[Bluewater335D]

Just stated using the Foxwell NT520/510 and I ran a scan

I got one fault - see below - can anyone help me to understand what has happened - car is 2011 - LCI 335D - under 40,000 miles - car runs fine - no lights on dash to indicate anything wrong

[Andy198712]

So do the scan, then hit display dtc and it’ll tell you, but it’s prob an old code so note it delete it and re scan in a week

[bfleming]

You need to his 'Display DTC' when line 2 is highlighted. You've identified the DDE (ECU) module, not the fault!

[Bluewater335D]

Originally Posted by bfleming

You need to his 'Display DTC' when line 2 is highlighted. You've identified the DDE (ECU) module, not the fault!

Thanks for your comments:

I figured this out after playing with the Foxwell

The fault code I am getting is

"4222/not present - DDE Glow Plug cylinder 2, activation"

have discussed this on another thread - could be just the glow plug or the glow plug and controller.

I clear the fault code but it comes back straight away

The car has only done 35,000 miles, but is 7 years old

I'll change all the 6 glow plugs and controller when I have time in the New Year

car runs fine and no lights on dash

[rasa bmw]

yeh ive got 6 faults the same,,did on my e46 also for 5 years,,as longbas dpf is gone then fine but get fixed if still have dpf