|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Optimum Hyper Polish Spray - Anyone using this?
|
|
04-21-2020, 03:25 PM | #1 |
Brigadier General
2508
Rep 3,640
Posts |
Optimum Hyper Polish Spray - Anyone using this?
If anyone is using this product could you provide your feedback?
autogeek.net reviews are pretty positive. |
04-23-2020, 07:22 PM | #2 |
Captain
737
Rep 744
Posts |
I use both HyperCompound & HyperPolish.
I love them. They can be worked almost forever, and they don't dust. Be sure you have ONR diluted as a detailer for polish removal (see directions on the HyperPolish bottle). The HyperPolish is a polish, so if you have some correction to do, you'll need something with a bit more cut to it. One note: when finished polishing, remove the spray head from the bottle, spray the residual product from the spray head back into the bottle (don't waste), then flush the sprayer with hot water, and recap the bottle. Store the sprayer separately. Failure to clear the sprayer before storage will result in the sprayer being unusable if the residual product dries in the hose/head. |
Appreciate
1
Wolf 3352507.50 |
04-23-2020, 08:10 PM | #3 |
Private First Class
150
Rep 170
Posts |
Great light to medium cut polish. Menzerna 3500 is about the same, maybe a little more cut.
For me those 2 are less finicky than Meguiars 205. Hyper Polish is a great all around polish to own. I haven't used it on my BMW since I stick to Menzerna. |
Appreciate
1
Wolf 3352507.50 |
04-24-2020, 05:34 AM | #4 | |
Captain
737
Rep 744
Posts |
Quote:
The main difference for me is that the OPT doesn't stain textured black plastic trim as much as the Menzerna, and it doesn't seem to leave as much in the gaps/seams. When using Menzerna, I tape all seams. When using OPT I just pass right over them. Removing the Menzerna is a bit easier, as it dries to a powder and can be wiped away easily, where the OPT never dries completely, and so needs a lubricant/cleaner to get it off the paint completely and without marring. Both are great products, but I find OPT to be easier & more forgiving. As I get up there in years, the less work I have to do (to get the same results) the more I appreciate it. |
|
Appreciate
1
Wolf 3352507.50 |
04-24-2020, 09:22 AM | #5 |
Brigadier General
2508
Rep 3,640
Posts |
Thank you guys, i appreciate your feedback.
I wanted something that will provide a bit of cut with right pad and then polish off with another pad. After polishing I would be applying Opti-seal. I'm on the fence between Optimum Hyper Polish and SONAX ProfiLine Perfect Finish. |
Appreciate
0
|
Bookmarks |
|
|