Just flashed MHD Stage 2+ for the first time, how are my logs?

Milkbar · 09-01-2022, 11:05 PM

Hey all, just flashed MHD Stage 2+ over my Dinan Stage 2. Definitely a noticeable improvement across the board.

My current mods:
VRSF 5 inch FMIC
VRSF Race Exhaust
Stock DPs (Getting VRSF High Flow Cats put on next week)

I know I probably should have waited until the HFCs were put on but I'm an impatient person.

Anyways here are my logs. I did a couple very short pulls but I'm not really able to understand the logs. Seems like I might have a slight boost leak somewhere since I'm not hitting boost target? Or could that be because of my stock cats atm? Thanks for your time yall.

Here are three logs from my pulls:
https://datazap.me/u/seizethegap/fir...og=0&data=3-12

Spooly · 09-02-2022, 01:11 AM

You'll need to redo the log correctly for anyone to really help you.
You'll want to do a 4th gear pull from like 3000 rpm to redline, full throttle, dsc off.
The log you posted ends way too early to be useful.

Milkbar · 09-02-2022, 01:12 AM

Quote:

Originally Posted by Spooly

You'll need to redo the log correctly for anyone to really help you.
You'll need to do a 4th gear pull from like 3000 rpm to redline, full throttle, dsc off.
The log you posted ends way too early to be useful.

Ah I see, ok I'll repost here once I do that.

Spooly · 09-02-2022, 01:15 AM

Also as you seem to already know it's not recommended to run mhd stage 2+ with stock cats, so maybe wait till till you have the HFC to do a log.

whyzee125 · 09-02-2022, 07:48 PM

I wouldn't push the car until you get your downpipe, then try again with a log to redline. There's just no sense pushing your hardware that hard when new stuff is on the way as it can be very pricy and there's a reason you need aftermarket downpipe.

I do my logs in 3rd, but I go from 3k to redline and then you can get a really good idea of what's going on.

09-01-2022, 11:05 PM	#1
Milkbar New Member 7 Rep 22 Posts Drives: E92 Join Date: Apr 2022 Location: NorCal iTrader: (0)	Just flashed MHD Stage 2+ for the first time, how are my logs? Hey all, just flashed MHD Stage 2+ over my Dinan Stage 2. Definitely a noticeable improvement across the board. My current mods: VRSF 5 inch FMIC VRSF Race Exhaust Stock DPs (Getting VRSF High Flow Cats put on next week) I know I probably should have waited until the HFCs were put on but I'm an impatient person. Anyways here are my logs. I did a couple very short pulls but I'm not really able to understand the logs. Seems like I might have a slight boost leak somewhere since I'm not hitting boost target? Or could that be because of my stock cats atm? Thanks for your time yall. Here are three logs from my pulls: https://datazap.me/u/seizethegap/fir...og=0&data=3-12
	Appreciate 0 Tweet Quote

09-02-2022, 01:11 AM	#2
Spooly Private First Class 78 Rep 114 Posts Drives: E90 335i M-Sport LCI Join Date: Oct 2018 Location: East Bay Area, CA iTrader: (0)	You'll need to redo the log correctly for anyone to really help you. You'll want to do a 4th gear pull from like 3000 rpm to redline, full throttle, dsc off. The log you posted ends way too early to be useful.
	Appreciate 1 Torgus3795.50 Quote

09-02-2022, 01:15 AM	#4
Spooly Private First Class 78 Rep 114 Posts Drives: E90 335i M-Sport LCI Join Date: Oct 2018 Location: East Bay Area, CA iTrader: (0)	Also as you seem to already know it's not recommended to run mhd stage 2+ with stock cats, so maybe wait till till you have the HFC to do a log.
	Appreciate 0 Quote

09-02-2022, 07:48 PM	#5
whyzee125 Brigadier General 1992 Rep 4,014 Posts Drives: Dinan stage 2 335i Join Date: Jul 2014 Location: Chattanooga Tn iTrader: (0)	I wouldn't push the car until you get your downpipe, then try again with a log to redline. There's just no sense pushing your hardware that hard when new stuff is on the way as it can be very pricy and there's a reason you need aftermarket downpipe. I do my logs in 3rd, but I go from 3k to redline and then you can get a really good idea of what's going on.
	Appreciate 0 Quote