Um... I got my spark plug socket stuck (N53B30)

H325i · 02-19-2021, 12:29 PM

Sooo... odd problem. I went to change the spark plugs & ignition coils on my N53 325i. All fine, got to the first plug, put the magnetic socket in to what felt like the right place, started to turn.

After a few turns I had a look down and...

The socket wasn't aligned properly on the plug. And now it's wedged in at an angle.

Thought ok, lets just try going back in with the plug and taking the socket off. It's just spinning, no movement up/down. I can move it up or down maybe a few mm if I push or pull but other than that the tool literally just spins.

Advice? Anyone ever had the same?

Bit embarrassing.

Phil325i · 02-19-2021, 01:33 PM

You need one of these:

https://www.ebay.co.uk/itm/Laser-Too...53.m1438.l2649

so you can change the plugs like this:

H325i · 02-19-2021, 01:39 PM

Quote:

Originally Posted by Phil325i

You need one of these:

https://www.ebay.co.uk/itm/Laser-Too...53.m1438.l2649

so you can change the plugs like this:

Am I literally just using the wrong size socket? Mine is 5/8"...

:

I'm sure I checked the size beforehand...

Any advice on getting this one out without damaging anything?

H325i · 02-19-2021, 02:20 PM

Quote:

Originally Posted by H325i

Am I literally just using the wrong size socket? Mine is 5/8"...

:

I'm sure I checked the size beforehand...

Any advice on getting this one out without damaging anything?

Got it out. I think I started the change as it was still a bit warm and as the engine cooled it contracted around the socket and wedged it in... or something.

Anyway. I'll get the right size. Silly me.

02-19-2021, 12:29 PM	#1
H325i New Member 0 Rep 14 Posts Drives: E92 325i M Sport Coupe Join Date: Feb 2021 Location: Bristol iTrader: (0)	Um... I got my spark plug socket stuck (N53B30) Sooo... odd problem. I went to change the spark plugs & ignition coils on my N53 325i. All fine, got to the first plug, put the magnetic socket in to what felt like the right place, started to turn. After a few turns I had a look down and... The socket wasn't aligned properly on the plug. And now it's wedged in at an angle. Thought ok, lets just try going back in with the plug and taking the socket off. It's just spinning, no movement up/down. I can move it up or down maybe a few mm if I push or pull but other than that the tool literally just spins. Advice? Anyone ever had the same? Bit embarrassing.
	Appreciate 0 Tweet Quote

02-19-2021, 01:33 PM	#2
Phil325i Brigadier General 639 Rep 3,215 Posts Drives: E92 325i MSport Coupe Join Date: Apr 2012 Location: UK South East iTrader: (1) Garage List 2009 BMW 325i Coupe [6.00]	You need one of these: https://www.ebay.co.uk/itm/Laser-Too...53.m1438.l2649 so you can change the plugs like this: __________________ E92 pre-LCI 325i - Ohlins R&T; H&R spacers; M3 strut brace; Swift thrust sheets; 3 x chassis braces; diff brace; N53 V-brace; 034 subframe inserts; BMS clutch stop; BMS CDV; RE g/box mounts; Delrin shift bushes; Saikoumichi OCC; Cyba scoops; BMW Perf Exhaust; HEL s/steel brake hoses; M3 rear spoiler; Recaro Sportster CSs; M3 white dash LEDs; LED Angels; LED side repeaters; BMW Perf black grille; CSL reps; SSDD carbon diffuser; Monster Wrap black roof/clear front
	Appreciate 0 Quote