[mike@x-ph.com]

Order Link
https://x-ph.com/bmw-rpi-v3-ram-air-induction-scoop-bmw-e90-92-335i-m3/


RPi's Ram Air Scoops converts your factory intake system into a ram air type. Other aftermarket induction kits mostly suck in hot air causing a loss of performance. The use of heatshields are not very affective as heat shields mainly work to block radiant heat. Utilizing the stock intake box, our ram air scoops push outside air into the stock air box, providing improved airflow to the well designed OEM intake system. Expect a 4-6whp gain (Dyno Dynamics w/ Patterson 13kcfm fan at 8ft, 2.5degree fan angle on 2011 M3).

RPi E92/90 Scoops Installation Instructions

1. remove grills
2. remove top intake duct
3. insert scoops from the grill opening as pictured. The inside tab will hook over the top of the intake hole (see picture)
4. insert top intake duct
5. Line up the scoop mounting hole with the intake duct, etc. Insert the OEM mounting pin. (This is a TIGHT fit. The hole on the scoop will be slightly wider towards the outside of the car. This is done be design so that you will have to push the scoop inward. This creates tension on the outside tab so that the scoop installs more securely)

[mike@x-ph.com]

[mike@x-ph.com]

[mike@x-ph.com]

[mike@x-ph.com]

[mike@x-ph.com]

[mike@x-ph.com]

[mike@x-ph.com]