|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
CIC switching inputs on startup
|
|
04-04-2020, 03:50 AM | #1 |
Private
6
Rep 57
Posts |
CIC switching inputs on startup
2010 CIC logic 7. My unit is not retaining the last selected input. If I turn the car off on say satellite radio and come back it will start at some am station the go to gym in about 45 seconds. Anyone know how to correct this? Is there a hard reset to delete every setting in CIC to factory? I already tried holding mute for 25 seconds, it just reboots and the problem is the same.
|
04-10-2020, 12:42 PM | #4 |
Private
6
Rep 57
Posts |
|
Appreciate
0
|
04-10-2020, 02:22 PM | #5 |
Lieutenant General
2045
Rep 13,364
Posts |
Above 12.4 or above .
I would try putting a slow full charge on the battery and see if things change. and it shouldn't drop so much that it resets the date on startup. |
Appreciate
0
|
04-16-2020, 03:41 PM | #6 |
Private
6
Rep 57
Posts |
Yeah it's good and I keep a tender on it. Not losing time/date either. No reply in idrive sub either. Seems this isues happened when subscription to xm lappsed. I renewed but the issues is the same. Turn on car idrive starts on Am the jumps to fm. When I usually leave the input to aux. Even if I change it to aux on start up is still jumps to am then fm. Is there a way to hard reset the entire idrive?
|
Appreciate
0
|
Bookmarks |
|
|