335is Pure600s dyno day

Mikes 335is · 06-13-2020, 09:28 PM

Pure600s, EOS port injection, stage 3 fuel pump with Hobbs switch, flex fuel kit, MHD flash , motiv tuned.. 25 psi with room to go still but had to cutt it short due to temps of over 100° in the dyno on a very hot day

Boosted12a · 06-13-2020, 10:54 PM

Good numbers. What was the at the wheel?

e92jonathan · 06-14-2020, 12:03 AM

Nice numbers, I'm same turbos but I'm on an e30 mix from motiv. Are you on Full e85?

Mikes 335is · 06-14-2020, 12:28 AM

Quote:

Originally Posted by e92jonathan

Nice numbers, I'm same turbos but I'm on an e30 mix from motiv. Are you on Full e85?

No I did a custom fuel flex kit

_N54 · 06-14-2020, 01:45 PM

Nice! Are the DCT clutches holding up fine with that whp/tq?

Mikes 335is · 06-15-2020, 11:07 PM

Quote:

Originally Posted by ///S58

Nice! Are the DCT clutches holding up fine with that whp/tq?

Crazy the DCT started slipping the first day out the dyno on hard pulls on highway 😩

mike@x-ph.com · 06-16-2020, 11:06 AM

Saif2018 · 06-16-2020, 05:10 PM

Quote:

Originally Posted by Mikes 335is

Crazy the DCT started slipping the first day out the dyno on hard pulls on highway 😩

Is there no flash available for dct with increased clamping pressure?

_N54 · 06-17-2020, 12:44 AM

Quote:

Originally Posted by Saif2018

Is there no flash available for dct with increased clamping pressure?

No. Only flash is just a 1M flash that decreases launch RPM from 5000 to 3000. You got simply upgrade the clutches on the DCT.

_N54 · 06-17-2020, 12:45 AM

Quote:

Originally Posted by Mikes 335is

Crazy the DCT started slipping the first day out the dyno on hard pulls on highway 😩

Damn blows my mind. I guess ill need clutch upgrades later since I'm planning on going 600+ myself.

NoGuru · 06-19-2020, 07:06 AM

Quote:

Originally Posted by ///S58

Damn blows my mind. I guess ill need clutch upgrades later since I'm planning on going 600+ myself.

I would wait, I am around 550ish and do not feel any slipping.

_N54 · 06-19-2020, 01:41 PM

Quote:

Originally Posted by NoGuru

I would wait, I am around 550ish and do not feel any slipping.

I will probably tune the car around 550-575whp and see how it holds up, but will upgrade the clutches when i want to tune around 650whp.

SpunkyXL · 06-19-2020, 02:39 PM

dope..what shop in NYC?

JupiterBMW · 06-21-2020, 12:50 AM

Wow, that is an impressive curve. I have an E90 M3 with a Harrop supercharger, and I recently dyno'd at 565whp/435wtq. My torque peak was right around 4300rpm, and I too felt a little bit of clutch slip in my car (DCT). Definitely don't feel like I can go WOT in 1st or 2nd gear...

Have you done aftermarket clutches, and if so, what brand??

Mikes 335is · 06-25-2020, 09:12 AM

Quote:

Originally Posted by SpunkyXL

dope..what shop in NYC?

Did everything In New Jersey Bmb Autowerks

Mikes 335is · 06-25-2020, 09:14 AM

Quote:

Originally Posted by JupiterBMW

Wow, that is an impressive curve. I have an E90 M3 with a Harrop supercharger, and I recently dyno'd at 565whp/435wtq. My torque peak was right around 4300rpm, and I too felt a little bit of clutch slip in my car (DCT). Definitely don't feel like I can go WOT in 1st or 2nd gear...

Have you done aftermarket clutches, and if so, what brand??

I haven’t done the clutches yet but soon I will

335e92tx · 07-03-2020, 08:01 AM

Quote:

Originally Posted by Mikes 335is

I haven’t done the clutches yet but soon I will

DCT yoda

https://www.facebook.com/groups/1416734471743071/

06-13-2020, 09:28 PM	#1
Mikes 335is Private First Class 80 Rep 194 Posts Drives: 2011 335 is Join Date: Feb 2016 Location: Bronx iTrader: (0)	335is Pure600s dyno day Pure600s, EOS port injection, stage 3 fuel pump with Hobbs switch, flex fuel kit, MHD flash , motiv tuned.. 25 psi with room to go still but had to cutt it short due to temps of over 100° in the dyno on a very hot day Attached Images
	Appreciate 0 Tweet Quote

06-13-2020, 10:54 PM	#2
Boosted12a Second Lieutenant 69 Rep 210 Posts Drives: BMW 335i x Join Date: Jun 2019 Location: Va iTrader: (0)	Good numbers. What was the at the wheel?
	Appreciate 0 Quote

06-14-2020, 12:03 AM	#3
e92jonathan OG 4 Rep 23 Posts Drives: 2008 e92 335i Join Date: Sep 2016 Location: cerritos, ca iTrader: (0)	Nice numbers, I'm same turbos but I'm on an e30 mix from motiv. Are you on Full e85? __________________ N54 FBO, PURE600, MOTIV CUSTOM TUNE E30
	Appreciate 0 Quote

06-14-2020, 01:45 PM	#5
_N54 Captain 302 Rep 884 Posts Drives: 335d Join Date: Mar 2020 Location: USA iTrader: (0)	Nice! Are the DCT clutches holding up fine with that whp/tq? __________________ 2013 335is - sold 2011 335d
	Appreciate 0 Quote

06-16-2020, 11:06 AM	#7
mike@x-ph.com BimmerPost Supporting Vendor 26926 Rep 195,900 Posts Drives: 07-335/12-328/18-M4/21-M4CP Join Date: Sep 2013 Location: Las Vegas iTrader: (23)	__________________ Check out our current sale by clicking on this link! https://x-ph.com/sale/ Phone number 702-494-9435
	Appreciate 0 Quote

06-19-2020, 02:39 PM	#13
SpunkyXL First Lieutenant 141 Rep 362 Posts Drives: 07' 335i Coupe Join Date: Mar 2012 Location: NYC iTrader: (2)	dope..what shop in NYC? __________________ http://instagram.com/spunkyxl http://instagram.com/e92Nav
	Appreciate 0 Quote

06-21-2020, 12:50 AM	#14
JupiterBMW Self Proclaimed Roundel Junkie 740 Rep 1,687 Posts Drives: '21 X7M50i, '18 X5d, '13 1M3 Join Date: Aug 2012 Location: Jupiter, FL iTrader: (6)	Wow, that is an impressive curve. I have an E90 M3 with a Harrop supercharger, and I recently dyno'd at 565whp/435wtq. My torque peak was right around 4300rpm, and I too felt a little bit of clutch slip in my car (DCT). Definitely don't feel like I can go WOT in 1st or 2nd gear... Have you done aftermarket clutches, and if so, what brand?? __________________ 2013 E82 1M3 - Carbon Black/Black S65/DCT Track Toy 2018 F15 X5d - Carbon Black/Nutmeg Individual Oil Burner Tow Rig 2021 G07 X7 M50i - Tanzanite Blue/Ivory White & Night Blue German American Family Rig Former Family: '13 F25 X3 35i, '11 E91 335is, '11 E90 M3, '10 E70 X5M, '14 F30 328d, '03 E46 330i Dinan3 ZHP, '04 E46 330i ZHP, '12 F25 X3 35i
	Appreciate 0 Quote