zpc

luckystrike · 05-29-2006, 01:24 PM

guys i forgot to buy the zpx on my zaino order can i still zaino my car even without it i have zpc, z1, z2, z6, z7 is this enough can my car get that shine and protection?, guys please help thanks a lot!!

bimmernotbeamer · 05-29-2006, 05:20 PM

Please clarify. Did you forget ZPC (the abrasive paint cleaner) or ZFX (the Z2/Z5 accelerator)?

If you forgot ZPC, then you are fine, you can use a different polish if needed.

If you forgot ZFX, then you are still fine because you can use Z1 instead. But you can only do one layer of Z2 intead of three when using ZFX.

pander5 · 05-29-2006, 05:22 PM

I think you mean ZFX Flash Cure? If that's the case no biggie - just wait 24 hours between your layers of Z2. What I would suggest is do your planned routine and finish with one layer of Z2. Then, time permitting, wait till tomorrow and lay down another layer of Z2 or you can do more layers after your next washes.

What the ZFX does is to accelerate the curing of the polymer on your vehicle and allow the immediate application of another layer. Even with ZFX, Zaino recommends you limit to 3 layers within 24 hours. ZFX simply lets you layer up to 3 polish layers in one session. If you don't have ZFX just wait 24 hours between layers for the previous layer to fully cure.

pander5 · 05-29-2006, 05:25 PM

David beat me to it. Plus I missed the fact you have Z1 Polish Lok. Yes, use the Z1 first then apply your Z2.

luckystrike · 05-30-2006, 03:59 AM

ok i think thanx pander5 and davidn , so i have to use z1 and z2 only then let it haze then remove put z6 then buff right? after which wait 24 hours to repeat the z2 and z6?

david: i dont have the zfx only the zpc : (

dejav0o · 05-30-2006, 12:45 PM

Quote:

Originally Posted by luckystrike

ok i think thanx pander5 and davidn , so i have to use z1 and z2 only then let it haze then remove put z6 then buff right? after which wait 24 hours to repeat the z2 and z6?
(

That's correct. Good luck!

bimmernotbeamer · 05-30-2006, 03:22 PM

Quote:

Originally Posted by luckystrike

ok i think thanx pander5 and davidn , so i have to use z1 and z2 only then let it haze then remove put z6 then buff right? after which wait 24 hours to repeat the z2 and z6?

david: i dont have the zfx only the zpc : (

That's correct!

Don't worry, you will be fine with Z1, you don't need ZFX.

05-29-2006, 01:24 PM	#1
luckystrike First Lieutenant 21 Rep 359 Posts Drives: X3 F25b/ X3 G01 / X3 G45 (Ordered) Join Date: Mar 2006 Location: austria iTrader: (0)	zpc guys i forgot to buy the zpx on my zaino order can i still zaino my car even without it i have zpc, z1, z2, z6, z7 is this enough can my car get that shine and protection?, guys please help thanks a lot!! __________________ black saph./black leather/xenon/heated seatscomfort pkg./advantage pkg
	Appreciate 0 Tweet Quote

05-29-2006, 05:20 PM	#2
bimmernotbeamer Lieutenant 28 Rep 581 Posts Drives: N/A Join Date: Sep 2005 Location: N/A iTrader: (0)	Please clarify. Did you forget ZPC (the abrasive paint cleaner) or ZFX (the Z2/Z5 accelerator)? If you forgot ZPC, then you are fine, you can use a different polish if needed. If you forgot ZFX, then you are still fine because you can use Z1 instead. But you can only do one layer of Z2 intead of three when using ZFX.
	Appreciate 0 Quote

05-29-2006, 05:22 PM	#3
pander5 Special Forces - Discretion is superior 32 Rep 1,011 Posts Drives: 335i Coupe Sapphire Black Join Date: Mar 2006 Location: Tampa, FL iTrader: (0) Garage List 2007 335i Coupe [0.00]	I think you mean ZFX Flash Cure? If that's the case no biggie - just wait 24 hours between your layers of Z2. What I would suggest is do your planned routine and finish with one layer of Z2. Then, time permitting, wait till tomorrow and lay down another layer of Z2 or you can do more layers after your next washes. What the ZFX does is to accelerate the curing of the polymer on your vehicle and allow the immediate application of another layer. Even with ZFX, Zaino recommends you limit to 3 layers within 24 hours. ZFX simply lets you layer up to 3 polish layers in one session. If you don't have ZFX just wait 24 hours between layers for the previous layer to fully cure.
	Appreciate 0 Quote

05-29-2006, 05:25 PM	#4
pander5 Special Forces - Discretion is superior 32 Rep 1,011 Posts Drives: 335i Coupe Sapphire Black Join Date: Mar 2006 Location: Tampa, FL iTrader: (0) Garage List 2007 335i Coupe [0.00]	David beat me to it. Plus I missed the fact you have Z1 Polish Lok. Yes, use the Z1 first then apply your Z2.
	Appreciate 0 Quote

05-30-2006, 03:59 AM	#5
luckystrike First Lieutenant 21 Rep 359 Posts Drives: X3 F25b/ X3 G01 / X3 G45 (Ordered) Join Date: Mar 2006 Location: austria iTrader: (0)	ok i think thanx pander5 and davidn , so i have to use z1 and z2 only then let it haze then remove put z6 then buff right? after which wait 24 hours to repeat the z2 and z6? david: i dont have the zfx only the zpc : ( __________________ black saph./black leather/xenon/heated seatscomfort pkg./advantage pkg
	Appreciate 0 Quote