[MarkN54]

Hey guys what’s up, so I Finally fixed my power steering leak and my mosfet issue, now I have a oil leak to tackle, it’s at the front of the engine, replaced OFHG, valve cover, camshaft sensors o rings, my next thing is vanos solenoids gaskets but i don’t see oil near them, it seems to Be right under we’re the head gasket meets the engine, I’m gonna take pictures right now and show you guys, I just cleaned it tho but I’ll drive it around and take more pictures again... it’s getting on my belts and scared it’s gonna snap off and cause more problems, oh and I replaced, the front crank seal as well so I’m lost any help would be great, crossing my fingers isn’t not a external head gasket leak...


Thanks guys any help would be great!


Last picture is the one you see the oil leak, it’s has a tint of green bc I used and engine dye to locate leak but it’s very difficult

[MarkN54]

Anyone?

[feuer]

I can't see any fresh oil.

[MarkN54]

Originally Posted by feuer

I can't see any fresh oil.

Hey feuer. The pictures where taken after I cleaned it I just wanted to show where it leaks, the last picture you can see the oil I’ll take a better picture today

[SPEEDRACER/n54]

Originally Posted by MarkN54

Hey feuer. The pictures where taken after I cleaned it I just wanted to show where it leaks, the last picture you can see the oil I’ll take a better picture today

Did u figure out I have the same issue

[Bimmer_Engineer]

Originally Posted by SPEEDRACER/n54

Did u figure out I have the same issue

Check this thread out...

https://www.e90post.com/forums/showt...1530103&page=2

[SPEEDRACER/n54]

Originally Posted by Bimmer_Engineer

Check this thread out...

https://www.e90post.com/forums/showt...103&page=2

I checked it didn't have nothing that compared to the leak I'm having,I did crank seal,oil pan gasket,valve cover n oil filter housing n oil cooler gasket