[Mart335d]

Hi this is My first post, hopefully to obtain some info to diagnose my loss of power in my e92 335d 2007 uk model

During checking things, i found dpf pressure sensor reading with live data reads 8000-9000
Mbar with ign on, then at idle goes up to anywhere between 9000-2mbar.
So I checked dpf pressure sensor signal voltage and found 2.62 volts with ign on, by back probing signal wire of sensor
Does anyone know if this sounds right, I was expecting to see a voltage of approx 0.5v with ign on.



Thanks