[javeci01]

Hi everyone.

I was trying to flash RSA Delete to my 2007 328i. I checked before flashing that INPA worked, and I was able to read codes and check live readings.

When I started flashing RSA Delete, it appeared everything was working, but then WinFPK crashed and exited. I then received the following message in the DOS.

[C:\EC-APPS\NFS\BIN\MSV80.ctl] [19.08.2020, 21:47:31]

[MULTIFLASH]
MF_FG_NUMMER=
MF_PABD=12msv80.ipo
MF_PSGBD=12MSV80.prg
MF_SG_ADR=12
MF_NAAB_DATEI=
MF_PROGRAMM_DATEI=MSV80_RSADelete_0049QK0MI20S.0pa
MF_DATEN_DATEI=
MF_DIAGNOSEPROTOKOLL=
HW interface activted.
PABD set.
P-SGBD set.
INFO000=Error: Error 106: Error on setting ECU-Adress. Please check: Interface, PABD, P-SGBD
INFO001=Error: Error 2000: Error LFCDHDIA.CPP (12msv80.IPS/IPO) CDHapiResultText 1 Error in EDIABAS or in ECU description file (SGBD) SYS-0010: Initialization error 12MSV80
INFO002=Error: Error 2000: Error COAPI2.CPP coapiRunCabd 6 Error in EDIABAS or in ECU description file (SGBD) SET_ECU_ADDRESS
INFO003=Error: Error 2000: Error COAPIKF.CPPcoapiKfSetGlobalPabdSgbdEcuAddr 5 Error in EDIABAS or in ECU description file (SGBD) Run SET_ECU_ADDRESS Job
Error: ECU-Address could not be set!
ERG=Programming not ok. Fatal Error
Batch mode ended
Press any key to continue . . .

Now my car cranks, but won't start.

Any help would be appreciated. I really hope I didn't brick my DME.

I checked and I still have access to INPA and can read codes for whatever that is worth.

Apologies to E92William for hijacking his thread yesterday while in a state of despair/terror.

Thanks!

[fastboatster]

Mb try to flash stock sw back? Or try to repeat the RSA flash again. Are you running in VM? Not msv related but I tried to flash some other tricore ecu 2 days ago from Windows VM on my mac and the flash failed 2 times in a row. Granted, it was some aftermarket flasher so probably not as good as winkfp but you get the idea.

[nsjames]

i've gotten him through importeing the required files into winkfp

we're now here:

[MULTIFLASH]
MF_FG_NUMMER=
MF_PABD=12msv80.ipo
MF_PSGBD=12MSV80.prg
MF_SG_ADR=12
MF_NAAB_DATEI=
MF_PROGRAMM_DATEI=MSV80_RSADelete_0049QK0MI20S.0pa
MF_DATEN_DATEI=
MF_DIAGNOSEPROTOKOLL=
HW interface activted.
PABD set.
P-SGBD set.
ECU-Address set.
Data and/or program and/or NAAB file set.
Program will be programmed.
INFO000=Error: Error 211: Error on flash programming!
INFO001=Error: Error 2089: PABD 05MSV80 Programmieren 2544 switching programming mode failed 12MSV80, DIAGNOSE_MODE (ECUPM): ERROR_ECU_SECURITY_ACCESS_DENIED__SECURITY_ACCESS_ REQUESTED
INFO002=Error: Error 2084: PABD 05MSV80 FlashSchreiben 1448 Flash download failed 12MSV80, FLASH_SCHREIBEN (...): ERROR_ECU_INCORRECT_BYTE_COUNT_DURING_BLOCK_TRANSF ER
INFO003=Error: Error 2084: PABD 05MSV80 Programmieren 3247 Flash download failed 12MSV80, FLASH_SCHREIBEN (...)
INFO004=Error: Error 2084: Error COAPI2.CPP coapiRunCabd 6 Flash download failed SG_PROGRAMMIEREN
INFO005=Error: Error 2084: Error COAPIKF.CPP coapiKfProgSgDevelop 4 Flash download failed
ERG=Programming not ok. Fatal Error
Batch mode ended
Press any key to continue . . .

[javeci01]

Thanks, I am trying to flash the RSA delete again. Its going very slow 10% in 20 minutes.

[javeci01]

It worked! Thanks everyone who helped out! What an amazing group of people on here.

[bluewater328]

So what was the underlying issue. Just old DATEN?

[Mantraxalos]

Originally Posted by javeci01

It worked! Thanks everyone who helped out! What an amazing group of people on here.

Great, now I'm going to be asking you for advice when I finally get to the Zed!

[javeci01]

Yes, it worked after downloading the e89 daten and importing.

nsjames shared the below PDF which was very helpful. EXCEPT DO NOT do the last part of the PDF, the WinFPK configuration (use the Bimmerlabs WinFPK configuration, at least that's what I did).

https://www.e90post.com/forums/attac...=1432591135#:~

[Mantraxalos]

Nice, I'll try to get mine done on Sunday.

[E92William]

Glad you got it sorted. No big deal about hijacking the other thread. It's kind of there half for troubleshooting and half for new things lol

[Alexvier]

Yes I’m getting a no crank start now too from doing the RSA delete. There was a few errors and after trying the 0da files there’s no response now.

I tried the RSA delete a couple of times but now there’s just no communication with the car.

Does the RSA unlock the DME with just the altering the power class?

How can you undo the RSA delete?

[cosmosschwarz]

Originally Posted by Alexvier

Yes I’m getting a no crank start now too from doing the RSA delete. There was a few errors and after trying the 0da files there’s no response now.

I tried the RSA delete a couple of times but now there’s just no communication with the car.

Does the RSA unlock the DME with just the altering the power class?

How can you undo the RSA delete?

If the RSA delete fails, you need to reload the stock tune saved on the bimmerlabs page, then try the RSA delete again.

[nthanos330i]

Hi everyone -- Sorry to hijack this thread, but I am running into the same problem that the OP did some years back while trying to flash the RSA delete in order to do my 3-stage manifold tune from Bimmerlabs.

I used Mike's Easy BMW Tools for the software and have configured WinKFP per the Bimmerlabs instructions. I also used the BMW Coding tool to update the data for WinKFP and NCS Expert to V69 (the newest I could easily get my hands on). This fixed my connection error with my R53 with NCS expert and I assumed WinKFP would now be working properly as well, but whenever I go to run the Bimmerlabs RSA delete batch file, I get the exact same error as the OP.

I'm very new to all of this, so would appreciate any help/direction. I'm eager to get the car tuned!

[firesnatch]

I can give you a copy of the software that I used to flash my car successfully. PM me and i'll send you a link and instructions.