[mider111]

I have a BMW 2006 325i and my rear left window stopped working a while ago and the anti trap function pops on the dash every 15-20 seconds. I checked the motor, the regulator, and the footwell module. All of those did not fix the issue.
Image:

View post on imgur.com

Any suggestions what might be causing this because I am out of ideas?

[Bimmer_Engineer]

Did you search for how to reset the anti-trap function? I had to do it after I replaced the motor and regulator...

[mider111]

Originally Posted by Bimmer_Engineer

Did you search for how to reset the anti-trap function? I had to do it after I replaced the motor and regulator...

I did but to reset the anti trap function your window needs to be working. Mine does not, which makes it a bigger problem. All the videos or posts I found are for resetting the anti trap function but require the window to work.

[gbalthrop]

Originally Posted by mider111

I have a BMW 2006 325i and my rear left window stopped working a while ago and the anti trap function pops on the dash every 15-20 seconds. I checked the motor, the regulator, and the footwell module. All of those did not fix the issue...Any suggestions what might be causing this because I am out of ideas?

See Post #14 for what an owner of a 2007 335i did with similar issue. I'm NOT clear on exactly WHICH step got motor to work again (it quit after he removed fuse F62 in attempt to stop Error Message & Warning Icon), so you might ask him for clarification.
https://www.e90post.com/forums/showthread.php?t=1741164

In his case, "Re-initializing" ALL windows did NOT cause Warning Light (& Chime) to go away. He apparently did NOT have a Scan Tool or Software that could connect to the JBE (to which rear Windows are wired) to Read & Clear any Fault Code. If you have INPA running, let me know & I can suggest HOW to do that.

George

[mider111]

Originally Posted by gbalthrop

See Post #14 for what an owner of a 2007 335i did with similar issue. I'm NOT clear on exactly WHICH step got motor to work again (it quit after he removed fuse F62 in attempt to stop Error Message & Warning Icon), so you might ask him for clarification.
https://www.e90post.com/forums/showthread.php?t=1741164

In his case, "Re-initializing" ALL windows did NOT cause Warning Light (& Chime) to go away. He apparently did NOT have a Scan Tool or Software that could connect to the JBE (to which rear Windows are wired) to Read & Clear any Fault Code. If you have INPA running, let me know & I can suggest HOW to do that.

George

I have a DKAN cable and INPA installed on my laptop but I couldn't connect to the car. Any ideas?