[nickster89]

Hey all recently bought a bmw e90 320i 2006 model with a blown head gasket
Replaced the motor with a second hand one
Currently keeps blowing the 30amp fuse in the engine fuse block, suspected an issue with the pcv valve so was going to replace that, went to start the car it cranked once then no power, reconnected positive terminal properly (was loose) and now the front windows do not work and all fuses are in tact
Moving on from that I pulled the intake off to replace the pcv valve and then put it all back together to find it will not crank
The CAS module relay is good the dash shows it’s in park. The brake lights work. The dash lights up with ignition and accessories all the normal stuff but not cranking
Any ideas on what could he going on?
There are no codes recorded on my foxwell NT301 code reader
Any help would be greatly appreciated!

[Socket]

Originally Posted by nickster89

Hey all recently bought a bmw e90 320i 2006 model with a blown head gasket
Replaced the motor with a second hand one
Currently keeps blowing the 30amp fuse in the engine fuse block, suspected an issue with the pcv valve so was going to replace that, went to start the car it cranked once then no power, reconnected positive terminal properly (was loose) and now the front windows do not work and all fuses are in tact
Moving on from that I pulled the intake off to replace the pcv valve and then put it all back together to find it will not crank
The CAS module relay is good the dash shows it’s in park. The brake lights work. The dash lights up with ignition and accessories all the normal stuff but not cranking
Any ideas on what could he going on?
There are no codes recorded on my foxwell NT301 code reader
Any help would be greatly appreciated!

Could be multiple things.... try the technical help group on FB