E90Post
 


 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > AUDIO/VIDEO + BLUETOOTH + Electronics/Alarm/Software > E91 PDC working but sound is very faint



Reply
 
Thread Tools Search this Thread
      01-20-2025, 03:52 PM   #1
Dutchsea
New Member
8
Rep
11
Posts

Drives: BMW3 E91
Join Date: Jan 2024
Location: Netherlands

iTrader: (0)

E91 PDC working but sound is very faint

Hi, the PDC beeping sound on my 2006 E91 (M47 engine) stopped workng.
The display shows the distance to objects behind my car but no sound.

Closer inspection showed there is still sound but it is very faint.
The faint PDC sound appears to come from both back speakers.
(While the technical drawing on realoem showed special speakers for my car but probably for a different version)

My car has only rear PDC and no button to activate PDC. I do not know what type of navigation and/or radio i have (business or professional.

I already tried to turn up PDC volume by turning the radio volume knob while PDC is active. This did not help. The rear speakers work fine when playing the radio. Based on above checks innow suspect my PDC control unit to be faulty.

My questions are:
- what likely causes the low PDC beeping volume
- where is the PDC control unit located
- can, if it is the cause of the low PDC sound volume, the control unit be repaired?

Thanks
Appreciate 0
      01-26-2025, 07:14 PM   #2
Dutchsea
New Member
8
Rep
11
Posts

Drives: BMW3 E91
Join Date: Jan 2024
Location: Netherlands

iTrader: (0)

Anybody?
Appreciate 0
      01-27-2025, 07:03 AM   #3
ctuna
Lieutenant General
2098
Rep
13,467
Posts

Drives: 325xi 06 wagon MT
Join Date: Jan 2010
Location: Santa Cruz, Ca

iTrader: (0)

A Head Unit from a Logic 7 car will have to be coded to output Hi Fi which is a 5 volt differential signal . Does this amp supply all speakers or just some of them ?
There are some articles on setting the software levels through Wert values for pdc in the coding section of the first thing can't cut it .


Last edited by ctuna; 01-27-2025 at 07:30 PM..
Appreciate 0
      01-28-2025, 02:44 PM   #4
Dutchsea
New Member
8
Rep
11
Posts

Drives: BMW3 E91
Join Date: Jan 2024
Location: Netherlands

iTrader: (0)

ctuna, thank you for sharing this. I do not have the option to change the pdc volume in my settings menu. (Only bass, treble, fader and balance)
On my model i read it should be possible to change the pdc volume by turning the radio volume while the pdc is active. But that does not work.

The pdc signal is audible on the rear speakers but extremely faint.

So what else could it be?
Appreciate 0
      01-28-2025, 10:29 PM   #5
ctuna
Lieutenant General
2098
Rep
13,467
Posts

Drives: 325xi 06 wagon MT
Join Date: Jan 2010
Location: Santa Cruz, Ca

iTrader: (0)

https://www.e90post.com/forums/showthread.php?t=1076132
The answer might be toward the end of this thread.

If you have aftermarket amps the volume of the pdc will be effected it seems some of the earlier radios didn't have the pdc option .
Appreciate 0
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 04:11 PM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST