|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Spilled oil on belt, new belt?
|
|
04-01-2023, 05:39 PM | #1 |
Enlisted Member
1
Rep 47
Posts |
Spilled oil on belt, new belt?
Hi all,
While changing my oil, I opened the oil filter a little too quick and spilled a bunch of oil all over my serpentine belt. I quickly cleaned up as much oil as I could with a towel/brake clean. I replaced the belt + tensioner 10k km ago, so will the belt be able to survive this? If I should change the belt, I can leave the tensioner alone right? |
04-02-2023, 12:33 PM | #2 |
Brigadier General
1995
Rep 4,028
Posts |
IMO you're fine - I've done this before and did the same as you, just cleaned it up quickly. With no active leak, it'll sling most of the remainder off anyway.
|
Appreciate
1
busted323i1.00 |
04-02-2023, 01:29 PM | #3 |
Captain
662
Rep 786
Posts |
This is fine.
__________________
Sometimes a bolt is just a bolt.
|
Appreciate
1
busted323i1.00 |
04-09-2023, 10:47 AM | #5 |
Private
16
Rep 79
Posts |
Belt is likely EPDM elastomer, with moderate grease and oil resistance. BMW Belt life is phenomenal, my original belt has 240K miles.
If concerned, spray w belt dressing. |
Appreciate
0
|
Bookmarks |
|
|