Firmware Update Issues while using WINFPK 5.3.1

Minton444 · 10-16-2021, 04:14 PM

I'm a disabled vet that was given this car. The CCC unit went bad so I replaced it because I couldn't afford to have it done by anyone else. Since I was doing the work myself I figured I would do a firmware update on all of my 2006 525XI e60 modules except for the CAS and now I'm having issues. I used K+DCAN cable & WINFPK 5.3.1. with the sp-daten ver 67.1. Everything showed that it completed "OK". Now I have all of these error codes and all kinds of issues. I need help to get back on the road. If I get this fixed I'm never touching this car ever again!!!!

SIM/SGM
93AD 60

SZL
9501 60
94C0 20
94AC 60

STVL/TEFA
963F 20
962C 60

STVR/TEBF
96FD 20
96BF 20
96AC 60

SFZ
9ABF 20
9AAC 60

DME/DDE
CD99 84
CDA8 84
CD94 94
2DC3 04
CDB0 04
CDA9 14
CD9F 14
CDAB 14
CDAA 14
CDAE 14

EGS
CF1B 24
CF1A 24
CF19 24
CF1E 24
CF21 34

VGSG
54C6 71
55C3 38
55D0 28

DSC
D378 A4
D36A A4
D356 A4
D355 A4
5DDF A0
5EBA E0

CAS
A0B1 28

KOMBI
A3B3 20
A3B9 20
A3AC 20
A556 20

SBSL
984C 70
9857 70
986D 70
9878 70
9891 20
9895 60
983F 20
982C 60

SBSR
98ED 70
98F8 70
9915 60
98BF 20
98AC 60

There has been many lessons learned here. One being, I did a firmware update on all of these at one time and didn't cycle the car every time I updated the firmware. I also had a battery charger attached and NOT a voltage regulator. Lastly and most importantly, I should have had an indie shop do the work but I'm broke and now I don't have a car! Will someone please help me get out of this mess.

sdbmwcoding · 10-16-2021, 08:46 PM

Factory code each module you updated in Winkfp with Ncs expert

Minton444 · 10-16-2021, 08:48 PM

Quote:

Originally Posted by sd*********

Factory code each module you updated in Winkfp with Ncs expert

Is there a website that could walk me through it? Thank you so much

Minton444 · 10-17-2021, 11:10 AM

I want to extend a big thanks to Mizta insane for taking the time to help me make the corrections I needed to get my car back on the road.

To all of those DIYers, take your time and understand and respect the programming/coding process because you might find yourself in my same situation. The proper cables, software and knowledge is key!

To those who wanted to know how we got it fixed, it was as simple as coding everything I updated back to the car with NCSExpert!

Thanks again Mizta insane!

mizta insane · 10-17-2021, 11:12 AM

Happy to help.

Aside from coding back to default. We also needed to reset a few module with tool32.

Kraal · 10-17-2021, 03:19 PM

Quote:

Originally Posted by Minton444

I want to extend a big thanks to Mizta insane for taking the time to help me make the corrections I needed to get my car back on the road.

To all of those DIYers, take your time and understand and respect the programming/coding process because you might find yourself in my same situation. The proper cables, software and knowledge is key!

To those who wanted to know how we got it fixed, it was as simple as coding everything I updated back to the car with NCSExpert!

Thanks again Mizta insane!

I would like to do it myself, but I am afraid to mess everything!!!
Good it worked.

mizta insane · 10-17-2021, 03:36 PM

Quote:

Originally Posted by Kraal

I would like to do it myself, but I am afraid to mess everything!!!
Good it worked.

shoot me a PM, happy to help

10-16-2021, 04:14 PM	#1
Minton444 Private 10 Rep 81 Posts Drives: 2006 525xi e60 Join Date: Aug 2021 Location: Columbus, Ohio iTrader: (0)	Firmware Update Issues while using WINFPK 5.3.1 I'm a disabled vet that was given this car. The CCC unit went bad so I replaced it because I couldn't afford to have it done by anyone else. Since I was doing the work myself I figured I would do a firmware update on all of my 2006 525XI e60 modules except for the CAS and now I'm having issues. I used K+DCAN cable & WINFPK 5.3.1. with the sp-daten ver 67.1. Everything showed that it completed "OK". Now I have all of these error codes and all kinds of issues. I need help to get back on the road. If I get this fixed I'm never touching this car ever again!!!! SIM/SGM 93AD 60 SZL 9501 60 94C0 20 94AC 60 STVL/TEFA 963F 20 962C 60 STVR/TEBF 96FD 20 96BF 20 96AC 60 SFZ 9ABF 20 9AAC 60 DME/DDE CD99 84 CDA8 84 CD94 94 2DC3 04 CDB0 04 CDA9 14 CD9F 14 CDAB 14 CDAA 14 CDAE 14 EGS CF1B 24 CF1A 24 CF19 24 CF1E 24 CF21 34 VGSG 54C6 71 55C3 38 55D0 28 DSC D378 A4 D36A A4 D356 A4 D355 A4 5DDF A0 5EBA E0 CAS A0B1 28 KOMBI A3B3 20 A3B9 20 A3AC 20 A556 20 SBSL 984C 70 9857 70 986D 70 9878 70 9891 20 9895 60 983F 20 982C 60 SBSR 98ED 70 98F8 70 9915 60 98BF 20 98AC 60 There has been many lessons learned here. One being, I did a firmware update on all of these at one time and didn't cycle the car every time I updated the firmware. I also had a battery charger attached and NOT a voltage regulator. Lastly and most importantly, I should have had an indie shop do the work but I'm broke and now I don't have a car! Will someone please help me get out of this mess.
	Appreciate 0 Tweet Quote

10-16-2021, 08:46 PM	#2
sdbmwcoding Captain 196 Rep 804 Posts Drives: BMW M3 Join Date: May 2019 Location: San Diego iTrader: (0)	Factory code each module you updated in Winkfp with Ncs expert
	Appreciate 0 Quote

10-17-2021, 11:10 AM	#4
Minton444 Private 10 Rep 81 Posts Drives: 2006 525xi e60 Join Date: Aug 2021 Location: Columbus, Ohio iTrader: (0)	Big Thanks to Mizta insane! I want to extend a big thanks to Mizta insane for taking the time to help me make the corrections I needed to get my car back on the road. To all of those DIYers, take your time and understand and respect the programming/coding process because you might find yourself in my same situation. The proper cables, software and knowledge is key! To those who wanted to know how we got it fixed, it was as simple as coding everything I updated back to the car with NCSExpert! Thanks again Mizta insane!
	Appreciate 0 Quote

10-17-2021, 11:12 AM	#5
mizta insane Private First Class 34 Rep 124 Posts Drives: 2007 335i Join Date: Jun 2013 Location: NY iTrader: (1)	Happy to help. Aside from coding back to default. We also needed to reset a few module with tool32.
	Appreciate 0 Quote