Procede v3.1 Drag Results

kaji335i · 11-25-2008, 02:38 PM

I headed out to Sacramento Raceway again this past Sunday with a few friends. Here are the specs on my car and Procede Settings:

2007 335i Coupe 6AT
Procede V3.1 (running pre-beta map 91 octane @ 90% UT)
100 octane
Vishnu DCI
Vishnu Catback Exhaust
AR Design Catless Downpipes
Code3 IC
Quaife LSD
Forge DV
Michelin PS2 on 19" wheels

My best run was as follows:

E.T. - 12.636
MPH - 115.381

I decided to play it on the conservative side and run the 91 octane map instead of running the beta race gas map. I am happy that I did as I did not exceed 16 psi on my boost gauge, so I am pretty sure I am at ~15.5 psi at the intake.

Traction was horrible, and I basically had to granny launch the car for all my runs, brake boosting anything over 1100 rpm induced far too much wheel spin. For my next trip to the track I will bring some drag radials and run the race gas map capped at 16.5 psi. Hopefully that will get me into the low 12s.

I will post a video once I have time to edit it.

RiXst3r · 11-25-2008, 02:48 PM

Congrats! Nice runs.

Sal@AUTOcouture · 11-25-2008, 02:50 PM

whats the point of running 100octane then?

OpenFlash · 11-25-2008, 02:55 PM

Quote:

Originally Posted by AutoCouture

whats the point of running 100octane then?

The beta map he was running has map2 (race gas) disabled. He didn't know that until he got to the track.

Ryan-- Let's get the drag tires on that sucker and go for 11s. With those traps, it will do it for sure. Maybe without even uploading a race gas map.

Shiv

sflgator · 11-25-2008, 03:12 PM

Excellent ET and Trap!!!!

kaji335i · 11-25-2008, 03:37 PM

Quote:

Originally Posted by AutoCouture

whats the point of running 100octane then?

As shiv said I did not know that map2 was disabled until I got to the track, I could of uploaded the beta race map, but decided to just run the pre-beta map on map1.

Driver72 · 11-25-2008, 03:54 PM

Nice trap speeds man.
With traction you'd be well into low 12's.

scalbert · 11-25-2008, 04:05 PM

It is nice to see all these trap speeds climbing...

OpenFlash · 11-25-2008, 04:19 PM

Guess how much power this car just put down on the dyno?

Shiv

scalbert · 11-25-2008, 04:20 PM

Quote:

Originally Posted by shiv@vishnu

Guess how much power this car just put down on the dyno?

Shiv

390 +/- 10

OpenFlash · 11-25-2008, 04:21 PM

hmmm.. Try again

E90ice · 11-25-2008, 04:21 PM

Quote:

Originally Posted by shiv@vishnu

Guess how much power this car just put down on the dyno?

Shiv

212whp

scalbert · 11-25-2008, 04:23 PM

Quote:

Originally Posted by shiv@vishnu

hmmm.. Try again

1 Million HP

Minus about 999,580

OpenFlash · 11-25-2008, 04:27 PM

Well..what kind of power do you usually see cars that run over 115mph put down on the dyno. Afterall, isn't the dyno the best indicator of how fast a car runs?

Shiv

ArmyBimmerDude · 11-25-2008, 04:28 PM

340-350rwhp/340-350tq

kenneth · 11-25-2008, 04:35 PM

Quote:

Originally Posted by shiv@vishnu

Well..what kind of power do you usually see cars that run over 115mph put down on the dyno. Afterall, isn't the dyno the best indicator of how fast a car runs?

Shiv

I say 425 whp!

Spill it already you teaser you .....

M3to335 · 11-25-2008, 04:38 PM

Shiv, you sure you dont need a beta tester who's hitting up a real track and not a drag strip

Ive done everything from 1.45 through the V2 betas and a few V3 betas at this track in similar conditions.... it would be interesting to see.

Driver72 · 11-25-2008, 05:05 PM

With these mods:

2007 335i Coupe 6AT
Procede V3.1 (running pre-beta map 91 octane @ 90% UT)
100 octane
Vishnu DCI
Vishnu Catback Exhaust
AR Design Catless Downpipes
Code3 IC
Quaife LSD
Forge DV

I'd say

382-385 rwhp
380-383 rwtq

hotrod182 · 11-25-2008, 05:08 PM

Does anyone know how much power the DCI, Code3, DPs, and Exhaust are worth? How do they affect your traps?

Driver72 · 11-25-2008, 05:30 PM

Quote:

Originally Posted by hotrod182

Does anyone know how much power the DCI, Code3, DPs, and Exhaust are worth? How do they affect your traps?

I would have loved to know for sure and was hoping to find that out at the dyno day.
Hence one of the reasons I asked everyone to show up with their everyday 91 Octane in their tanks (except Down4it who I knew ran 100 Octane full time).
However, pretty much everyone with these mods ended up putting in race gas so it's hard to tell.

But to be honest, my guess all 4 of those mods are worth about 30-35 rwhp on the dyno.
And probably quite a bit more on the road where the FMIC will help keep heat soak from occuring, where the, DCI, catless DP's and exhaust will help the car breath in and out better and get onto boost sooner and longer.

Probably more effectively worth 40-45 rwhp on the road.
Just a guess though.

Clem · 11-25-2008, 05:45 PM

Great trap!

But, WTF is going on with the track prep at these West Coast tracks? You guys are getting screwed!!

Over here on the East Coast they have this sticky stuff that some flunky with a low tooth count sprays on the track. This guy is clearly not a rocket scientist. How hard can it be. Spray some fucking VHT already! You guys have great weather, hot chicks, beautiful sunsets and In-N-Out Burger. You deserve better.

Sorry, I just had to get that out.

sflgator · 11-25-2008, 06:36 PM

Quote:

Originally Posted by shiv@vishnu

Well..what kind of power do you usually see cars that run over 115mph put down on the dyno. Afterall, isn't the dyno the best indicator of how fast a car runs?

Shiv

An E60 M5 (in P500) with 500BHP typically traps ~115mph.

11-25-2008, 02:38 PM	#1
kaji335i Lieutenant Colonel 37 Rep 1,896 Posts Drives: e92 335i Join Date: Nov 2006 Location: that place iTrader: (0)	Procede v3.1 Drag Results I headed out to Sacramento Raceway again this past Sunday with a few friends. Here are the specs on my car and Procede Settings: 2007 335i Coupe 6AT Procede V3.1 (running pre-beta map 91 octane @ 90% UT) 100 octane Vishnu DCI Vishnu Catback Exhaust AR Design Catless Downpipes Code3 IC Quaife LSD Forge DV Michelin PS2 on 19" wheels My best run was as follows: E.T. - 12.636 MPH - 115.381 I decided to play it on the conservative side and run the 91 octane map instead of running the beta race gas map. I am happy that I did as I did not exceed 16 psi on my boost gauge, so I am pretty sure I am at ~15.5 psi at the intake. Traction was horrible, and I basically had to granny launch the car for all my runs, brake boosting anything over 1100 rpm induced far too much wheel spin. For my next trip to the track I will bring some drag radials and run the race gas map capped at 16.5 psi. Hopefully that will get me into the low 12s. I will post a video once I have time to edit it. Attached Images
	Appreciate 0 Tweet Quote

11-25-2008, 02:48 PM	#2
RiXst3r 287 Rep 6,510 Posts Drives: M235i Join Date: Sep 2006 Location: Ohio iTrader: (14)	Congrats! Nice runs.
	Appreciate 0 Quote

11-25-2008, 02:50 PM	#3
Sal@AUTOcouture 744 Rep 10,106 Posts Drives: E93 M3, E36 M3 Join Date: Feb 2007 Location: Sofla iTrader: (30)	whats the point of running 100octane then?
	Appreciate 0 Quote

11-25-2008, 03:12 PM	#5
sflgator Major General 166 Rep 5,389 Posts Drives: '09 MB C63 AMG & '08 MB GL450 Join Date: Oct 2006 Location: U.S. iTrader: (1)	Excellent ET and Trap!!!! __________________ \|2009 RENNtech MB C63 AMG \| Black/Black Leather/Black Maple \| Premium II \| MultiMedia \| iPod \| \| TeleAid \| Charcoal Filter Delete \| BMC High-Flow Air Filters \| High-Flow Secondary Cats \| Clear Side Markers \|
	Appreciate 0 Quote

11-25-2008, 03:54 PM	#7
Driver72 Brigadier General 351 Rep 4,484 Posts Drives: 335i - to new owners now. Join Date: Dec 2006 Location: California iTrader: (0)	Nice trap speeds man. With traction you'd be well into low 12's.
	Appreciate 0 Quote

11-25-2008, 04:05 PM	#8
scalbert Major General 158 Rep 5,776 Posts Drives: '13 S4, '15 Q7 Join Date: Feb 2007 Location: Woodstock, GA iTrader: (8)	It is nice to see all these trap speeds climbing...
	Appreciate 0 Quote

11-25-2008, 04:19 PM	#9
OpenFlash 1806 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	Guess how much power this car just put down on the dyno? Shiv
	Appreciate 0 Quote

11-25-2008, 04:21 PM	#11
OpenFlash 1806 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	hmmm.. Try again
	Appreciate 0 Quote

11-25-2008, 04:27 PM	#14
OpenFlash 1806 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	Well..what kind of power do you usually see cars that run over 115mph put down on the dyno. Afterall, isn't the dyno the best indicator of how fast a car runs? Shiv
	Appreciate 0 Quote

11-25-2008, 04:28 PM	#15
ArmyBimmerDude Major General 156 Rep 5,497 Posts Drives: Lola Join Date: Nov 2006 Location: Georgia iTrader: (3) Garage List 02/2007 E92 335i [0.00]	340-350rwhp/340-350tq __________________ 2007 E92 Montego Blue 335i
	Appreciate 0 Quote

11-25-2008, 04:38 PM	#17
M3to335 Whats that smell? 149 Rep 1,790 Posts Drives: Bimmers, duh Join Date: Nov 2006 Location: NC iTrader: (6)	Shiv, you sure you dont need a beta tester who's hitting up a real track and not a drag strip Ive done everything from 1.45 through the V2 betas and a few V3 betas at this track in similar conditions.... it would be interesting to see.
	Appreciate 0 Quote

11-25-2008, 05:05 PM	#18
Driver72 Brigadier General 351 Rep 4,484 Posts Drives: 335i - to new owners now. Join Date: Dec 2006 Location: California iTrader: (0)	With these mods: 2007 335i Coupe 6AT Procede V3.1 (running pre-beta map 91 octane @ 90% UT) 100 octane Vishnu DCI Vishnu Catback Exhaust AR Design Catless Downpipes Code3 IC Quaife LSD Forge DV I'd say 382-385 rwhp 380-383 rwtq
	Appreciate 0 Quote

11-25-2008, 05:08 PM	#19
hotrod182 . 878 Rep 3,994 Posts Drives: 2023 i4 M50 Join Date: Dec 2006 Location: California iTrader: (0)	Does anyone know how much power the DCI, Code3, DPs, and Exhaust are worth? How do they affect your traps? __________________ 2011 Alpine 335d M-Sport 12.34 @ 110.48mph 2019 i3s Terra, 2008 Black 335i Sedan. 11.11@ 129.47 mph 2008 Monaco Blue JB3 2.0 335i Coupe. 11.33 @ 132.77 mph, 60-130mph: 6.95 seconds 2023 i4 M50 11.48 @ 121.56mph, 3.43 0-60 (dragy)
	Appreciate 0 Quote

11-25-2008, 05:45 PM	#21
Clem Major 152 Rep 1,254 Posts Drives: 2010 E90 M3 AW/FR ESS VT2 Join Date: Nov 2006 Location: MD iTrader: (4)	Great trap! But, WTF is going on with the track prep at these West Coast tracks? You guys are getting screwed!! Over here on the East Coast they have this sticky stuff that some flunky with a low tooth count sprays on the track. This guy is clearly not a rocket scientist. How hard can it be. Spray some fucking VHT already! You guys have great weather, hot chicks, beautiful sunsets and In-N-Out Burger. You deserve better. Sorry, I just had to get that out.
	Appreciate 0 Quote