RiXeffects Digital Boost Gauge / Map Switch

RiXst3r · 10-08-2008, 09:12 PM

PATENT PENDING!

I wanted to show off the Map Switcher section of my boost gauge, so that everyone can see

As you all know, the JuiceBox 3 holds 4 maps, 3 of which are currently activated with the tiny 22 dollar physical map switch.

I have developed in my boost gauge the ability to control the jb3 to select all 4 maps.

In my gauges, I call this section *Boost Control* or bc for short... since your are basically controlling your boost maps.

Map 1 (bc.1) = Low Boost (12.5 psi)
Map 2 (bc.2) = High Boost (15psi)
Map 3 (bc.3) = Stock (8psi)
Map 4 (bc.4) = Race Gas! (under development)

To access the boost control menu, you just use the PEAK RECALL button.
HOLD DOWN the peak recall button for 1 second, and you will enter the boost control menu. Tap the button to select 1 through 4 and then when you stop on a selection for more than 3 seconds, it defaults back to boost gauge mode, and selects the map! Thats it, you can even do it while the car is running, and your map is selected instantly! This map is also flashed back to you when you start the car, and the map is saved, so every time you start the car, you are running whatever map you have selected!

As always, visit www.rixeffects.com for more info.

See the video to see it in action!

In this video I start the car, enter the boost control menu, switch to a different map, rev the engine, and then restart the car so you can see how the map is stored instantly (restart not required). Then I press the peak recall button to recall the max boost of 0.0 psi

For those of you that will ask "why is there no boost showing" well, its because I am in my garage, revving my engine... so all you get is manifold vacuum... if you want boost, you gotta put load on the engine!

FOR PRICING AND AVAILIBILITY, VISIT MY OFFICIAL THREAD IN THE SPONSOR SECTION: http://www.e90post.com/forums/showthread.php?t=159756

san~man · 10-08-2008, 09:40 PM

Fuggin awesome Rick

e90AW335i · 10-08-2008, 09:57 PM

Looks good Rick, congrats on bringing this to market!

GGreek5 · 10-08-2008, 10:01 PM

Nice!!! Cant wait for mine!

diskopotato · 10-08-2008, 10:37 PM

Damm, that's nice. The led status bar has no delay whatsoever and it's at all distracting. Looks awesome.

cipher5 · 10-08-2008, 10:42 PM

Rick, you've done it again, looks great!

skim7x · 10-08-2008, 10:44 PM

woooow... impressive!!

bubbletea 4 me · 10-08-2008, 11:06 PM

i want, i want. how much are we looking at?

RiXst3r · 10-08-2008, 11:19 PM

Quote:

Originally Posted by bubbletea 4 me

i want, i want. how much are we looking at?

All the details are here:
http://www.e90post.com/forums/showthread.php?t=159756

bubbletea 4 me · 10-08-2008, 11:24 PM

thanx Rick. so i'm assuming the new gauges will all come with map switcher right?

RiXst3r · 10-08-2008, 11:26 PM

Quote:

Originally Posted by bubbletea 4 me

thanx Rick. so i'm assuming the new gauges will all come with map switcher right?

Yes, all of them have it... including everyone that already ordered before I even announced the boost switcher... they get a "free bonus"

exidisjon · 10-09-2008, 02:09 AM

Dam i need to get one of these asap...Was shopping for a boost gauge.

Is the install and uninstall be easy compare to the JB3 pin out? Or would it be ok to bring it to dealer with the gauge on and off course JB3 uninstalled..
Also is the map switch not needed if this is installed?

THanks

WOPALX · 10-09-2008, 03:00 AM

Rick,

How's the RHD version coming?

Cheers,

S

LODOSS · 10-09-2008, 03:48 AM

Looks awesome!

Any news on the cruise map?

RiXst3r · 10-09-2008, 07:36 AM

Quote:

Originally Posted by exidisjon

Dam i need to get one of these asap...Was shopping for a boost gauge.

Is the install and uninstall be easy compare to the JB3 pin out? Or would it be ok to bring it to dealer with the gauge on and off course JB3 uninstalled..
Also is the map switch not needed if this is installed?

THanks

This replaces the 22 dollar physical map switch. It has a plug that fits right into the jb3 mapswitch connector, so its super easy!

-Rick

BES335xi · 10-09-2008, 09:00 AM

wow fuckin' sick! Congrats Rick..Looks awesome.

munters · 10-09-2008, 09:34 AM

Quote:

Originally Posted by RiXst3r

This replaces the 22 dollar physical map switch. It has a plug that fits right into the jb3 mapswitch connector, so its super easy!

-Rick

Is it possible to have another "free bonus" ?

I don't need (want) the aditionnal cable through the whole car into the ECU Box.

RiXst3r · 10-09-2008, 09:36 AM

Quote:

Originally Posted by munters

Is it possible to have another "free bonus" ?

I don't need (want) the aditionnal cable through the whole car into the ECU Box.

Not sure what you are asking for...

BlueLion · 10-09-2008, 09:44 AM

how has the testing of this feature with procede been going?

5soko · 10-09-2008, 09:54 AM

Very nice, congrats.

stevenc · 10-09-2008, 10:12 AM

1 series gauage plz!

RiXst3r · 10-09-2008, 10:31 AM

Quote:

Originally Posted by BlueLion

how has the testing of this feature with procede been going?

Hopefully will test this weekend, gotta check with my buddy to make sure he can still stop by.

-Rick

10-08-2008, 09:12 PM	#1
RiXst3r 292 Rep 6,510 Posts Drives: M235i Join Date: Sep 2006 Location: Ohio iTrader: (14)	RiXeffects Digital Boost Gauge / Map Switch - JB3 map switching in action! (video) PATENT PENDING! I wanted to show off the Map Switcher section of my boost gauge, so that everyone can see As you all know, the JuiceBox 3 holds 4 maps, 3 of which are currently activated with the tiny 22 dollar physical map switch. I have developed in my boost gauge the ability to control the jb3 to select all 4 maps. In my gauges, I call this section Boost Control or bc for short... since your are basically controlling your boost maps. Map 1 (bc.1) = Low Boost (12.5 psi) Map 2 (bc.2) = High Boost (15psi) Map 3 (bc.3) = Stock (8psi) Map 4 (bc.4) = Race Gas! (under development) To access the boost control menu, you just use the PEAK RECALL button. HOLD DOWN the peak recall button for 1 second, and you will enter the boost control menu. Tap the button to select 1 through 4 and then when you stop on a selection for more than 3 seconds, it defaults back to boost gauge mode, and selects the map! Thats it, you can even do it while the car is running, and your map is selected instantly! This map is also flashed back to you when you start the car, and the map is saved, so every time you start the car, you are running whatever map you have selected! As always, visit www.rixeffects.com for more info. See the video to see it in action! In this video I start the car, enter the boost control menu, switch to a different map, rev the engine, and then restart the car so you can see how the map is stored instantly (restart not required). Then I press the peak recall button to recall the max boost of 0.0 psi For those of you that will ask "why is there no boost showing" well, its because I am in my garage, revving my engine... so all you get is manifold vacuum... if you want boost, you gotta put load on the engine! FOR PRICING AND AVAILIBILITY, VISIT MY OFFICIAL THREAD IN THE SPONSOR SECTION: http://www.e90post.com/forums/showthread.php?t=159756 Attached Images Last edited by RiXst3r; 10-08-2008 at 11:06 PM..
	Appreciate 0 Tweet Quote

10-08-2008, 09:40 PM	#2
san~man Tired 136 Rep 2,673 Posts Drives: BMW-less Join Date: Nov 2007 Location: USA iTrader: (7)	Fuggin awesome Rick __________________ BMW-less
	Appreciate 0 Quote

10-08-2008, 09:57 PM	#3
e90AW335i Major General 145 Rep 6,608 Posts Drives: e90 335i Join Date: Sep 2007 Location: ...... iTrader: (4)	Looks good Rick, congrats on bringing this to market! __________________ I install all tunes, intakes, o2 simms, and most cosmetic mods. PM me for a quote.
	Appreciate 0 Quote

10-08-2008, 10:01 PM	#4
GGreek5 Olimpiakos 94 Rep 1,426 Posts Drives: M3 Join Date: Apr 2008 Location: Mass iTrader: (10)	Nice!!! Cant wait for mine!
	Appreciate 0 Quote

10-08-2008, 10:37 PM	#5
diskopotato New Member 1 Rep 20 Posts Drives: 08 E92 335i Join Date: Jul 2008 Location: Toronto iTrader: (0)	Damm, that's nice. The led status bar has no delay whatsoever and it's at all distracting. Looks awesome.
	Appreciate 0 Quote

10-08-2008, 10:42 PM	#6
cipher5 564 Rep 3,472 Posts Drives: 2020 Donington Grey X3M Comp Join Date: Jul 2007 Location: Chicago, IL iTrader: (12)	Rick, you've done it again, looks great!
	Appreciate 0 Quote

10-08-2008, 10:44 PM	#7
skim7x Colonel 215 Rep 2,558 Posts Drives: 335i, C63 AMG Join Date: Sep 2006 Location: USA iTrader: (4) Garage List 2007 335i [10.00]	woooow... impressive!! __________________ '07 Space Gray 335i coupe - R.I.P. COBB ProTuned \| AMS \| CP-e \| BMS \| Quaife
	Appreciate 0 Quote

10-08-2008, 11:06 PM	#8
bubbletea 4 me Lieutenant Colonel 63 Rep 1,914 Posts Drives: Finally here Join Date: Dec 2007 Location: Earth iTrader: (5)	i want, i want. how much are we looking at?
	Appreciate 0 Quote

10-08-2008, 11:24 PM	#10
bubbletea 4 me Lieutenant Colonel 63 Rep 1,914 Posts Drives: Finally here Join Date: Dec 2007 Location: Earth iTrader: (5)	thanx Rick. so i'm assuming the new gauges will all come with map switcher right?
	Appreciate 0 Quote

10-09-2008, 02:09 AM	#12
exidisjon PuffPuffPass 56 Rep 1,096 Posts Drives: E92 335xi AW/Saddle Join Date: Aug 2008 Location: NJ iTrader: (8)	Dam i need to get one of these asap...Was shopping for a boost gauge. Is the install and uninstall be easy compare to the JB3 pin out? Or would it be ok to bring it to dealer with the gauge on and off course JB3 uninstalled.. Also is the map switch not needed if this is installed? THanks __________________ My right foot weighs more than my left for sure.
	Appreciate 0 Quote

10-09-2008, 03:00 AM	#13
WOPALX Lieutenant Colonel 93 Rep 1,993 Posts Drives: 335i Sedan Join Date: May 2007 Location: Sydney, Australia iTrader: (2)	Rick, How's the RHD version coming? Cheers, S
	Appreciate 0 Quote

10-09-2008, 03:48 AM	#14
LODOSS First Lieutenant 6 Rep 306 Posts Drives: AW 335 E92 Join Date: Jun 2007 Location: VA iTrader: (1)	Looks awesome! Any news on the cruise map?
	Appreciate 0 Quote

10-09-2008, 09:00 AM	#16
BES335xi Colonel 93 Rep 2,132 Posts Drives: FBO+ N54xi Join Date: Mar 2008 Location: Queens, NYC iTrader: (4) Garage List 03/07 E90 335xi [1.00]	wow fuckin' sick! Congrats Rick..Looks awesome. __________________ JB4+usb \| P3 Vent Boost Gauge v2 \| BMS OCC \| BMS DCI \| AMS FMIC \| AR xi CL DP's \| BT Tool \| Edibias/NCSExpert/INPA BMW Coding \| Cyba Quad Exhaust tips \| M-Tech Rear & M3 Front Bumper \| Red Cyba Air Scoops \| Blacklines \| Vinyl Overlays \| ACS Roof Spoiler \| Matte Black Grilles \| LED Side Mirrors \| Rear Euro Fogs \| etc.. .
	Appreciate 0 Quote

10-09-2008, 09:44 AM	#19
BlueLion she likes the flavor...... 86 Rep 1,622 Posts Drives: A51-E92 Join Date: Nov 2006 Location: Bradenton - FL iTrader: (4) Garage List 2022 X3MC [0.00]	how has the testing of this feature with procede been going? __________________ E92 Montego Blue silfa718 ..::STETT CAI\|ADVAN RS\|WAGNER FMIC\|MS DP\|VANGUARD\|PROCEDE\|FORGE DV\|BMS OCC\|KWV2\|MICHELIN PSS\|OOS::..
	Appreciate 0 Quote

10-09-2008, 09:54 AM	#20
5soko Brigadier General 352 Rep 4,633 Posts Drives: M5 Join Date: Aug 2007 Location: Brooklyn, NY iTrader: (4)	Very nice, congrats.
	Appreciate 0 Quote

10-09-2008, 10:12 AM	#21
stevenc Coming Soon 256 Rep 960 Posts Drives: 2015 BMW M4 Alphine White MT Join Date: Apr 2008 Location: Houston, TX iTrader: (0)	1 series gauage plz!
	Appreciate 0 Quote