Shifter options

Mustafa.e92 · 07-23-2021, 01:25 AM

I have about an inch of left to right play when in gear and a death wobble in third. What bushings would minimize play?. I'm also looking at short shifter options to get more precise feeling shifts. I like the feel of an rtd and the clunk but I hate how it looks sticking up a foot in the air. does anyone have a ssk and how do you like it. what setup do you guys have for your shifter?

Tyc0 · 07-23-2021, 01:43 AM

I installed the turner short shift kit. Little cheaper than the rest of the options and much more adjustable. I can adjust throws up to something like 60% reduction and as little as 15%, it also has adjustable height. This REALLY tightened up my shifts, it has a good clunk and is pretty much impossible to miss a gear. Can't recommend more.

Mustafa.e92 · 07-23-2021, 12:35 PM

Quote:

Originally Posted by Tyc0

I installed the turner short shift kit. Little cheaper than the rest of the options and much more adjustable. I can adjust throws up to something like 60% reduction and as little as 15%, it also has adjustable height. This REALLY tightened up my shifts, it has a good clunk and is pretty much impossible to miss a gear. Can't recommend more.

The kit dosent seem to come with the bushings did you replace them? Also what's the lowest height setting? Can I run a zhp knob with it

Tyc0 · 07-23-2021, 01:57 PM

The only thing that won't be replaced by this kit the the rear brace witch has a rubber bushing but doesn't move. Yes it will probably go even lower than stock. Yes you can use zhp knob if it is the normal style bmw "slit" that they use.

Mustafa.e92 · 07-23-2021, 05:02 PM

Can you send the link for the one you got, theirs a few options

Tyc0 · 07-24-2021, 02:44 PM

https://www.turnermotorsport.com/p-5...-kit/?pdk=AQcH

By the way the longer shift arm is not included unless you select it.

Mustafa.e92 · 07-27-2021, 12:12 AM

Quote:

Originally Posted by Tyc0

https://www.turnermotorsport.com/p-5...-kit/?pdk=AQcH

By the way the longer shift arm is not included unless you select it.

Ordered it thanks for the help

Tyc0 · 07-27-2021, 12:19 AM

No problem, it's a bit of a difficult install you have to remove the front of the driveshaft and let it hang and even then there isn't much room. If you remove the heat shield as well it would be a lot easier but that would mean lowering the exhaust too. Good luck!

kkabox · 11-22-2021, 09:46 AM

Quote:

Originally Posted by Mustafa.e92

Ordered it thanks for the help

hi, do u install already this new shifter? do u still have RTD shifter? I want to order it, but not sure if it fit in my car, i have a diesel one. If u still have it and out of a car, can u please tell me some dimensions? It can help me a lot.

Mustafa.e92 · 11-22-2021, 09:49 AM

Quote:

Originally Posted by kkabox

Quote:

Originally Posted by Mustafa.e92

Ordered it thanks for the help

hi, do u install already this new shifter? do u still have RTD shifter? I want to order it, but not sure if it fit in my car, i have a diesel one. If u still have it and out of a car, can u please tell me some dimensions? It can help me a lot.

Still waiting for it lol they were back ordered and it was supposed to ship like 2 weeks ago. Hasn't yet

kkabox · 11-22-2021, 09:54 AM

damn, okay, if i send u some drawings, will able to do some measures please?

Mustafa.e92 · 11-22-2021, 09:56 AM

Quote:

Originally Posted by kkabox

damn, okay, if i send u some drawings, will able to do some measures please?

Yeah

07-23-2021, 01:25 AM	#1
Mustafa.e92 Lieutenant 215 Rep 499 Posts Drives: 2009 bmw 335i Join Date: Feb 2020 Location: Canada iTrader: (0)	Shifter options I have about an inch of left to right play when in gear and a death wobble in third. What bushings would minimize play?. I'm also looking at short shifter options to get more precise feeling shifts. I like the feel of an rtd and the clunk but I hate how it looks sticking up a foot in the air. does anyone have a ssk and how do you like it. what setup do you guys have for your shifter?
	Appreciate 0 Tweet Quote

07-23-2021, 01:43 AM	#2
Tyc0 Lieutenant 151 Rep 517 Posts Drives: BMW e92 335i Join Date: Sep 2019 Location: Oregon iTrader: (0)	I installed the turner short shift kit. Little cheaper than the rest of the options and much more adjustable. I can adjust throws up to something like 60% reduction and as little as 15%, it also has adjustable height. This REALLY tightened up my shifts, it has a good clunk and is pretty much impossible to miss a gear. Can't recommend more.
	Appreciate 0 Quote

07-23-2021, 01:57 PM	#4
Tyc0 Lieutenant 151 Rep 517 Posts Drives: BMW e92 335i Join Date: Sep 2019 Location: Oregon iTrader: (0)	The only thing that won't be replaced by this kit the the rear brace witch has a rubber bushing but doesn't move. Yes it will probably go even lower than stock. Yes you can use zhp knob if it is the normal style bmw "slit" that they use.
	Appreciate 0 Quote

07-23-2021, 05:02 PM	#5
Mustafa.e92 Lieutenant 215 Rep 499 Posts Drives: 2009 bmw 335i Join Date: Feb 2020 Location: Canada iTrader: (0)	Can you send the link for the one you got, theirs a few options
	Appreciate 0 Quote

07-24-2021, 02:44 PM	#6
Tyc0 Lieutenant 151 Rep 517 Posts Drives: BMW e92 335i Join Date: Sep 2019 Location: Oregon iTrader: (0)	https://www.turnermotorsport.com/p-5...-kit/?pdk=AQcH By the way the longer shift arm is not included unless you select it.
	Appreciate 1 Jaronbwall298.00 Quote

07-27-2021, 12:19 AM	#8
Tyc0 Lieutenant 151 Rep 517 Posts Drives: BMW e92 335i Join Date: Sep 2019 Location: Oregon iTrader: (0)	No problem, it's a bit of a difficult install you have to remove the front of the driveshaft and let it hang and even then there isn't much room. If you remove the heat shield as well it would be a lot easier but that would mean lowering the exhaust too. Good luck!
	Appreciate 0 Quote

11-22-2021, 09:54 AM	#11
kkabox Registered 0 Rep 4 Posts Drives: BMW 320d E91 2008 Join Date: Nov 2021 Location: Prague iTrader: (0)	damn, okay, if i send u some drawings, will able to do some measures please?
	Appreciate 0 Quote