3D Printing

detroitm2 · 03-03-2021, 04:39 PM

Picked up an Ender 3 V2 printer a week or so ago and though I'd make a post and see who else is into it.

Made a few things so far, an SD card holder, a couple enclosures I needed for various electrical projects, and a neat cell phone holder.

What have you made?

TiMSport · 03-03-2021, 07:42 PM

Grabbing popcorn awaiting someone to show their firearm made from resin....

gary_william · 03-03-2021, 07:58 PM

3d printer on my wish list for this year. Looking at a creality cr10 v 3. That comes after a porch roof, barbeque, and smoker. Priorities, man.

detroitm2 · 03-03-2021, 10:26 PM

Quote:

Originally Posted by gary_william

3d printer on my wish list for this year. Looking at a creality cr10 v 3. That comes after a porch roof, barbeque, and smoker. Priorities, man.

Unless you plan on printing stuff that big, the ender 3 v2 is better from what I've researched. My 2 cents

Fast.F10 · 03-03-2021, 10:33 PM

I print alittle :evil.grin:

Fast.F10 · 03-03-2021, 10:34 PM

Quote:

Originally Posted by TiMSport

Grabbing popcorn awaiting someone to show their firearm made from resin....

Too long of a print time LOL

TiMSport · 03-03-2021, 11:03 PM

Quote:

Originally Posted by Fast.F10

Too long of a print time LOL

In a hurry? Lol.

fiveohwblow · 03-03-2021, 11:07 PM

Quote:

Originally Posted by TiMSport

Grabbing popcorn awaiting someone to show their firearm made from resin....

https://www.reddit.com/r/guns/commen...k_frame_check/

TiMSport · 03-03-2021, 11:11 PM

Quote:

Originally Posted by fiveohwblow

https://www.reddit.com/r/guns/commen...k_frame_check/

LOL @ the rainbow one

gary_william · 03-03-2021, 11:15 PM

Quote:

Originally Posted by detroitm2

Unless you plan on printing stuff that big, the ender 3 v2 is better from what I've researched. My 2 cents

End goal is to make models of steel buildings to sell to engineers. May need to print floor by floor to avoid a crapton of support trimming.

detroitm2 · 03-04-2021, 12:06 AM

Quote:

Originally Posted by gary_william

Quote:

Originally Posted by detroitm2

Unless you plan on printing stuff that big, the ender 3 v2 is better from what I've researched. My 2 cents

End goal is to make models of steel buildings to sell to engineers. May need to print floor by floor to avoid a crapton of support trimming.

Ah, that would be a legit reason to go big

UncleWede · 03-04-2021, 09:52 AM

I've wanted to get one, to print parts for the 77 Beetle. But with the investment necessary to do that, design parts, test-fit them, etc it's still easier to just buy cheap china products . . .

Fast.F10 · 03-04-2021, 10:04 AM

Quote:

Originally Posted by TiMSport

Grabbing popcorn awaiting someone to show their firearm made from resin....

Not resin...PLA.

TiMSport · 03-04-2021, 10:08 AM

But isn't PLA categorized as a resin?

detroitm2 · 03-04-2021, 10:14 AM

Quote:

Originally Posted by TiMSport

But isn't PLA categorized as a resin?

No, Resin printers are different from typical 3d printers that print PLA, PETG, ABS, TPU, etc.

Resin printing uses a liquid resin vs. a filament.

TiMSport · 03-04-2021, 10:19 AM

Thanks. Shows how much I know about 3D printing. I was focused on PLA itself I guess, and not the method it is employed towards printing. My bad.

As per ASTM, PLA falls into Category 7 I think. TMI though.

vreihen16 · 03-04-2021, 10:34 AM

PLA = don't use the item outdoors. Don't say that I didn't warn you.....

fiveohwblow · 03-04-2021, 10:37 AM

Quote:

Originally Posted by vreihen16

PLA = don't use the item outdoors. Don't say that I didn't warn you.....

Help educate this dummy, why not?

TiMSport · 03-04-2021, 10:40 AM

Quote:

Originally Posted by fiveohwblow

Help educate this dummy, why not?

PLA tends to deform when exposed to heat. That's one issue?
Imagine taking out your newly created firearm and.....

Buug959 · 03-04-2021, 10:51 AM

MG

Fast.F10 · 03-04-2021, 10:51 AM

Material type selection all depends on application/environment. By default/in best practice, yes, PLA type should not be used outdoor. However, the attached was printed at 100% infill and after about 9 months in the Florida sun, no signs of any issues. Scorpion one was on my old truck and other was designed for a customer.

Tommy-G · 03-05-2021, 08:05 AM

Quote:

Originally Posted by detroitm2

and a neat cell phone holder.

That is dope, I guarantee you could sell those...not to me, but many people would buy that. Build a base that fits our cupholders and you'll be golden

03-03-2021, 04:39 PM	#1
detroitm2 Colonel 2451 Rep 2,539 Posts Drives: 2018 M2 Join Date: Aug 2018 Location: Michigan iTrader: (2) Garage List 2018 BMW M2 [10.00]	3D Printing Picked up an Ender 3 V2 printer a week or so ago and though I'd make a post and see who else is into it. Made a few things so far, an SD card holder, a couple enclosures I needed for various electrical projects, and a neat cell phone holder. What have you made? Attached Images __________________ 2018 M2 - Daily Driver/Track Car Motorcity BMWCCA Member Instagram \| YouTube
	Appreciate 2 Fast.F10518.50 MKSixer34121.50 Tweet Quote

03-03-2021, 07:42 PM	#2
TiMSport Banned 12844 Rep 2,983 Posts Drives: '21 M340i xDrive, '17 Audi S3 Join Date: Feb 2021 Location: ATL iTrader: (0)	Grabbing popcorn awaiting someone to show their firearm made from resin....
	Appreciate 8 unluky7675.00 detroitm22450.50 MBM3401049.00 MKSixer34121.50 Buug95922697.50 dtox9355.00 TheWatchGuy3928.50 Dang3r12481.50 Quote

03-03-2021, 07:58 PM	#3
gary_william Private First Class 326 Rep 169 Posts Drives: 2013 128i Join Date: May 2017 Location: Vancouver, WA iTrader: (0)	3d printer on my wish list for this year. Looking at a creality cr10 v 3. That comes after a porch roof, barbeque, and smoker. Priorities, man.
	Appreciate 0 Quote

03-03-2021, 10:33 PM	#5
Fast.F10 Extruding Elements 519 Rep 535 Posts Drives: 2016 BMW M5 Comp Join Date: Feb 2020 Location: Florida iTrader: (1) Garage List 2016 BMW M5 F10 [0.00]	I print alittle :evil.grin: __________________ 2022 Yukon XL AT4 2016 BMW M5 2015 Ford F250 Super Duty 2006 BMW M5
	Appreciate 0 Quote

03-04-2021, 09:52 AM	#12
UncleWede Long Time Admirer, First Time Owner 18404 Rep 9,420 Posts Drives: G01 X3 M40i Dark Graphite Join Date: Jun 2005 Location: Oxnard, CA iTrader: (0)	I've wanted to get one, to print parts for the 77 Beetle. But with the investment necessary to do that, design parts, test-fit them, etc it's still easier to just buy cheap china products . . .
	Appreciate 1 vreihen1620213.50 Quote

03-04-2021, 10:08 AM	#14
TiMSport Banned 12844 Rep 2,983 Posts Drives: '21 M340i xDrive, '17 Audi S3 Join Date: Feb 2021 Location: ATL iTrader: (0)	But isn't PLA categorized as a resin?
	Appreciate 0 Quote

03-04-2021, 10:19 AM	#16
TiMSport Banned 12844 Rep 2,983 Posts Drives: '21 M340i xDrive, '17 Audi S3 Join Date: Feb 2021 Location: ATL iTrader: (0)	Thanks. Shows how much I know about 3D printing. I was focused on PLA itself I guess, and not the method it is employed towards printing. My bad. As per ASTM, PLA falls into Category 7 I think. TMI though.
	Appreciate 0 Quote

03-04-2021, 10:34 AM	#17
vreihen16 Recovering Perfectionist 20214 Rep 1,001 Posts Drives: BMW-less :( Join Date: Jun 2019 Location: Orange County, NY iTrader: (0) Garage List 2014 Mighty Freight ... [0.00] 2000 Audi TT Quattro [0.00] 1967 Formula Vee [0.00]	PLA = don't use the item outdoors. Don't say that I didn't warn you..... __________________ Currently BMW-less.
	Appreciate 0 Quote

03-04-2021, 10:51 AM	#20
Buug959 Captain 22698 Rep 891 Posts Drives: 335xi E90, GMC Sierra, VW Golf Join Date: Jun 2020 Location: Nova Scotia iTrader: (0)	MG Attached Images __________________ Wha' da ya mean? No brakes never stopped anyone before!
	Appreciate 2 Fast.F10518.50 TiMSport12843.50 Quote