I need the ecu slidder wire diagram

driving335i · 02-13-2009, 01:41 AM

Hey everyone this is my first post so hopefully im doing this right but my 08 335i was working with the jb3 for 5 months then all of a sudden after service it stoped detecting it. i want to make sure i put all wires in the right pin location. PLEASE HELP ANYONE!!!! i looked for 3 days on the internet for a diagram

MrWhite1015 · 02-13-2009, 07:36 AM

Quote:

Originally Posted by driving335i

Hey everyone this is my first post so hopefully im doing this right but my 08 335i was working with the jb3 for 5 months then all of a sudden after service it stoped detecting it. i want to make sure i put all wires in the right pin location. PLEASE HELP ANYONE!!!! i looked for 3 days on the internet for a diagram

are you in OC NY or OC CA ? if Ny i can check your install for you

driving335i · 02-13-2009, 03:25 PM

Thanks so much for the offer but i am in OC CA

my car was so fast now its just wayyyy slower without the jb3 working. nothing changed with the install when it stoped working cause it was already on. then after i picked the car up from service it was like the jb3 was not there. Is there any way to trouble shoot or something? Maby a wire was misplaced i dont know thats why i would love to find somekind of wire diagram that shows what wire goes in every slot

driving335i · 02-13-2009, 07:42 PM

hahaha no its still there i tried to uninstall it and then reinstall it but its still not working. thats why i want the wire diagram for the ecu to make sure all the oem wires are in the proper place

kptaylor · 02-14-2009, 12:44 PM

Quote:

Originally Posted by driving335i

Hey everyone this is my first post so hopefully im doing this right but my 08 335i was working with the jb3 for 5 months then all of a sudden after service it stoped detecting it. i want to make sure i put all wires in the right pin location. PLEASE HELP ANYONE!!!! i looked for 3 days on the internet for a diagram

Are you just looking for the install instructions?

http://www.burgertuning.com/instruct...nout_guide.pdf

TMR · 02-14-2009, 12:57 PM

If you installed it incorrectly you would have a CE light and the car would not run so good. What version of the JB3 do you have... If it is 1.2, have you tried switching maps? I am in san pedro if you want to drive here i can help you with the install.

Sal@AUTOcouture · 02-14-2009, 01:14 PM

maybe you're on stock boost map?

cn555ic · 02-14-2009, 04:44 PM

I think if the dealer found the tune, I think they would have told you instead of making it not functionable! What you are describing seems odd.

driving335i · 02-16-2009, 08:01 PM

i now have 1.22 but it was doing the same thing with 1.22 i have nooo clue why it is not being detected by my car. the day i drove my car off the lot from service after getting the injector and fuel pump it did not work. i even tryed a different jb3 but it is still doing the same thing and thanks for the offer about u helping me install it but i installed it correctly for sure

any ideas anyone?

02-13-2009, 01:41 AM	#1
driving335i Banned 6 Rep 50 Posts Drives: downpipes, scoops, JB3 1.22,ex Join Date: Feb 2009 Location: orange county iTrader: (0)	I need the ecu slidder wire diagram Hey everyone this is my first post so hopefully im doing this right but my 08 335i was working with the jb3 for 5 months then all of a sudden after service it stoped detecting it. i want to make sure i put all wires in the right pin location. PLEASE HELP ANYONE!!!! i looked for 3 days on the internet for a diagram
	Appreciate 0 Tweet Quote

02-13-2009, 03:25 PM	#3
driving335i Banned 6 Rep 50 Posts Drives: downpipes, scoops, JB3 1.22,ex Join Date: Feb 2009 Location: orange county iTrader: (0)	... Thanks so much for the offer but i am in OC CA my car was so fast now its just wayyyy slower without the jb3 working. nothing changed with the install when it stoped working cause it was already on. then after i picked the car up from service it was like the jb3 was not there. Is there any way to trouble shoot or something? Maby a wire was misplaced i dont know thats why i would love to find somekind of wire diagram that shows what wire goes in every slot
	Appreciate 0 Quote

02-13-2009, 07:42 PM	#4
driving335i Banned 6 Rep 50 Posts Drives: downpipes, scoops, JB3 1.22,ex Join Date: Feb 2009 Location: orange county iTrader: (0)	hahaha no its still there i tried to uninstall it and then reinstall it but its still not working. thats why i want the wire diagram for the ecu to make sure all the oem wires are in the proper place
	Appreciate 0 Quote

02-14-2009, 12:57 PM	#6
TMR Brigadier General 398 Rep 3,159 Posts Drives: M3 Join Date: Jun 2008 Location: Torrance iTrader: (12)	If you installed it incorrectly you would have a CE light and the car would not run so good. What version of the JB3 do you have... If it is 1.2, have you tried switching maps? I am in san pedro if you want to drive here i can help you with the install.
	Appreciate 0 Quote

02-14-2009, 01:14 PM	#7
Sal@AUTOcouture 744 Rep 10,106 Posts Drives: E93 M3, E36 M3 Join Date: Feb 2007 Location: Sofla iTrader: (30)	maybe you're on stock boost map?
	Appreciate 0 Quote

02-14-2009, 04:44 PM	#8
cn555ic 460 Rep 18,331 Posts Drives: 335i Join Date: Jun 2007 Location: US iTrader: (6)	I think if the dealer found the tune, I think they would have told you instead of making it not functionable! What you are describing seems odd.
	Appreciate 0 Quote

02-16-2009, 08:01 PM	#9
driving335i Banned 6 Rep 50 Posts Drives: downpipes, scoops, JB3 1.22,ex Join Date: Feb 2009 Location: orange county iTrader: (0)	i now have 1.22 but it was doing the same thing with 1.22 i have nooo clue why it is not being detected by my car. the day i drove my car off the lot from service after getting the injector and fuel pump it did not work. i even tryed a different jb3 but it is still doing the same thing and thanks for the offer about u helping me install it but i installed it correctly for sure any ideas anyone?
	Appreciate 0 Quote