[Clammy]

Let me start by saying I have searched a zillion times, and read numerous threads, and posts regarding coding 6FL, but I can't get it to work.

I recently picked up a 2006 E90 330i. She has the S640 Bluetooth Phone Prep option. She also has the Logic 7 sound system. I am currently sourcing the parts to get the Bluetooth going, and since I already have a MULF2 High, I decided to use it for the Bluetooth, and to do the 6FL as well.

I've installed the MULF2, reconfigured the MOST distribution block per the 6FL Retrofit instructions, swapped the connector from the prep harness to the blue MULF2 connector, and connected a USB cable from the MULF2 to the USB/AUX plug.

As far as I can tell, the hardware side is taken care of. This leaves the coding.

I added $6FL to the VO in the CAS and NFRM (I upgraded the old FRM1 to FRM2), faked the production date, and default coded the MULF2 and 2URAD. When I read the 2URAD, there are no usb entries whatsoever, so I'm thinking this is where the issue is. Pretty much all the threads/posts I've read talk about coding the 2RAD. This is where I'm stuck.

So, if anyone can just lay out step by step, what I need to do to get the USB going, I would be HIGHLY appreciative! I'm at my wits' end...

Thanks in advance.

Cheers!

[ctuna]

first of all because it's an 06 and the usb option wasn't offered
in that year there are some tricks you have to do to get that option
into that year car. As long as the software recognizes the car as an
06 you won't be able to load the option.
Changing the production date of the car to load the option is the only
way to do it.

The option is called ulf in the radio file .
That is for the mulf.

Actually it's much easier and cheaper to install one of these.

http://www.e90post.com/forums/showth...4#post23244354

http://www.e90post.com/forums/showthread.php?t=1181654

http://www.e90post.com/forums/showthread.php?t=1126467

http://www.**************/showthread...ighlight=mulf2

http://www.**************/showthread...ighlight=mulf2

B*M*W*coders.com

Radio file


codierung_erfolgt
CDC
nicht_aktiv
AUDIO_SYSTEM
pl2_hifi
pl3_hifi
SDARS
nicht_aktiv
PDC
nicht_aktiv
ACC
nicht_aktiv
STANDHEIZUNG
nicht_aktiv
AUX_RAD
aux
BAUREIHEX
e9x
COUNTRYCODE_RADIO
us
IBOC
nicht_aktiv
KEY_MEMORY_R
aktiv
MUTE_TIMES
pl2
NACHLAUF_INT_R
pl2
RIGHTHAND
nicht_aktiv
SOFTEN_ENTERTAINMENT_PDC
nicht_aktiv
TCU_ECE
nicht_aktiv
TIMEOUT_INT_R
pl2
ULF_ECE
nicht_aktiv
BMW_AKD
nicht_aktiv

notice ULF ECE would need to be aktiv.

Look in the Mulf file for similar lines for bluetooth and ulf activation.

Also you have to default code (VO code)the modules for the new VO codes to be read
into the modules that the changes are to made in.

[Clammy]

Originally Posted by ctuna

first of all because it's an 06 and the usb option wasn't offered
in that year there are some tricks you have to do to get that option
into that year car. As long as the software recognizes the car as an
06 you won't be able to load the option.
Changing the production date of the car to load the option is the only
way to do it.

The option is called ulf in the radio file .
That is for the mulf.

Actually it's much easier and cheaper to install one of these.

http://www.e90post.com/forums/showth...4#post23244354

http://www.e90post.com/forums/showthread.php?t=1181654

http://www.e90post.com/forums/showthread.php?t=1126467

http://www.**************/showthread...ighlight=mulf2

http://www.**************/showthread...ighlight=mulf2

B*M*W*coders.com

Radio file


codierung_erfolgt
CDC
nicht_aktiv
AUDIO_SYSTEM
pl2_hifi
pl3_hifi
SDARS
nicht_aktiv
PDC
nicht_aktiv
ACC
nicht_aktiv
STANDHEIZUNG
nicht_aktiv
AUX_RAD
aux
BAUREIHEX
e9x
COUNTRYCODE_RADIO
us
IBOC
nicht_aktiv
KEY_MEMORY_R
aktiv
MUTE_TIMES
pl2
NACHLAUF_INT_R
pl2
RIGHTHAND
nicht_aktiv
SOFTEN_ENTERTAINMENT_PDC
nicht_aktiv
TCU_ECE
nicht_aktiv
TIMEOUT_INT_R
pl2
ULF_ECE
nicht_aktiv
BMW_AKD
nicht_aktiv

notice ULF ECE would need to be aktiv.

Look in the Mulf file for similar lines for bluetooth and ulf activation.

Also you have to default code (VO code)the modules for the new VO codes to be read
into the modules that the changes are to made in.

Hey thanks. I've looked at most (if not all) of those threads, but you just gave me a new piece of info: the ULF_ECE setting in the radio file. I didn't know about that. Thanks!

As I said, I did the production date trick, and I did default code the MULF2 and 2URAD modules. I was looking for usb options in the radio file, and none ever showed up. I set all the usb options I found in the 2ULF file "aktiv", except the one referencing the USB hub, since I don't have one in the car. I'll check for ULF activation entries in that file, and see if changing that ULF_ECE setting to "aktiv" will do the trick. Fingers crossed! I hope this works. I've been pulling my hair out, haha!!

Thanks, again!

Cheers!

[ctuna]

USB should show up as an option in the menu that has cd aux cdc radio and
telephone in it in it when it is enabled.

[Clammy]

So I set the ULF_ECE entry in the radio file to "aktiv", set all the USB related entries in the MULF2 file to "aktiv" (didn't find any ULF entries). Still nothing...

It looks like the head unit has never been flashed with an updated firmware. INPA reports the date as 2006, the year of the car. I'm thinking this is my problem... unless anyone else knows for sure?

Cheers!

[ctuna]

http://www.e90post.com/forums/showthread.php?t=1126467

http://www.e90post.com/forums/showth...5#post19088745

http://www.e90post.com/forums/showthread.php?t=1344811

http://www.**************/showthread...ighlight=mulf2

http://www.**************/showthread...ighlight=mulf2

**** entry hide B*M*Wcoding.com minus the stars.

[Clammy]

Ok, making some progress. I flashed the head unit using WinKFP, and now I have the USB option in the TRC file. The HU had never been updated. I set the USB_RAD and ULF_ECE options to "aktiv", and now USB shows up on the HU display, and the armrest aux port no longer works (AUX no longer shows up on the HU display either)! BUT, it's disabled. I have a USB stick plugged in, but the HU display just shows 2 lines, and nothing happens when I press the button associated with the USB option on the display.

I'm trying a couple of other things I've read about:

I am currently flashing the MULF2 with WinKFP (there was an update available). Once I'm done that, I will add +KMP3 and +IPOD to the VO in CAS and NFRM, and do an SG_RESET on the 2URAD and 2MULF modules. Hopefully, that does the trick. I'll report my success/failure when I'm done. Wish me luck!

Cheers!

[Clammy]

Well, after over 2 hours updating the MULF, adding +KMP3 and +IPOD to the VO, and running SG_RESET on the 2URAD and 2MULF modules, I'm stuck. The USB option is on the HU display, the USB port IS getting power, but nothing happens when I plug a USB stick in... the display just has 2 lines on the USB option, and is unselectable... AND, now I don't even have the AUX available to play music through... I can't figure out what I'm missing here...

[ctuna]

Some cars has the USB Hub which is usually located on the US driver side
kick panel . And it was also a powered device with a fuse. I don't know if this was both in Idrive and pro radio cars or only Idrive.
I would think you could bypass this with cabling.

https://www.newtis.info/tisv2/a/en/

Look up Mulf 2 hi in the above link.
They call it ulf hi in that link I believe.

georges links
https://www.bimmerfest.com/forums/at...9&d=1539905743

When you program in the Mulf 2 hi the aux connection is switched
to the Mulf 2 Hi Module
Pull up the Mulf 2 hi schematic and look at it.
Both Usb and aus come from the Mulf 2 hi.

Also I recall that some companies like BMWretrofits sell a TCU to mulf 2 hi
harness to get away from some of the repinning you have to do if
you use a mulf 2 hi to replace a tcu.

[Clammy]

Finally... SUCCESS!!!!!

I found one more thing to add to my VO: +ULF2. I added it to the CAS and NFRM, then instead of running SG_RESET on the 2URAD and 2MULF modules, I ran sg_codieren with a blank MAN file. That did the trick! I have full USB functionality, and AUX is on the HU display, and is enabled,, so once I wire the aux port to the MULF2, I will have that functionality back, too! I am SOOOO happy!! I was pulling my hair out!!

So, in summary, this is what I needed coding-wise:

Used WinKFP to flash the 2URAD and 2MULF modules
Added $6FL, +KMP3, +IPOD, +ULF2 to the VO, in CAS and NFRM
Default coded the 2URAD and 2MULF modules using a blank MAN file.

This list is what I was hoping to find when I posted this thread. I'm just so happy that it works!!!

Next up will be adding Bluetooth. That should be a lot smoother, as there is a LOT more info out there regarding that!

Cheers!

[Clammy]

Originally Posted by ctuna

Some cars has the USB Hub which is usually located on the US driver side
kick panel . And it was also a powered device with a fuse. I don't know if this was both in Idrive and pro radio cars or only Idrive.
I would think you could bypass this with cabling.

https://www.newtis.info/tisv2/a/en/

Look up Mulf 2 hi in the above link.
They call it ulf hi in that link I believe.

georges links
https://www.bimmerfest.com/forums/at...9&d=1539905743

When you program in the Mulf 2 hi the aux connection is switched
to the Mulf 2 Hi Module
Pull up the Mulf 2 hi schematic and look at it.
Both Usb and aus come from the Mulf 2 hi.

Also I recall that some companies like BMWretrofits sell a TCU to mulf 2 hi
harness to get away from some of the repinning you have to do if
you use a mulf 2 hi to replace a tcu.

I didn't install the USB hub. Just have the straight connection between the MULF2 and Aux/USB plug.

Cheers!

[ctuna]

Cheap easy way to install bluetooth phone and streaming
plus usb and sd card and extra aux.

http://www.e90post.com/forums/showth...4#post23244354

could you state your hardware changes?

[Clammy]

Originally Posted by ctuna

Cheap easy way to install bluetooth phone and streaming
plus usb and sd card and extra aux.

http://www.e90post.com/forums/showth...4#post23244354

could you state your hardware changes?

I prefer a factory install.

The hardware I added for the USB install was a MULF2 Hi SVS, blue MULF2 connector housing, USB fakra cable, and USB/Aux plug. My car already had the S640 Phone Prep, so I just had to swap the 2 connectors in the white TCU housing to the blue MULF2 housing, and plug in the MOST cable (I, of course, had to reconfigure the MOST junction box per the instructions). I still have to wire the Aux port, and add the terminals to the appropriate connectors now living in the blue MULF2 housing. I have the pinouts, so that should be fairly easy.

The hardware side was dead easy. The coding was a hassle, only because it was so hard to find the info I needed. Once I had that, it's easy, too.

Cheers!

[Clammy]

A quick update.

Instead of fabricating a harness for the AUX plug to MULF2, I bought a USB/AUX kit off Amazon, for less than 20 bucks (it includes the USB/AUX plug, Fakra cable, and AUX harness).

I removed the large connector (I assume it's meant to go into the USB hub that I didn't install ), and installed the individual terminals into the MULF2 connector, according to the pinout I have. The large AUX connector only had 3 terminals, and I have the pinout for 4. The small connector that goes into the AUX connector has 4 terminals, but pins 1 and 2 are jumpered. So, I installed AUX connector pin 2 into MULF2 connector pin 22, AUX connector pin 3 to MULF2 connector pin 5, and AUX connector pin 1 to MULF2 connector pin 4. Plugged in an mp3 player, chose AUX on the HU, and everything worked perfectly!

I haven't run the wiring up to the armrest yet, since it's winter now, and I don't have a garage to work inside, but I'll be doing that in the spring. For now, I just leave a USB stick plugged into the USB port currently sitting loose in the trunk. It's so awesome to have that functionality.

As a side note, I also installed the components for Bluetooth (BT antenna, speaker, microphone), added S644 to the VO, default coded the HU and MULF2, and I have full BT/voice command functionality.

Also, my original HU had the typical display panel lcd fade out, so I replaced it. I found one manufactured in late 2008 on Ebay, so I also coded the Kombi for the updated gongs. Easy peasy, thanks to the info on this site.

Thanks to all who helped me out!

Cheers!

[ctuna]

Could you list the contents of the 2urad file and the Mulf 2 hi file.
Did you use only a K/D can cable or did you use and Icom cable?

[Clammy]

Originally Posted by ctuna

Could you list the contents of the 2urad file and the Mulf 2 hi file.
Did you use only a K/D can cable or did you use and Icom cable?

All done with a K/D Can cable. I'll read the modules and post the TRC files tomorrow.

BTW, I flashed the MULF2 with WinKFP using the K/D Can cable.

Cheers!

[Clammy]

Originally Posted by ctuna

Could you list the contents of the 2urad file and the Mulf 2 hi file.
Did you use only a K/D can cable or did you use and Icom cable?

Here are the TRC files:

2URAD:
-------------------

CODIERUNG_ERFOLGT
codierung_erfolgt
AUDIO_SYSTEM
pl2_top_hifi
top_hifi
HELPNET
nicht_aktiv
PDC
nicht_aktiv
BAUREIHEX
e9x
KEY_MEMORY_R
aktiv
MUTE_TIMES
pl2
BMW_HOME_DEALER
nicht_aktiv
BMW_INITIALIZE
nicht_aktiv
BMW_MOBILE_SERVICE
nicht_aktiv
BMW_PHONE_SERVICES
nicht_aktiv
BMW_ROAMING
nicht_aktiv
BMW_TELESERVICE_ONLY
nicht_aktiv
BMW_ASSIST_RAD2
nicht_aktiv
BMW_HOTLINE_RAD2
nicht_aktiv
CAR_COMP_ACTIVE
aktiv
CONTACT_NR_DEALER
aktiv
CONTACT_NR_HOTLINE
aktiv
CONTACT_NR_MOBILE_SRVC
aktiv
DELTA_GONG_ENT
wert_0
DELTA_PDC_ENT
wert_0
SDV_CURVE
wert_02
VOL_TEL_MIN
wert_0
V_INFO_RAD2
nicht_aktiv
AUDIO_SIGNAL_ROUTING
wert_0
AUX_HEATING
none
OFFSET_ENT_GONG
wert_0
OFFSET_ENT_PDC
wert_0
RAD22_CROSSOVER
e81_stereo
e82_stereo
e84_stereo
e87_stereo
e88_stereo
e91_stereo
e92_stereo
e93_stereo
pl2_hifi
e90_hifi
pl2_top_hifi
RING_MAX
wert_0
RING_MIN
wert_0
SDARS_PHONE_NUMBER_1
wert_0
TIME_DIST_SAME_PRIO
wert_0
TIME_LAG_IMG
wert_0
TIME_OUT_GONG
wert_0
VOL_SRS_MAX
wert_0
VOL_SRS_MIN
wert_0
VOLUME_MAX_ON
wert_0
RAD22_VOLUME_TABLE
pl2_top_hifi
RAD22_VEHICLE_FILTERS
e81_stereo
e82_stereo
e84_stereo
e84_stereo_china
e87_stereo
e88_stereo
e91_stereo
e92_stereo
e93_stereo
pl2_hifi
pl2_top_hifi
RAD22_VOL_TEL_MAX
wert_0
e81_stereo
e87_stereo
RAD22_BMW_AKD
nicht_aktiv
AF_IN_CFG
tel_mute_tel_fix
CENTER_VALUE_VOL_TP_MIN
wert_0
DEFAULT_OFFSET_TP_MIN
wert_0
AUX_RAD22
aux
DELTA_NAV_ENT
standard
RAD22_RATIO_GONGS
e90_top_hifi
VEHICLE_FINDER_MODE
nicht_aktiv
PDC_ADAPTION_F_R_RAD22
e88_top_hifi
e89_stereo
e90_hifi
e90_m_amp
e90_top_hifi
e92_m_amp
RATIO_AUDIO_SOURCES_R22
e90_top_hifi
VOL_GONG_MAX_RAD22
e82_top_hifi
e90_top_hifi
e91_top_hifi
e92_top_hifi
VOL_GONG_MIN_RAD22
e81_stereo
e82_hifi
e84_stereo
e84_hifi
e84_top_hifi
e87_stereo
e89_hifi
e90_top_hifi
e91_m_amp
e91_top_hifi
e93_m_amp
VOL_PDC_MAX_RAD22
e81_stereo
e82_hifi
e84_stereo
e84_hifi
e84_top_hifi
e87_stereo
e90_top_hifi
VOL_PDC_MIN_RAD22
e90_top_hifi
e91_hifi
VOLUME_STEPS_RAD22
e81
e82
e84
e84_china
e87
e90
e91
e92
e93
COUNTRYCODE_RADIO_2
us
M_GROUP_C
l7_dspl_on_hk_amp
ENT_MUTE_ON_CRASH_22
on
MY_INFO_RAD2_20
nicht_aktiv
RING_STATUS_20
aktiv
STOLEN_VEHICLE_MODE_20
nicht_aktiv
VOL_NAV_MAX_RAD22
standard
VOL_NAV_MIN_RAD22
standard
OFFSET_ENT_NAV_RAD22
standard
C20_LIMITER_F_L
top_hifi
C20_LIMITER_F_R
top_hifi
C20_LIMITER_GAIN
top_hifi
e89_hifi
C20_LIMITER_R_L
top_hifi
C20_LIMITER_R_R
top_hifi
==============================================

MULF2:
---------------------

SPRACHE
us
BT_UFN
wert_01
EMERGENCY_NUMBER
wert_01
SYNCML
aktiv
AUDIO_SETUP_1
wert_01
AUDIO_SETUP_2
wert_01
DPD
wert_01
TEL_BUCH_ASYNC_CONTROL
most_control_channel
UNICODE
nicht_aktiv
A2DP_EIN_AUS
nicht_aktiv
API_EIN_AUS
aktiv
API_IPOD_COM_TYPE
ipod_two_wire_seriel
API_IPOD_EIN_AUS
aktiv
API_MTP_EIN_AUS
nicht_aktiv
API_TWO_USB
nicht_aktiv
API_USB_EIN_AUS
aktiv
BT_EIN_AUS
aktiv
CAR_TYPE_IPODLOGO
bmw
DUN_EIN_AUS
nicht_aktiv
ISPEECH_ALLOW_GPS
aktiv
ISPEECH_AUX_CONFIG
mounted
ISPEECH_BAUART_CABRIO
nicht_aktiv
ISPEECH_BAUREIHE_E70
nicht_aktiv
ISPEECH_BAUREIHE_R5X
nicht_aktiv
ISPEECH_BLUETOOTH_NODES
aktiv
ISPEECH_BMW_ASSIST
nicht_aktiv
ISPEECH_BMW_DEALER
aktiv
ISPEECH_BMW_HOTLINE
aktiv
ISPEECH_BMW_MOBILE
aktiv
ISPEECH_BMW_N_DEALER
nicht_aktiv
ISPEECH_CDC
aktiv
ISPEECH_CID
cid_low
ISPEECH_CID_TYPE
static
ISPEECH_DAB
nicht_aktiv
ISPEECH_DIG_AUDIO_SRC
cd-player
ISPEECH_EIN_AUS
nicht_aktiv
ISPEECH_FOND_LOW
nicht_aktiv
ISPEECH_FOND_MID
nicht_aktiv
ISPEECH_HDC
nicht_aktiv
ISPEECH_HUD
nicht_aktiv
ISPEECH_IBOC
nicht_aktiv
ISPEECH_JAPAN
nicht_aktiv
ISPEECH_KLIMA_BASIS
nicht_aktiv
ISPEECH_KLIMA_HIGH
nicht_aktiv
ISPEECH_KLIMA_LOWTEMP
nicht_aktiv
ISPEECH_KLIMA_LOWVENT
aktiv
ISPEECH_MDRIVE
nicht_aktiv
ISPEECH_MDRIVELOW
nicht_aktiv
ISPEECH_MMC
nicht_aktiv
ISPEECH_MMDEVICE
aktiv
ISPEECH_NAVI
nicht_aktiv
ISPEECH_NAVI_TYPE_JP
nicht_aktiv
ISPEECH_NAVI_TYPE_SV
nicht_aktiv
ISPEECH_NIVI
nicht_aktiv
ISPEECH_ONLINE
nicht_aktiv
ISPEECH_PDC
nicht_aktiv
ISPEECH_RDC
nicht_aktiv
ISPEECH_RDS_AF_FUNKTION
aktiv
ISPEECH_RVC
nicht_aktiv
ISPEECH_SDARS
nicht_aktiv
ISPEECH_SINGLETUNER
nicht_aktiv
ISPEECH_SITZHEIZUNG
nicht_aktiv
ISPEECH_SMS
nicht_aktiv
ISPEECH_SPRACHE_US
nicht_aktiv
ISPEECH_STANDHEIZUNG
nicht_aktiv
ISPEECH_STANDLUEFTUNG
aktiv
ISPEECH_TEL_TYPE_BUSI
nicht_aktiv
ISPEECH_TEL_TYPE_ECE
nicht_aktiv
ISPEECH_TEL_TYPE_JAP
nicht_aktiv
ISPEECH_TEL_TYPE_MULF
aktiv
ISPEECH_TEL_TYPE_PROF
nicht_aktiv
ISPEECH_TEL_TYPE_TPP
aktiv
ISPEECH_TMC
nicht_aktiv
ISPEECH_TP_FUNKTION
nicht_aktiv
ISPEECH_TRF
nicht_aktiv
ISPEECH_VA_BPI
nicht_aktiv
ISPEECH_VA_FB
aktiv
ISPEECH_VA_FLAP_DICONFI
nicht_aktiv
ISPEECH_VA_FOND_CLIMATE
nicht_aktiv
ISPEECH_VA_SEATVENT
nicht_aktiv
ISPEECH_VIDEOMODUL
nicht_aktiv
ISPEECH_WEATHERBAND
nicht_aktiv
SORTING_VARIANT_2MULF
standard
TWO_MICROPHONES_ULF2
wert_01
PHONE_TYPE_JAPAN
nicht_aktiv
AUX_IN_GAIN
wert_01
ISPEECH_CA_TMC
nicht_aktiv
ISPEECH_MASK
aktiv
ISPEECH_UNIT_FEET
aktiv
MIC_SOURCE
mic_from_wire
ISPEECH_MDRIVEMENU
nicht_aktiv
ISPEECH_MMDEVICEVIAMULF
aktiv
ISPEECH_OLDTELEMAT_STRUCT
aktiv
ISPEECH_PDC_LOW
nicht_aktiv
ISPEECH_REG
aktiv
ISPEECH_TELESERVICE
nicht_aktiv
MIC2MOST
nicht_aktiv
RESPONSE_ON_HOLD
nicht_aktiv
RING_TONE
wert_01
BT_OBJECT_PUSH
nicht_aktiv
BT_BEDIENHOERER_C12
nicht_aktiv
CONTACT_LIST_C12
nicht_aktiv
DISABLE_NOKIA_WA
nicht_aktiv
INCOMING_CALL_LIST_C12
nicht_aktiv
MULTI_PARTY_CALL_C12
nicht_aktiv
SMS_EIN_AUS_C12
nicht_aktiv
USB_HUB_C13
aktiv
SVS_EIN_AUS_3
aktiv
PHONEBOOK_NAME_DISPL_ORD
last_first
==========================================

Cheers!

[N52bigblock]

Originally Posted by Clammy

A quick update.

Instead of fabricating a harness for the AUX plug to MULF2, I bought a USB/AUX kit off Amazon, for less than 20 bucks (it includes the USB/AUX plug, Fakra cable, and AUX harness).

I removed the large connector (I assume it's meant to go into the USB hub that I didn't install ), and installed the individual terminals into the MULF2 connector, according to the pinout I have. The large AUX connector only had 3 terminals, and I have the pinout for 4. The small connector that goes into the AUX connector has 4 terminals, but pins 1 and 2 are jumpered. So, I installed AUX connector pin 2 into MULF2 connector pin 22, AUX connector pin 3 to MULF2 connector pin 5, and AUX connector pin 1 to MULF2 connector pin 4. Plugged in an mp3 player, chose AUX on the HU, and everything worked perfectly!

I haven't run the wiring up to the armrest yet, since it's winter now, and I don't have a garage to work inside, but I'll be doing that in the spring. For now, I just leave a USB stick plugged into the USB port currently sitting loose in the trunk. It's so awesome to have that functionality.

As a side note, I also installed the components for Bluetooth (BT antenna, speaker, microphone), added S644 to the VO, default coded the HU and MULF2, and I have full BT/voice command functionality.

Also, my original HU had the typical display panel lcd fade out, so I replaced it. I found one manufactured in late 2008 on Ebay, so I also coded the Kombi for the updated gongs. Easy peasy, thanks to the info on this site.

Thanks to all who helped me out!

Cheers!

I don't suppose you have a link for the usb kit you got on Amazon? I can't seem to find it.

I'm currently going through the same issue as you with the usb. Going to try and add +ulf2 to vo now.

[Clammy]

Originally Posted by neilj35

I don't suppose you have a link for the usb kit you got on Amazon? I can't seem to find it.

I'm currently going through the same issue as you with the usb. Going to try and add +ulf2 to vo now.

This is the kit I bought. And wow, the price has dropped by more than 50%! I only used the AUX wiring harness from it, so I have no idea how good the fakra cable or USB/Aux socket are, but for 8 bucks, it's worth a try!

https://www.amazon.ca/gp/product/B07...?ie=UTF8&psc=1

Cheers!