CF interior trim install help..

KnightsCapone · 03-25-2009, 02:45 AM

I bought a CF interior trim kit the overlay pieces but cant seem to get them to stick onto my existing woor trim..I will say the fitment isnt perfect and the pieces are very rigid but if i can get them to stick for long enough to bind they will stay..I hope...any suggestions would be very helpful at this point?? I have tried using silicone and double sided tape with no avail up to this point
Also, Im looking to buy the larger CF dash trim piece and front and back door pieces if anyone has for sale..overlay or replacement pieces will do?? THX

dsc201knoc · 03-25-2009, 02:56 AM

sounds rough man.. I hope you can figure it out.. are you removing the existing trim pieces while you put the overlays on or just trying to install the overlays over the trim while its in the car?

If you are installing with it still in the car, I would recommend pulling it out then maybe wrapping a towel/thin piece of wood over the towel (towel so it doesnt scratch and wood for even pressure) around it and using little c clamps apply some decent presure while your adhesive sets.

03-25-2009, 02:45 AM	#1
KnightsCapone A pure fighting machine with only one desire - Win 23 Rep 280 Posts Drives: 2014 F10 M5 & 2015 F15 X5 5.0L Join Date: Dec 2008 Location: SLC, Utah iTrader: (3)	CF interior trim install help.. I bought a CF interior trim kit the overlay pieces but cant seem to get them to stick onto my existing woor trim..I will say the fitment isnt perfect and the pieces are very rigid but if i can get them to stick for long enough to bind they will stay..I hope...any suggestions would be very helpful at this point?? I have tried using silicone and double sided tape with no avail up to this point Also, Im looking to buy the larger CF dash trim piece and front and back door pieces if anyone has for sale..overlay or replacement pieces will do?? THX
	Appreciate 0 Tweet Quote

03-25-2009, 02:56 AM	#2
dsc201knoc thatbimmerguy 144 Rep 1,050 Posts Drives: 95 ///M3, 97 ///M3, 08 2002 Join Date: Apr 2008 Location: The East Coast - NC iTrader: (14) Garage List 2008 BMW 2002 (135i) [8.00]	sounds rough man.. I hope you can figure it out.. are you removing the existing trim pieces while you put the overlays on or just trying to install the overlays over the trim while its in the car? If you are installing with it still in the car, I would recommend pulling it out then maybe wrapping a towel/thin piece of wood over the towel (towel so it doesnt scratch and wood for even pressure) around it and using little c clamps apply some decent presure while your adhesive sets. __________________ 1995 ///M3 Coupe - 1997 ///M3 Sedan - 2008 2002 - 79 VW Rabbit - 82 Volvo 244 Turbo 135 For Sale Parts Feeler LET THE EAST COAST PLAY TOO!!!
	Appreciate 0 Quote