|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
FRM Windows Coding Help
|
|
07-25-2021, 06:28 PM | #1 |
Captain
288
Rep 693
Posts |
FRM Windows Coding Help
Hey everyone. I have an anti-trap error that is not going away and as a result my front passenger window only moves inch by inch. The motor and regulator are working perfectly fineand I have tried many window regulator reinitislization method even with INPA and ISTA.
After noticing that my high beam wouldn't stay on when the toggle lever was used I am positive that there is a problem with the FRM that I just had replaced last October under the extended warranty. My question is if there is a way or possibility of recoding on my current FRM3 the front passenger window control to see if it can fix anything. I am not too familiar with Tool32 but I suppose it would be there? Anyones if anyone can guide and help me it would be appreciated since the issue is getting on my last nerves hahaha
__________________
TOTALED | 2011 E90 335i xDrive - BMS Cold Air Intake - ETS Charge Pipe - ETS 7" FMIC - MHD Stage 2+ - GFB DV+ - PE Mod - VRSF Catless Downpipe - xDelete - xHP Stage 3
2015 E84 X1 35i M-Sport |
07-26-2021, 03:20 PM | #2 | |
Private
22
Rep 65
Posts |
Quote:
I don't know if this will work for you but that's what did it for me. Goodluck |
|
Appreciate
0
|
07-28-2021, 05:20 PM | #3 | |
Captain
288
Rep 693
Posts |
Quote:
__________________
TOTALED | 2011 E90 335i xDrive - BMS Cold Air Intake - ETS Charge Pipe - ETS 7" FMIC - MHD Stage 2+ - GFB DV+ - PE Mod - VRSF Catless Downpipe - xDelete - xHP Stage 3
2015 E84 X1 35i M-Sport |
|
Appreciate
0
|
08-04-2021, 03:49 PM | #4 |
Private
9
Rep 73
Posts |
Maybe you can try to update the FRM with imported SP Daten of E90 in Winkfp.
Then FA Write from CAS to FRM and default code the FRM Module. |
Appreciate
1
TheGoodTheBadTheUgly287.50 |
08-06-2021, 12:55 AM | #5 |
Captain
288
Rep 693
Posts |
Unfortunately, I suck a LOT with coding and I don't know exactly how to do all of this. I have thr softwares and I have a general very general idea about what you are saying, but if you couke walk me through it I would appreciate it do much.
__________________
TOTALED | 2011 E90 335i xDrive - BMS Cold Air Intake - ETS Charge Pipe - ETS 7" FMIC - MHD Stage 2+ - GFB DV+ - PE Mod - VRSF Catless Downpipe - xDelete - xHP Stage 3
2015 E84 X1 35i M-Sport |
Appreciate
0
|
08-14-2021, 01:28 PM | #6 |
Captain
288
Rep 693
Posts |
Anyone could guide me on how to code back the FRM to the default settings just to see if it will erase the error?
__________________
TOTALED | 2011 E90 335i xDrive - BMS Cold Air Intake - ETS Charge Pipe - ETS 7" FMIC - MHD Stage 2+ - GFB DV+ - PE Mod - VRSF Catless Downpipe - xDelete - xHP Stage 3
2015 E84 X1 35i M-Sport |
Appreciate
0
|
08-18-2021, 09:51 PM | #7 |
Private
22
Rep 65
Posts |
I believe you'd have to flash the frm to get it back to factory, I saw another forum from a while ago saying dealers were aware of this issue and it was fixed on ista, but if whatever happened to the window isn't fixed I think the problem will just return again. From my last comment I think the fix is pretty easy it's just you don't know what the fix is lol
|
Appreciate
0
|
08-18-2021, 11:27 PM | #8 | |
Captain
288
Rep 693
Posts |
Quote:
But you're right, it can't be something very complicated, it's just not obvious.
__________________
TOTALED | 2011 E90 335i xDrive - BMS Cold Air Intake - ETS Charge Pipe - ETS 7" FMIC - MHD Stage 2+ - GFB DV+ - PE Mod - VRSF Catless Downpipe - xDelete - xHP Stage 3
2015 E84 X1 35i M-Sport |
|
Appreciate
0
|
08-30-2021, 10:11 AM | #9 |
Private
22
Rep 81
Posts |
Holding the windows buttons up for some seconds will fix them but from what I understand the FRM is probably faulty I once managed to destroy one with low battery voltage and coding, only hazzard lights and low beams work. The light switch doesnt work either nor the blinkers
|
Appreciate
0
|
11-27-2021, 04:57 PM | #11 |
Private
9
Rep 73
Posts |
I fixed my windows with updating the module.
First I imported the V68 E89 Daten with BMW Coding Tool. After that, I backed up my FRM Coding Data by using NCS Expert: 1. Open NCS with Admin and Expert Profile 2.0 2. F1 F3 F1, hit Back and you see your modules. 3. Select: Choose ECU (I think F4) 4. Change Job - Codierdaten_lesen 5. Execute Job 6. Go to you NCSExpert - Work Directory and copy the FSW_PSW.TRC File Then I updated it with WINKFP to the latest ZB Number and wrote the FA from CAS to NFRM and default coded it. Cant remember the steps and buttons but you can do it ! |
Appreciate
0
|
11-27-2021, 06:13 PM | #12 | |
Captain
288
Rep 693
Posts |
Quote:
I was lucky enough to still be under extended warranty and replaced it once again... I will defently keep that in mind for the windows if it acts up again. Thanks so much to everyone!
__________________
TOTALED | 2011 E90 335i xDrive - BMS Cold Air Intake - ETS Charge Pipe - ETS 7" FMIC - MHD Stage 2+ - GFB DV+ - PE Mod - VRSF Catless Downpipe - xDelete - xHP Stage 3
2015 E84 X1 35i M-Sport |
|
Appreciate
0
|
Bookmarks |
|
|