|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Misfire and high afr bank 1?
|
|
12-06-2020, 09:03 PM | #1 |
New Member
9
Rep 24
Posts |
Misfire and high afr bank 1?
Hello, I'm having an issue with my car when it is warm. It starts to stumble a little and I get high afr on bank 1 and misfire in cylinder 3. Car runs fine on cold start then it happens once it is warmed. Plugs and coils have less than 1.5k miles on them and I swapped the cylinder 3 with another and it keeps coming back on cylinder 3. I'm getting codes 29CF, 2C6B, and 2C7B. I don't have a 3rd gear log but I do have one just cruising if that would help.
I also replaced both post cat o2 sensors after I first got the code and problem still exists. I'm staring to think it might be the injector I have index 10 injectors on the car. Mods are rb 1 turbos, 5inch stepped intercooler, catless dps, and dci also running stage 1+ mhd v7.1. Any help would be appreciated. Attached is a log of cruising along. I don't want to push it while it's running like this. Thanks https://datazap.me/u/kennys/log-1607...&data=15-16-23 |
12-06-2020, 09:22 PM | #2 | |
Captain
394
Rep 972
Posts |
Quote:
__________________
Instagram : @Bimmer_bro
|
|
Appreciate
0
|
Bookmarks |
|
|