[J0K3R5]

Having problems with E90 2010 320d.
The wipers will not cancel, ive pulled the codes from the car.
All I done was add a fused wired to fuse 2 for the radio

https://drive.google.com/file/d/180s...ew?usp=sharing

[J0K3R5]

Car runs, lights work, indicators work, dash works.


I did code my DTC, when my abs sensor was playing up, still havent coded it back on.





Now showing low battery and wipers still wont turn off.
Charging battery overnight.

Down to these codes now:

Fault Code: 00a550
Fault Explanation:ID failure 1A0h speed

Fault Code: 00a3b9
Fault Explanation:CAN ID 19E error failure message status DSC

Fault Code: 00e594
Fault Explanation:Telegram steering angle timeout

Fault Code: 0049f3
Fault Explanation:Message (speed WHEEL 0xCE)

Fault Code: 004c23+
Fault Explanation:Message (torque anF DSC, 0xB6)

Fault Code: 004c28
Fault Explanation:Message (speed, 0x1A0)

Fault Code: 004c13
Fault Explanation:Message (STAT DSC, 0x19E)

Fault Code: 004458
Fault Explanation:Message (STEERING anGLE, 0xC4)

Fault Code: 003f62
Fault Explanation:Road speed signal via CAN

Fault Code: 00a0b5
Fault Explanation: :Signal detection speed error / DFAHL cable break A0B5

[J0K3R5]

Got it fixed this morning : FUSE 26 WAS BLOWN + I replaced the Heater Control Panel ( had a spare one, thats the 3rd one Ive killed. Down to my own fault plugging it in when engine was running ). No error codes showing, wipers have stopped going crazy and the DSC errors have gone.