[azona2]

hello. i have a built car i live in norway. its a e81 2008 116i n52b25 engine with a e90 2005 ecu dme its basically a 130i clone with a a half a litre smaller engine. i bought a stagefp tune because i have done milvs and intake mods. but it wont do a full read backup read of the ecu in stagefps program i was told it was because its a k-line ecu dme in a D-can car. i have hooked up a K-line cable from pin 2 on dme and to pin 7 on the bimmergeeks copy cable stagefp sent me. but still wont do a full read. it will do a partial read on slow mode. and it will write to the car. so im looking for other soloutions . i have gone over the whole harness all the cables is where it should. can i maybe use bimmerlabs or bimmertools to open up the ecu. then do a tune with stagefp ? i have tried 2 different laptops 2 different cables. im just lost for words hopefully anyone can help. regards k.r norway