Dimisa V 4 Tips SG

NAWT · 07-01-2008, 06:04 PM

Just installed these and they look great! The driver side has the vacuum acuator at the bend on the stock exhaust, so be careful where you cut it. The tips stick out about 1/4 inch more than OEM and are lined up with the top of the bumper cap. IMHO, I think this is the best loolk.

JP, if you have not dealt with him, is great- ready to help and fast on answering questions.

Dan335i · 07-01-2008, 06:09 PM

Looks great.Any change in the exhaust sound?

AU335 · 07-01-2008, 06:17 PM

Looks great man. Thinking about buying a pair this week...maybe tonight. hah who knows

NAWT · 07-01-2008, 09:21 PM

Instead of the golf tee mod, I disconnected the actuator lead from inside the trunk. There is a post on doing that in the DIY. I didn't think the tips would make ANY difference, but they do! Slight - but just enough!

The exhaust guy who put it on commented on the quality of the tips - which IMHO, are very well made.

To get them just the way I wanted them, I had them trim the inlet side of the tips by about 1/4 inch. They don't stick out too far - just far enough for you to notice, but not too far to look "unnatural"

Highly recommended.

I believe JP has the black powder coated ones now, and the quad tips.

AU335 · 07-01-2008, 09:44 PM

Just ordered a set!

NAWT · 07-01-2008, 09:51 PM

When you have the exhaust shop cut the oem pipes, make sure that the cut is nice and clean. Then have them spray the cut cross section with silver high heat paint - that way, when you look in through the dimisa tips, the edges blend in better!

AU335 · 07-01-2008, 09:57 PM

Quote:

Originally Posted by NAWT

When you have the exhaust shop cut the oem pipes, make sure that the cut is nice and clean. Then have them spray the cut cross section with silver high heat paint - that way, when you look in through the dimisa tips, the edges blend in better!

Awesome thanks for the tips (no pun intended haha). Ill probably send you a PM before i take it to the shop to get some more info on your install.

LambOfGod · 07-01-2008, 11:25 PM

better than stock.

ChaneRZ · 07-02-2008, 02:12 AM

sweet!

Craig@SupremePower · 07-02-2008, 02:15 AM

Very nice I love the 4'' version!!

Bubbles · 07-02-2008, 08:21 AM

Nice look. What happened to the "5"?

dimisa1977 · 07-02-2008, 08:26 AM

guys: this is a prime example of a perfect install (inmho).

remember, the dimisa tips are now available from the folks at J LEVI (www.jlevisw.com)!

Nawt: Thanks for the kind words...

dimisa1977 · 07-02-2008, 08:42 AM

Quote:

Originally Posted by AU335

Just ordered a set!

congrats! i am sure the folks at j levi took great care of you!

NAWT · 07-02-2008, 08:50 AM

Since we are all OC to a certain degree, start with installing the one on the driver's side - make sure it protrudes just right, and that it is level. Once you have done that, do the passenger side - not the other way around!

Bring your own measuring tape, bubble leveller, etc. I also brought some masking tape to tape on the inside edge of the exhaust opening and around the outside area where the tips protrude -- this prevents dirty hand imprints, and any scratches from tools touching the paint.

The shop had to undo the hangers and drop the mufflers to get to weld the top of the tips -- make sure that they don't break the hangers - especially the one toward the middle of the car.

Once everything is done - recheck for level using the bulb leveller - take off the tape - it distracts your eyes when you are trying to line things up!

Once everything is buttoned up, back the car off the hoist SLOWLY so you don't scratch your new tips or anyhting else.

Enjoy that new Dimisa sound (with or without the modified tee mod) - and the extra 1000 HP of smiles that you and others are going to give you.

As I left the shop, I had a Z06 pull up next to me - the driver said "Look at those moneysticks!" LOL. The Z06 tips look anemic compared to V4. He asked if Dimisa made them for his car - so JP you might get a call!

SV Concepts III · 07-02-2008, 01:11 PM

Those do look great, I love that 4"!

07-01-2008, 06:04 PM	#1
NAWT NAWT 13 Rep 113 Posts Drives: 2008 335 6-speed SP/Prem Join Date: Jan 2006 Location: Chapel Hill NC iTrader: (2)	Dimisa V 4 Tips SG Just installed these and they look great! The driver side has the vacuum acuator at the bend on the stock exhaust, so be careful where you cut it. The tips stick out about 1/4 inch more than OEM and are lined up with the top of the bumper cap. IMHO, I think this is the best loolk. JP, if you have not dealt with him, is great- ready to help and fast on answering questions. Attached Images __________________ 2008 e90 335, Sparkling Graphite, Terra Interior, Sport, Premium, 6 MT, Dimisa Tips, 19" Performance Wheels, Performance SSK, B/W CF Roundels, CF Grille, Xenon Depot 6K D1s, Predator Ice, M3 spoiler, Mtech front cap.
	Appreciate 0 Tweet Quote

07-01-2008, 06:09 PM	#2
Dan335i Lieutenant Colonel 33 Rep 1,786 Posts Drives: 07 335i coupe 6MT,w/sp. pack. Join Date: Oct 2007 Location: orange county NY iTrader: (2)	Looks great.Any change in the exhaust sound?
	Appreciate 0 Quote

07-01-2008, 06:17 PM	#3
AU335 Colonel 198 Rep 2,443 Posts Drives: 2007 e92 335i Join Date: Mar 2007 Location: Southeast iTrader: (7) Garage List 2007 335i [0.00]	Looks great man. Thinking about buying a pair this week...maybe tonight. hah who knows
	Appreciate 0 Quote

07-01-2008, 09:21 PM	#4
NAWT NAWT 13 Rep 113 Posts Drives: 2008 335 6-speed SP/Prem Join Date: Jan 2006 Location: Chapel Hill NC iTrader: (2)	Exhaust Sound Instead of the golf tee mod, I disconnected the actuator lead from inside the trunk. There is a post on doing that in the DIY. I didn't think the tips would make ANY difference, but they do! Slight - but just enough! The exhaust guy who put it on commented on the quality of the tips - which IMHO, are very well made. To get them just the way I wanted them, I had them trim the inlet side of the tips by about 1/4 inch. They don't stick out too far - just far enough for you to notice, but not too far to look "unnatural" Highly recommended. I believe JP has the black powder coated ones now, and the quad tips. __________________ 2008 e90 335, Sparkling Graphite, Terra Interior, Sport, Premium, 6 MT, Dimisa Tips, 19" Performance Wheels, Performance SSK, B/W CF Roundels, CF Grille, Xenon Depot 6K D1s, Predator Ice, M3 spoiler, Mtech front cap.
	Appreciate 0 Quote

07-01-2008, 09:44 PM	#5
AU335 Colonel 198 Rep 2,443 Posts Drives: 2007 e92 335i Join Date: Mar 2007 Location: Southeast iTrader: (7) Garage List 2007 335i [0.00]	Just ordered a set!
	Appreciate 0 Quote

07-01-2008, 09:51 PM	#6
NAWT NAWT 13 Rep 113 Posts Drives: 2008 335 6-speed SP/Prem Join Date: Jan 2006 Location: Chapel Hill NC iTrader: (2)	Awesome! When you have the exhaust shop cut the oem pipes, make sure that the cut is nice and clean. Then have them spray the cut cross section with silver high heat paint - that way, when you look in through the dimisa tips, the edges blend in better! __________________ 2008 e90 335, Sparkling Graphite, Terra Interior, Sport, Premium, 6 MT, Dimisa Tips, 19" Performance Wheels, Performance SSK, B/W CF Roundels, CF Grille, Xenon Depot 6K D1s, Predator Ice, M3 spoiler, Mtech front cap.
	Appreciate 0 Quote

07-01-2008, 11:25 PM	#8
LambOfGod Lieutenant 15 Rep 571 Posts Drives: 335 Red Sedan Join Date: May 2007 Location: Michigan iTrader: (0)	better than stock.
	Appreciate 0 Quote

07-02-2008, 02:12 AM	#9
ChaneRZ If You Aint First, You're last !!! 100 Rep 2,508 Posts Drives: 08 BMW 335i, 01 Honda Prelude Join Date: Sep 2007 Location: California iTrader: (0)	sweet! __________________ 08 BMW BSM 335i 6MT (Sports, Premium, NAV, PDC, AS, IPOD, HD Radio, Rear Sunshade, OEM Alarm) Angel iBright V3, Luminics Fog Bulb, Turbo Tuner, K&N Drop in Filter, Dinan Exhaust, Dinan Pedals, Vorsteiner CF Front Lip, and CF Rear Diffuser. Ordered:08/25/07 Started: 09/09/07 Finished: 09/14/07 On Ship: 09/15/07 Arrived: 10/08/07 Delivered: 10/10/07
	Appreciate 0 Quote

07-02-2008, 02:15 AM	#10
Craig@SupremePower G.O.A.T.! 1018 Rep 74,992 Posts Drives: '18 GMC Yukon XL Join Date: Mar 2008 Location: New Jersey iTrader: (14)	Very nice I love the 4'' version!!
	Appreciate 0 Quote

07-02-2008, 08:21 AM	#11
Bubbles Brigadier General 2824 Rep 4,445 Posts Drives: Green Bastard Join Date: Jun 2007 Location: Bishop Bend iTrader: (3)	Nice look. What happened to the "5"? __________________
	Appreciate 0 Quote

07-02-2008, 08:26 AM	#12
dimisa1977 Major 57 Rep 1,137 Posts Drives: BMW Specialist (exhaust) Join Date: Mar 2008 Location: USA iTrader: (3) Garage List 2008 BMW [0.00] 2008 BMW [0.00]	guys: this is a prime example of a perfect install (inmho). remember, the dimisa tips are now available from the folks at J LEVI (www.jlevisw.com)! Nawt: Thanks for the kind words...
	Appreciate 0 Quote

07-02-2008, 08:50 AM	#14
NAWT NAWT 13 Rep 113 Posts Drives: 2008 335 6-speed SP/Prem Join Date: Jan 2006 Location: Chapel Hill NC iTrader: (2)	Install Since we are all OC to a certain degree, start with installing the one on the driver's side - make sure it protrudes just right, and that it is level. Once you have done that, do the passenger side - not the other way around! Bring your own measuring tape, bubble leveller, etc. I also brought some masking tape to tape on the inside edge of the exhaust opening and around the outside area where the tips protrude -- this prevents dirty hand imprints, and any scratches from tools touching the paint. The shop had to undo the hangers and drop the mufflers to get to weld the top of the tips -- make sure that they don't break the hangers - especially the one toward the middle of the car. Once everything is done - recheck for level using the bulb leveller - take off the tape - it distracts your eyes when you are trying to line things up! Once everything is buttoned up, back the car off the hoist SLOWLY so you don't scratch your new tips or anyhting else. Enjoy that new Dimisa sound (with or without the modified tee mod) - and the extra 1000 HP of smiles that you and others are going to give you. As I left the shop, I had a Z06 pull up next to me - the driver said "Look at those moneysticks!" LOL. The Z06 tips look anemic compared to V4. He asked if Dimisa made them for his car - so JP you might get a call! __________________ 2008 e90 335, Sparkling Graphite, Terra Interior, Sport, Premium, 6 MT, Dimisa Tips, 19" Performance Wheels, Performance SSK, B/W CF Roundels, CF Grille, Xenon Depot 6K D1s, Predator Ice, M3 spoiler, Mtech front cap.
	Appreciate 0 Quote

07-02-2008, 01:11 PM	#15
SV Concepts III Lieutenant General 380 Rep 16,968 Posts Drives: BMW Duh Join Date: Apr 2005 Location: Santa Clara iTrader: (13)	Those do look great, I love that 4"!
	Appreciate 0 Quote