|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Car won't start with driver seat disconnected
|
|
10-17-2018, 08:03 PM | #1 |
Professional Hack
96
Rep 379
Posts |
Car won't start with driver seat disconnected
Prepping the car for race seats and found that my car will not start if the drivers seat yellow connector is unplugged.
Passenger seat doesn't seem to matter. Anyone have an idea?
__________________
MCS 1WNR Dampers | Ground Control Camber Plates | E90 M3 front control arms| E90 M3 front tension arm w/ Turner monoball bearings | E90 M3 Steering rack conversion | SPL Adjustable Outer Tie Rod Ends | M3 Rear Camber Arms | SPL Adjustable Rear Toe Arms | M3 Front Caliper Conversion | 275/35/18 Toyo RA1s | 18x9.5ET22 Apex EC-7’s | mFactory LSD | AIM EVO4S with GS Dash | New for 2020: LS1 Swap!
|
10-17-2018, 08:28 PM | #2 |
Professional Hack
96
Rep 379
Posts |
Nevermind, it seems I now need a ton of clutch pedal pressure to get the safety switch to close and start the car. Should probably look at replacing that.
|
Appreciate
0
|
Bookmarks |
|
|