[fespinoza831]

Hello I have a 2007 bmw 328i and it runs fine but suddenly I have a ton of errors all related to k-can. Since it maybe a short/water corrosion where should I start looking? really appreciate any advice.


0093EB
MRS: TCU output - short circuit to positive
00C944
K-CAN line fault - general. / Bus line fault - general.
00C905
K can high line / CAN high, short circuit VB
00C907
Controller K-CAN, bus off / K-CAN communication fault / K can communication
00A6CF
JBE: AUC sensor
00C904
K can low line / CAN low, physical error
00D904
CAS: K-CAN line fault
00A0B0
CAS: Input, brake lights, implausible
00E184
CD / M-ASK / CCC / RAD2 / CHAMP -GW: K-CAN line fault
00E18F
Central registry does not match the target configuration (error registry new).
00E444
SMFA: K-CAN line fault
009CD2
FRM: Drive, mirror pivoting, driver's side, faulty
009CBD
FRM: Communication with step motor controller on the left disrupted
009CBE
FRM: Communication with step motor controller on the right disrupted
00E584
Unfortunately, no error text available / CAN low, physical error / Bus line fault K-CAN / K can short
002DED
DME: Power management, closed-circuit current violation
00A3AD
Message (engine data, 0x1D0) faulty, receiver KOMBI, transmitter DME-DDE
00A3AE
Message (engine speed, 0x0AA) faulty, receiver KOMBI, transmitter DME-DDE
00A3AC
Message (distance travelled, 0x1A6) faulty, receiver KOMBI, transmitter DSC
00A550
Message (speed, 0x1A0) faulty, receiver KOMBI, transmitter DSC
00A554
Instrument cluster: No message (telephone)
00E104
CAN error wire / Can low error

[ptpending]

check the rear right box in the trunk, there is a PDC module which can be damaged by water
the next thing is if windshield is replaced by not very professional people and water now goes to junction box behind glovebox
if you have a sunroof, you need to check if drains are clogged, they are running in a and c pillars with outputs under the car

[fespinoza831]

Thank you, I will get started in the suggested areas.