[MikeM5]

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

As some of you may know, I am parting out the 335 as it doesn't make sense to have 2 modded cars (let alone E90s) at the same time.

The wheels are 19x8.5 front, 19x10 rear w/Toyo T1R (235, 265). I believe these are still the only set of TE-10s on an E9x. There is minor rash on the right rear wheel (no pics yet since the car is just sitting at the shop getting parted) and the tire sidewall on that same right rear is worn from rubbing (since I added 10mm spacers in the front/rear). Other than that, the wheels are in immaculate condition and cleaned inside and out every wash. The tires have maybe 7k on them so there is plenty of tread left.

I bought the wheels & tires for ~$4000 new + $315.00 OEM TPMS.

I am asking $2800 OBO shipped for everything (add 3% if using Paypal please)

For general pics on the car, check out this thread:
http://www.e90post.com/forums/showthread.php?t=176909



Thanks in advance!

[Doc E]

damn it, just when i'm ready to pull the trigger i see a caveat "little rash"....
if you refinish the wheel how would a company match that finish?
can you post a pick of the rash?

[MikeM5]

Originally Posted by PsyD4Me

damn it, just when i'm ready to pull the trigger i see a caveat "little rash"....
if you refinish the wheel how would a company match that finish?
can you post a pick of the rash?

i had previously spoke to wheels america about fixing the rash and they quoted me $135 and ready in 24 hrs - the finish, seemingly, is not an issue to match even though it isn't standard silver. i can look into getting it repaired prior to sale if that would ease your mind about things though! it would just be reflected in the sale price a bit.

the wheels are at the shop (with the 335). if you are most definitely interested in the wheels i will try my best to get there tomorrow or friday and snap a pic for ya and the tread on the tires.

let me know! thanks for your interest

[kiddo]

bump for a great guy and awesome looking wheels

[Doc E]

Originally Posted by Mike@IND

i had previously spoke to wheels america about fixing the rash and they quoted me $135 and ready in 24 hrs - the finish, seemingly, is not an issue to match even though it isn't standard silver. i can look into getting it repaired prior to sale if that would ease your mind about things though! it would just be reflected in the sale price a bit.

the wheels are at the shop (with the 335). if you are most definitely interested in the wheels i will try my best to get there tomorrow or friday and snap a pic for ya and the tread on the tires.

let me know! thanks for your interest

if you can i'd like to see the pic of the rash...
thanx

[MikeM5]

in that case, i will find time to drop by the shop today and snap those pics for you

[MikeM5]

pics available to those who are interested

[KkSc]

damn, i love these wheels, but i have no more $$$...

[MikeM5]

Originally Posted by KkSc

damn, i love these wheels, but i have no more $$$...

man i would be rich if i was paid for how many times i said that while i was modding the 335

thanks for the compliments...they would definitely look SICK on a AW car

[VVA330]

Damm! In the market for a set of wheels! I am not a iforged fan but these are so sexy. anyway to turn those lips to polished? Can I see pic of the rash? wonder how they would look on my Tiag e90? Why did you add a spacer? how do they sit without spacers on the e90? flush or tuck?

[MikeM5]

Originally Posted by VVA330

Damm! In the market for a set of wheels! I am not a iforged fan but these are so sexy. anyway to turn those lips to polished? Can I see pic of the rash? wonder how they would look on my Tiag e90? Why did you add a spacer? how do they sit without spacers on the e90? flush or tuck?

Haha thanks man! These wheels definitely got my jaw dropping when they were released. Plus I love the fact that no other E9x has 'em.

They are 1-piece forged wheels, so unfortunately a polished lip is not possible and to be honest, I think that it would do an injustice to the overall look this wheel achieves as is - especially for your Ti-ag E90. I personally think they'd look great!

I added 10mm spacers all around because I LOVE aggressive fitament and it seems that I-Forged only released one offset for this wheel in the E9x application - the coupe. It was a bit too tucked for my personal tastes, so I spaced it out. If you do choose to use a 10mm spacer in the rear, however, please do roll the fenders. There is wearing on the rear tire sidewalls from rubbing, but nothing that affects the tire/tread itself obviously. If you want to avoid rolling your fenders, could you easily get by with a 5mm spacer.

I don't have pics of the rash on my work computer, but I would be glad to send you some via e-mail when I get home. I took a couple phone camera pics to show what they'd look like at angles where they would look their worst. It's funny though - the car was at a show with Europrojektz with the curb rash and people didn't even notice it since it was facing down. Nonetheless, WheelsAmerica quoted $135 for their 24 hr. service no problem.

Feel free to shoot me a PM with your e-mail and I'll send those pics to ya later today!

[Doc E]

air stems are in the front, unlike the standard iforged placement, right?

[MikeM5]

sale pending

[E92-Lighting]

nice rims , very unique indeed

[VVA330]

Originally Posted by Mike@IND

sale pending

Congrat on the sale. I was hoping it would hold up til the end of December then i will be all over it.

[MikeM5]

^^ actually the pending buyer had to back out, so they are still up for grabs +

[VVA330]

could you post a pix of the rash and worn tire area, also some close up pix under normal lighting would be helpful.

[elwoodwffw]

if you could send me a pic of the rub to.. i am very interested.......

thanks

[MikeM5]

i will get pics as soon as possible for you guys...work has been quite busy of late and the car is at the shop. sit tight!

[MikeM5]

wheels SOLD!