[Nickdot]

Hi guys,

A few months back I retrofitted LCI xenons to my halogen equipped E90 LCI.

Internal headlight wiring modification done, and fitted, updated and coded an FRM3 MAX BROSE to the car, which all seemed to be working well.

However.. I do not have main beam/flash to pass.

The icon on the dash cluster illuminates, but the shutter does not make a sound.

Main beam can be activated from within INPA, with the shutter working perfectly.

Any ideas as to what could be causing the disconnect between the two?

I have reprogrammed the FRM to stock a few times, just to sanity check, but it doesn't make a difference.

Any help would be massively appreciated.

[sdbmwcoding]

What is the wert value of PWM_FL_BEI_BIXENON? Change it to wert_01 if it's wert_02 or wert_03 and the high beams will work

[Nickdot]

Originally Posted by sd*********

What is the wert value of PWM_FL_BEI_BIXENON? Change it to wert_01 if it's wert_02 or wert_03 and the high beams will work

Spot on the money - they work like a dream now.

Thank you!