[bimmer ///man]

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

I have a set of 19x8.5 ET15, 19x10 ET25 BBS RS-GT's in Diamond black for sale. They are m5/m6 fitment. They were originally on a BMW 645 for 10k miles. They had the cars original tires on them when I bought them. They are in great condition. There are a few marks on the lips an one scuff to the face of the wheel which can be seen in the wheel 1 pic.



$5000 before tax and shipping. The 10" rears are backordered on tire rack.



These are BBS' top of the line wheels along with LM's, LM-R's, etc.



Here are the pics:









Wheel 1:





Wheel 2:





Wheel 3:





Wheel 4:





I'm going to say $4,150 shipped to any where in the US or best offer.

[bubbletea 4 me]

nice wheels.. my fav along with LM-Rs

[E90PWR]

wow

[positiveions]

I wish the rears will fit on my ZHP. But BUMP for clean wheels.

[bimmer ///man]

Thanks guys. I was really tempted to put them on my e36, they would have fit, but I think 19" wheels are too big for the e36 and I would rather run 275's in the rear than 245's. These wheels look amazing in person!

[bimmer ///man]

Bump

[bimmer ///man]

BUMP

[bimmer ///man]

BUMP

[slixx1320]

I wouldn't say they are top of the line wheels. I think the e88's are by far the top and best looking.

[bimmer ///man]

Oh ok. But those are motorsport wheels and cost close to 3k a wheel.

[bimmer ///man]

Here are some pics: They aren't my wheels but same size and specs.

[bimmer ///man]

BUMP for $3750 shipped.

[PNF]

Bump for good wheels! wish I can afford a $5000 wheel after everything is said and done with the tires.

[bimmer ///man]

Yeah, most people can re-use their 19" tires on these. You gotta pay to play, and when you play like this you can't lose.

[bimmer ///man]

BUMP

[bimmer ///man]

Would like to sell by the end of the weekend.

[AWD Addict]

These wheels are rolling secks. Wish they fit my e92!

[bimmer ///man]

I'm pretty sure they might. Read the post where I talk about it a few post above this one.

[bimmer ///man]

Edit: Nevermind. Here it is. I believe that the e90 non-m's and m's are the same fender wise.

"Here are stock wheel offsets for the M3:

The wheel sizes are

18" style 260

Front 8,5J ET:29
Rear 9,5J ET:23

19" Style 220
Front 8,5J ET:29
Rear 9,5J ET:23

Ok, I believe that the wheels will fit based on this thread. http://www.m3post.com/forums/showthread.php?t=237959

And the offsets provided above.

Honestly, I think this set up on an E90 will be amazing because they are way more aggressive offsets than what is offered through bbs for the m3.

So, in the thread I linked it is said that you can run 15mm spacers all around with no rubbing. So, that would mean that the offset of the front wheels with a 15mm spacer would be ET14. My wheels are 19x8.5 ET15.

As for the rears the lip should poke roughly half an inch more or 12.7mm than stock. So, based on all the info I believe that these should fit your car. You may need a small roll, but I am not sure. You'll see once you mount them. There is a guy running 19x11 in the rear just for reference.

These fitments aren't insane so but they are aggressive enough that I think it will give it that key stance."

[bimmer ///man]

BUMP

[bimmer ///man]

bump

[E90PWR]

they will fit however you will need a lot of fender work

just like this guy!

http://www.e90post.com/forums/showpo...7&postcount=20