E60 M5/E92 335/HUMMER H2 Join Date: Jun 2007 Location: Irvine, CA iTrader: (7)	It all has to do with the install. Its a process to get them to set perfect. Its easy for my techs because they have done it so many times. However for the first timer its a little harder. If your having problems please contact me I will put a tech on the phone to help you out.
	Appreciate 0 Quote

07-01-2008, 04:19 PM	#8
Park828 Banned 25 Rep 552 Posts Drives: Man Join Date: Feb 2007 Location: Usa iTrader: (3)	car just feels like my e36 M3 with hard tranny mounts also tightened too much... What time are you guys there till? I'm afraid by the time i get off work and let the car cool down enough for me to work on it again.. you probably will be closed.
	Appreciate 0 Quote

07-02-2008, 03:44 PM	#10
Park828 Banned 25 Rep 552 Posts Drives: Man Join Date: Feb 2007 Location: Usa iTrader: (3)	all those people in norcal.. where did you guys have your dps installed? any local shop recommendations?
	Appreciate 0 Quote