|
|
|
|
 |
 
|
 |
BMW Garage | BMW Meets | Register | Today's Posts | Search |
 |
|
BMW 3-Series (E90 E92) Forum
>
Ohlins RT coilovers
|
 |
| 12-03-2020, 02:54 PM | #1 |
|
Enthusiast
14
Rep 56
Posts |
Ohlins RT coilovers
$460 buyer pays shipping. 40k highway miles. Comes with everything except for springs. Fully adjustable.
__________________
RB Twos with high heat wastegates, MMP DPs, RB inlets, RB PCV valve and cap, BMS DCIs, BMS OCC, BMS BOV adapter, ER charge pipe, VRSF 7.5" race intercooler, Fuel-It! stage 2 LPFP, Forge diverters, JB4 w/ backend flash, Öhlins R/T adjustable coilovers, swift springs, stiffer anti-roll bars, M3 control arms, Vorshlag camber plates, Quaife limited slip differential.
|
| 12-03-2020, 03:00 PM | #2 | |
|
Brigadier General
 
619
Rep 3,398
Posts |
Quote:
__________________
 |
|
|
Appreciate
0
|
| 12-03-2020, 03:01 PM | #3 | ||
|
Enthusiast
14
Rep 56
Posts |
Quote:
__________________
RB Twos with high heat wastegates, MMP DPs, RB inlets, RB PCV valve and cap, BMS DCIs, BMS OCC, BMS BOV adapter, ER charge pipe, VRSF 7.5" race intercooler, Fuel-It! stage 2 LPFP, Forge diverters, JB4 w/ backend flash, Öhlins R/T adjustable coilovers, swift springs, stiffer anti-roll bars, M3 control arms, Vorshlag camber plates, Quaife limited slip differential.
|
||
|
Appreciate
0
|
| 12-03-2020, 03:02 PM | #4 | |||
|
Brigadier General
619
Rep 3,398
Posts |
Quote:
__________________
|
|||
|
Appreciate
0
|
| 12-03-2020, 03:03 PM | #5 | ||||
|
Enthusiast
14
Rep 56
Posts |
Quote:
__________________
RB Twos with high heat wastegates, MMP DPs, RB inlets, RB PCV valve and cap, BMS DCIs, BMS OCC, BMS BOV adapter, ER charge pipe, VRSF 7.5" race intercooler, Fuel-It! stage 2 LPFP, Forge diverters, JB4 w/ backend flash, Öhlins R/T adjustable coilovers, swift springs, stiffer anti-roll bars, M3 control arms, Vorshlag camber plates, Quaife limited slip differential.
|
||||
|
Appreciate
0
|
| 12-04-2020, 12:52 PM | #6 |
|
Private First Class
 122
Rep 149
Posts |
https://www.turnermotorsport.com/p-5...caAqf_EALw_wcB
Are these the coilovers you are selling? I'm asking because I'm not sure if there a different damping version for the e82 since that's what they would be going on. |
|
Appreciate
0
|
| 12-04-2020, 12:54 PM | #7 | |
|
Enthusiast
14
Rep 56
Posts |
Quote:
__________________
RB Twos with high heat wastegates, MMP DPs, RB inlets, RB PCV valve and cap, BMS DCIs, BMS OCC, BMS BOV adapter, ER charge pipe, VRSF 7.5" race intercooler, Fuel-It! stage 2 LPFP, Forge diverters, JB4 w/ backend flash, Öhlins R/T adjustable coilovers, swift springs, stiffer anti-roll bars, M3 control arms, Vorshlag camber plates, Quaife limited slip differential.
|
|
|
Appreciate
0
|
| 12-04-2020, 01:02 PM | #9 | |
|
Enthusiast
14
Rep 56
Posts |
Quote:
__________________
RB Twos with high heat wastegates, MMP DPs, RB inlets, RB PCV valve and cap, BMS DCIs, BMS OCC, BMS BOV adapter, ER charge pipe, VRSF 7.5" race intercooler, Fuel-It! stage 2 LPFP, Forge diverters, JB4 w/ backend flash, Öhlins R/T adjustable coilovers, swift springs, stiffer anti-roll bars, M3 control arms, Vorshlag camber plates, Quaife limited slip differential.
|
|
|
Appreciate
0
|
| 12-04-2020, 01:11 PM | #11 | |||
|
Enthusiast
14
Rep 56
Posts |
Quote:
__________________
RB Twos with high heat wastegates, MMP DPs, RB inlets, RB PCV valve and cap, BMS DCIs, BMS OCC, BMS BOV adapter, ER charge pipe, VRSF 7.5" race intercooler, Fuel-It! stage 2 LPFP, Forge diverters, JB4 w/ backend flash, Öhlins R/T adjustable coilovers, swift springs, stiffer anti-roll bars, M3 control arms, Vorshlag camber plates, Quaife limited slip differential.
|
|||
|
Appreciate
0
|
| 12-04-2020, 06:53 PM | #12 |
|
Private
 15
Rep 67
Posts |
These shocks can be rebuilt, pick your springs and get a Ohlins shop to do the work and you will have a nice set of coil overs. This is the older version, but I think it was same for e82 and e9x platforms. They don't fit the front of an XI. Newer version has stiffer rear springs and appropriate valving for stiffer springs. I'd check with someone like 3d motorsports and get them to rebuild and set you up with springs per your spec.
I just put the older version in this spring, purchased on sale and went with stiffer shorter springs up front and stiffer springs in rear in my e92 than what is offer in the kit. Pretty happy with it. But if there were some decent rebuildable ones for sale might have been a better deal, I have the brand new fronts that go with the kit. I think these are pretty awesome coil overs, but most people go with a 9" rear spring, as to be low you will be at the bottom of the adjuster with the 10". |
|
Appreciate
0
|
| 12-13-2020, 09:55 AM | #13 |
|
The Engineer
27
Rep 331
Posts
Drives: AW 07' 335i
Join Date: Jul 2010
Location: St. Louis MO
|
Can you PM me some pictures and price shipped to 62294
|
|
Appreciate
0
|
| 12-13-2020, 10:20 AM | #14 | ||
|
Major General
4348
Rep 6,196
Posts |
Quote:
|
||
|
Appreciate
0
|
| 12-15-2020, 10:39 PM | #16 | |
|
Enthusiast
14
Rep 56
Posts |
Quote:
__________________
RB Twos with high heat wastegates, MMP DPs, RB inlets, RB PCV valve and cap, BMS DCIs, BMS OCC, BMS BOV adapter, ER charge pipe, VRSF 7.5" race intercooler, Fuel-It! stage 2 LPFP, Forge diverters, JB4 w/ backend flash, Öhlins R/T adjustable coilovers, swift springs, stiffer anti-roll bars, M3 control arms, Vorshlag camber plates, Quaife limited slip differential.
|
|
|
Appreciate
0
|
 |
| Bookmarks |
|
|
