[NRG]

Question to long time PROcede owners. Is there an alternative way to hide/connect PROcede ground loom, exept the one shown in the install video? Thanks.

[jpsimon]

route the ground wire through the ecu box into the glove box, ground it in there. completely hidden

[scalbert]

I am working on a PnP solution for both power and ground. I am currently just waiting on parts (which had to be ordered from Germany) which shipped last week.

[NRG]

Originally Posted by jpsimon

route the ground wire through the ecu box into the glove box, ground it in there. completely hidden

Where exactly in the glove box?, good idea btw.

Originally Posted by scalbert

I am working on a PnP solution for both power and ground. I am currently just waiting on parts (which had to be ordered from Germany) which shipped last week.

Wow, can't wait!!!

[Tuned335i]

Originally Posted by NRG

Where exactly in the glove box?, good idea btw.

You can run it through the same hole that some (including me) have run the USB cable into the glovebox. Click here for the DIY. I used this serial-to-USB cable. Cheap and compact.

I should mention that I tried this, and grounded to teh large silver structure inside the glovebox where I have my boost gauge grounded. While the ground worked fine for the boost gauge, it wouldn't work for the PROceded. Threw all kinds of codes. I must have screwed something up but I gave up on the ground through the ECU box. You'll probably have no problem though - I am sure I jacked it up somehow...

[NRG]

Originally Posted by Tuned335i

You can run it through the same hole that some (including me) have run the USB cable into the glovebox. Click here for the DIY. I used this serial-to-USB cable. Cheap and compact.

I should mention that I tried this, and grounded to teh large silver structure inside the glovebox where I have my boost gauge grounded. While the ground worked fine for the boost gauge, it wouldn't work for the PROceded. Threw all kinds of codes. I must have screwed something up but I gave up on the ground through the ECU box. You'll probably have no problem though - I am sure I jacked it up somehow...

Thanks for the tip, I'm wanna see what scalbert prepared for us.

[Tuned335i]

For a long time I obsessed with hiding the ground wire, then I realized that there's no way I would ever take the car to the dealership with the tune installed (or any engine mods for that matter), so hiding the ground wire became a mute point.

[Sniz]

Originally Posted by Tuned335i

For a long time I obsessed with hiding the ground wire, then I realized that there's no way I would ever take the car to the dealership with the tune installed (or any engine mods for that matter), so hiding the ground wire became a mute point.

+1

Just take the few minutes to take the Procede out...problem solved.

don't get w/ in 5 miles of a dealer w a tune in....they will know

[NRG]

Thanks fellas, just trying to fit it all in to the ECU box.