Steering Wheel Controls/Switch for Paddle upgrade BMW Part # 61319123287

bluewater328 · 04-15-2019, 09:50 PM

BIMMERPOST / Classifieds

Asking Price:

Sold

Item Interest

FOR SALE

6-pin steering wheel controls required for paddle upgrade/retro with Burger upgrade wire (or DIY for that matter). Plug and play and ready to ship.

Steering Wheel Controls/Switch BMW Part # 61319123287

Verified working and yes, buttons would be swappable if that's your thing. Excellent condition (see pics)

I also have a second unit with the right board and controls, but needs the 6pin wire connection soldiered on (take your 4-pin and add the other two wires). That one is $50 for the trouble.

matamua · 08-11-2019, 01:17 AM

Quote:

Originally Posted by bluewater328

FOR SALE

6-pin steering wheel controls required for paddle upgrade/retro with Burger upgrade wire (or DIY for that matter). Plug and play and ready to ship.

Steering Wheel Controls/Switch BMW Part # 61319123287

Verified working and yes, buttons would be swappable if that's your thing. Excellent condition (see pics)

I also have a second unit with the right board and controls, but needs the 6pin wire connection soldiered on (take your 4-pin and add the other two wires). That one is $50 for the trouble.

Do you still have these buttons?

bluewater328 · 08-11-2019, 01:51 AM

Quote:

Originally Posted by matamua

Quote:

Originally Posted by bluewater328

FOR SALE

6-pin steering wheel controls required for paddle upgrade/retro with Burger upgrade wire (or DIY for that matter). Plug and play and ready to ship.

Steering Wheel Controls/Switch BMW Part # 61319123287

Verified working and yes, buttons would be swappable if that's your thing. Excellent condition (see pics)

I also have a second unit with the right board and controls, but needs the 6pin wire connection soldiered on (take your 4-pin and add the other two wires). That one is $50 for the trouble.

Do you still have these buttons?

I have a set that would need to transplant the 6 -wire in. But the control module itself is what you are looking for.

matamua · 08-11-2019, 10:02 AM

Quote:

Originally Posted by bluewater328

Quote:

Originally Posted by matamua

Quote:

Originally Posted by bluewater328

FOR SALE

6-pin steering wheel controls required for paddle upgrade/retro with Burger upgrade wire (or DIY for that matter). Plug and play and ready to ship.

Steering Wheel Controls/Switch BMW Part # 61319123287

Verified working and yes, buttons would be swappable if that's your thing. Excellent condition (see pics)

I also have a second unit with the right board and controls, but needs the 6pin wire connection soldiered on (take your 4-pin and add the other two wires). That one is $50 for the trouble.

Do you still have these buttons?

I have a set that would need to transplant the 6 -wire in. But the control module itself is what you are looking for.

Thanks for the reply. I'm assuming you'd have to crack the MF buttons open at that point and add wires to two contacts on the board, then put them in the female end of the connector to create the six pin?

Any guides on how to do that? I can solder.

bluewater328 · 08-11-2019, 02:45 PM

Quote:

Originally Posted by matamua

Quote:

Originally Posted by bluewater328

Quote:

Originally Posted by matamua

Quote:

Originally Posted by bluewater328

FOR SALE

6-pin steering wheel controls required for paddle upgrade/retro with Burger upgrade wire (or DIY for that matter). Plug and play and ready to ship.

Steering Wheel Controls/Switch BMW Part # 61319123287

Verified working and yes, buttons would be swappable if that's your thing. Excellent condition (see pics)

I also have a second unit with the right board and controls, but needs the 6pin wire connection soldiered on (take your 4-pin and add the other two wires). That one is $50 for the trouble.

Do you still have these buttons?

I have a set that would need to transplant the 6 -wire in. But the control module itself is what you are looking for.

Thanks for the reply. I'm assuming you'd have to crack the MF buttons open at that point and add wires to two contacts on the board, then put them in the female end of the connector to create the six pin?

Any guides on how to do that? I can solder.

I have this set left which I'd give you for $50. It is the exactly the same one, but you can see from the pic you'd have to solder in the 6-pin moles (or your direct wire).

matamua · 08-18-2019, 05:41 AM

Quote:

Originally Posted by bluewater328

Quote:

Originally Posted by matamua

Quote:

Originally Posted by bluewater328

Quote:

Originally Posted by matamua

Quote:

Originally Posted by bluewater328

FOR SALE

6-pin steering wheel controls required for paddle upgrade/retro with Burger upgrade wire (or DIY for that matter). Plug and play and ready to ship.

Steering Wheel Controls/Switch BMW Part # 61319123287

Verified working and yes, buttons would be swappable if that's your thing. Excellent condition (see pics)

I also have a second unit with the right board and controls, but needs the 6pin wire connection soldiered on (take your 4-pin and add the other two wires). That one is $50 for the trouble.

Do you still have these buttons?

I have a set that would need to transplant the 6 -wire in. But the control module itself is what you are looking for.

Thanks for the reply. I'm assuming you'd have to crack the MF buttons open at that point and add wires to two contacts on the board, then put them in the female end of the connector to create the six pin?

Any guides on how to do that? I can solder.

I have this set left which I'd give you for $50. It is the exactly the same one, but you can see from the pic you'd have to solder in the 6-pin moles (or your direct wire).

PM'd

bluewater328 · 08-18-2019, 05:55 AM

Quote:

Originally Posted by matamua

Quote:

Originally Posted by bluewater328

Quote:

Originally Posted by matamua

Quote:

Originally Posted by bluewater328

Quote:

Originally Posted by matamua

Quote:

Originally Posted by bluewater328

FOR SALE

6-pin steering wheel controls required for paddle upgrade/retro with Burger upgrade wire (or DIY for that matter). Plug and play and ready to ship.

Steering Wheel Controls/Switch BMW Part # 61319123287

Verified working and yes, buttons would be swappable if that's your thing. Excellent condition (see pics)

I also have a second unit with the right board and controls, but needs the 6pin wire connection soldiered on (take your 4-pin and add the other two wires). That one is $50 for the trouble.

Do you still have these buttons?

I have a set that would need to transplant the 6 -wire in. But the control module itself is what you are looking for.

Thanks for the reply. I'm assuming you'd have to crack the MF buttons open at that point and add wires to two contacts on the board, then put them in the female end of the connector to create the six pin?

Any guides on how to do that? I can solder.

I have this set left which I'd give you for $50. It is the exactly the same one, but you can see from the pic you'd have to solder in the 6-pin moles (or your direct wire).

PM'd

Replied

matamua · 08-22-2019, 04:39 AM

Quote:

Originally Posted by bluewater328

Quote:

Originally Posted by matamua

Quote:

Originally Posted by bluewater328

Quote:

Originally Posted by matamua

Quote:

Originally Posted by bluewater328

Quote:

Originally Posted by matamua

Quote:

Originally Posted by bluewater328

FOR SALE

6-pin steering wheel controls required for paddle upgrade/retro with Burger upgrade wire (or DIY for that matter). Plug and play and ready to ship.

Steering Wheel Controls/Switch BMW Part # 61319123287

Verified working and yes, buttons would be swappable if that's your thing. Excellent condition (see pics)

I also have a second unit with the right board and controls, but needs the 6pin wire connection soldiered on (take your 4-pin and add the other two wires). That one is $50 for the trouble.

Do you still have these buttons?

I have a set that would need to transplant the 6 -wire in. But the control module itself is what you are looking for.

Thanks for the reply. I'm assuming you'd have to crack the MF buttons open at that point and add wires to two contacts on the board, then put them in the female end of the connector to create the six pin?

Any guides on how to do that? I can solder.

I have this set left which I'd give you for $50. It is the exactly the same one, but you can see from the pic you'd have to solder in the 6-pin moles (or your direct wire).

PM'd

Replied

Shipping was super fast and I soldered them
up today. Works great!

04-15-2019, 09:50 PM	#1
bluewater328 Colonel 640 Rep 2,098 Posts Drives: 2011 bluewater 328i LCI sedan Join Date: Aug 2010 Location: Hawaii iTrader: (0)	BIMMERPOST / Classifieds Asking Price: Sold Item Interest FOR SALE 6-pin steering wheel controls required for paddle upgrade/retro with Burger upgrade wire (or DIY for that matter). Plug and play and ready to ship. Steering Wheel Controls/Switch BMW Part # 61319123287 Verified working and yes, buttons would be swappable if that's your thing. Excellent condition (see pics) I also have a second unit with the right board and controls, but needs the 6pin wire connection soldiered on (take your 4-pin and add the other two wires). That one is $50 for the trouble. Attached Images Last edited by bluewater328; 04-17-2019 at 06:22 AM..
	Appreciate 0 Tweet Quote