JB3 install on Long Island

bigsil · 03-09-2009, 11:24 PM

Can anyone recommend a place to have the JB3 installed on Long Island New York? Much Thanks!

darkphantom · 03-10-2009, 01:22 AM

pin out or pnp? if it's PNP - DIY!

Blue Bruno · 03-10-2009, 02:20 AM

I agree, you can do the PNP yourself. I did it a few weeks ago. The instructions and video available online are very good. Take some time to study them first. The hardest part is just learning how the various pastic pieces you need to remove (to access the ecu) snap off and on. Take your time. That being said, if you're just not confident in your mechanical ability, there's no shame in paying for it.

Blue Bruno · 03-10-2009, 02:21 AM

Also, Terry answers his cell phone if you need help!

Sal@AUTOcouture · 03-10-2009, 07:58 AM

if u wanna come out to NJ I can help ya out

dmboone25 · 03-10-2009, 08:59 AM

I had to take mine out for the first time this weekend--and I paid to have it put in, as I am a self-described mechanical moron.

I had a buddy help me, and had someone who had put one in many times before on the phone. That part was really helpful--he knew which way the clips had to go, when to pull a little harder, etc. It made it easy, and I was so afraid I would end up breaking something.

The real key is to take your time--I had my laptop out by the car with the video running, and we had watched it a few times before we started. It really isn't hard, but I too understand if you are worried about doing it yourself.

BTW--the PnP is much easier than the pin-out.

mwahlert · 03-10-2009, 09:41 AM

where on LI are you? i'm in rocky point - i'd be happy to help....i've installed the jb3 pin out, jb3 pnp, and procede pnp.

BoostedCosta · 03-10-2009, 12:59 PM

alex@supremepower can install it for you
he has a shop now

Blue Bruno · 03-10-2009, 05:00 PM

Wow, two guys just offered to help. Very cool.

Quote:

Originally Posted by mwahlert

where on LI are you? i'm in rocky point - i'd be happy to help....i've installed the jb3 pin out, jb3 pnp, and procede pnp.

bigsil · 07-23-2011, 01:08 PM

closed

03-09-2009, 11:24 PM	#1
bigsil Bigsil 7 Rep 31 Posts Drives: 2008 BMW 335xi Join Date: Oct 2008 Location: Long Island, New York iTrader: (1)	JB3 install on Long Island Can anyone recommend a place to have the JB3 installed on Long Island New York? Much Thanks!
	Appreciate 0 Tweet Quote

03-10-2009, 01:22 AM	#2
darkphantom Banned 625 Rep 5,945 Posts Drives: E93 335i Join Date: Aug 2007 Location: The place for Bimmers iTrader: (4)	pin out or pnp? if it's PNP - DIY!
	Appreciate 0 Quote

03-10-2009, 02:20 AM	#3
Blue Bruno Enlisted Member 0 Rep 47 Posts Drives: 2007 335i E92 Join Date: Feb 2009 Location: Seattle iTrader: (0)	I agree, you can do the PNP yourself. I did it a few weeks ago. The instructions and video available online are very good. Take some time to study them first. The hardest part is just learning how the various pastic pieces you need to remove (to access the ecu) snap off and on. Take your time. That being said, if you're just not confident in your mechanical ability, there's no shame in paying for it.
	Appreciate 0 Quote

03-10-2009, 02:21 AM	#4
Blue Bruno Enlisted Member 0 Rep 47 Posts Drives: 2007 335i E92 Join Date: Feb 2009 Location: Seattle iTrader: (0)	Also, Terry answers his cell phone if you need help!
	Appreciate 0 Quote

03-10-2009, 07:58 AM	#5
Sal@AUTOcouture 746 Rep 10,106 Posts Drives: E93 M3, E36 M3 Join Date: Feb 2007 Location: Sofla iTrader: (30)	if u wanna come out to NJ I can help ya out
	Appreciate 0 Quote

03-10-2009, 08:59 AM	#6
dmboone25 Lieutenant General 4993 Rep 10,212 Posts Drives: 2024 Golf R / 718 SRS (on way) Join Date: Sep 2006 Location: Dallas, TX iTrader: (0) Garage List 2007 E92 328i [10.00] 2007 328i [10.00]	I had to take mine out for the first time this weekend--and I paid to have it put in, as I am a self-described mechanical moron. I had a buddy help me, and had someone who had put one in many times before on the phone. That part was really helpful--he knew which way the clips had to go, when to pull a little harder, etc. It made it easy, and I was so afraid I would end up breaking something. The real key is to take your time--I had my laptop out by the car with the video running, and we had watched it a few times before we started. It really isn't hard, but I too understand if you are worried about doing it yourself. BTW--the PnP is much easier than the pin-out. __________________ Past rides: 2022 718 Spyder, 2022 MINI JCW, 2016 981 BGTS, 2020 MINI JCW, 2017 F80, 2015 981 CS, 2014 F22 235, 2011 E82 135, 2008 E82 135, 2007 E92 328, 2007 E92 328 (My lady drives an OG M2. So does my dad)
	Appreciate 0 Quote

03-10-2009, 09:41 AM	#7
mwahlert Lieutenant Colonel 97 Rep 1,659 Posts Drives: 2009 335i Join Date: Apr 2008 Location: NC iTrader: (8)	where on LI are you? i'm in rocky point - i'd be happy to help....i've installed the jb3 pin out, jb3 pnp, and procede pnp.
	Appreciate 0 Quote

03-10-2009, 12:59 PM	#8
BoostedCosta SUPERMAN 125 Rep 3,171 Posts Drives: AW e90 335i M-Sport Join Date: Jul 2008 Location: nj iTrader: (6)	alex@supremepower can install it for you he has a shop now __________________ MODS: JB3 18ohm \| AR Design Catlles Downpipes \| CDV Delete \| Clutch Masters FX400 \| ZEX Nitrous Kit \| Devils Own Methonal Kit \| VMR V701 (Matte Black) \| H&r Race Springs\| BMW Perf Grilles\|
	Appreciate 0 Quote

07-23-2011, 01:08 PM	#10
bigsil Bigsil 7 Rep 31 Posts Drives: 2008 BMW 335xi Join Date: Oct 2008 Location: Long Island, New York iTrader: (1)	closed
	Appreciate 0 Quote