[dj_aivan]

Colleagues can you give some info about rear abs sensors. My car was an e90 320D 2005 and the carriages had gear rings. I put a 330d engine along with diff axles and hubs. The sensors of the 30D are magnetic and the car on the spot reports that it is moving, the dashboard shows 15 km of movement, the counter is on, and it does not remove the key. DSC is lit, the whole car is crashing. when removing the DSC socket, everything is fine. How can I make this DSC work with these magnetic sensors. The donor car has a cruise control with a break function and the twin one has no break. Please someone if he knows to share

[Aus335iguy]

Originally Posted by dj_aivan

Colleagues can you give some info about rear abs sensors. My car was an e90 320D 2005 and the carriages had gear rings. I put a 330d engine along with diff axles and hubs. The sensors of the 30D are magnetic and the car on the spot reports that it is moving, the dashboard shows 15 km of movement, the counter is on, and it does not remove the key. DSC is lit, the whole car is crashing. when removing the DSC socket, everything is fine. How can I make this DSC work with these magnetic sensors. The donor car has a cruise control with a break function and the twin one has no break. Please someone if he knows to share

Take a look at one of the active cruise control retrofit discussions. DIY: E9X ACC Retrofit https://www.e90post.com/forums/showthread.php?t=1530925
There's mention of sensors etc in those. You might not get your answer but those guys will likely know something

Good luck