V3 Rev. 1 91 oct Stage 1 & 2 Dyno

HB335 · 04-01-2009, 12:45 AM

91 octane gas

My Mods:
Procede V3 Rev. 1, TQ 90% MT Doomsday map
Vishnu DCI
Riss Racing Catless Downpipes
AE HFC Exhaust
Forge DVs

Red is stage 1
Blue is stage 2

On a side note the AE crew installed my helix FMIC intercooler. Thanks guys! I bumped the procede setting to stage 3 and raised the TQ to 92% and all I can say is that my car pulls like crazy over 5000rpm. My gf was kinda sleepy and then I raced a sti and she woke up pretty quick.

I will be dynoing my car with the FMIC sometime in the future. I have the baseline dynos somewhere, I'll post those too. I think my max power completely stock was around 276hp.

lpphreakx06 · 04-01-2009, 12:47 AM

Pics don't load for me

Sniz · 04-01-2009, 12:48 AM

no workie

Mote · 04-01-2009, 12:49 AM

Pics don't work.. can you just post your numbers?

HB335 · 04-01-2009, 12:58 AM

I tried using the insert image function but it no workie. If anyone knows how to post pictures properly let me know.

Stage 1 Max Torque 359.39 Max Power 343.89
Stage 2 Max Torque 356.72 Max Power 353.28

JB335 · 04-01-2009, 01:03 AM

IF you want to email them to me I can post them for you. Send me a PM for my email address

HB335 · 04-01-2009, 01:05 AM

There we go

OpenFlash · 04-01-2009, 01:08 AM

Nice. And STD numbers (what is usually posted on this forum) would have been ~5whp higher. Just curious, does your AE exhaust still have a pair of high flow cats in it? Or are you completely catless? On 91oct, little things like that make a difference (along with thinks like dyno fans, cooldown time, adaption time, etc,.) Out of state (93oct) guys can get away with murder on the dyno.

shiv

runningman · 04-01-2009, 01:11 AM

Looks pretty bumpy... Sure that isn't a JB3 installed instead of V3?

ontopofm · 04-01-2009, 01:21 AM

are the numbers kinda low?

OpenFlash · 04-01-2009, 01:27 AM

Quote:

Originally Posted by ontopofm

are the numbers kinda low?

He's making around 360whp STD on 91oct. If that is with one set of cats still in the system, that's pretty darn good as far as peak numbers go. If that is fully catless, then I would say it's about 10-15whp low. But that could be explained by inadequate IC cooling fans. Just guessing on that since you can see the DME pull back timing at 5200rpm. That's why max power is at 6500rpm when it should be at 6000rpm.

Shiv

HB335 · 04-01-2009, 12:09 PM

My AE Exhaust does have cats in it.

cstmx_ryder · 04-01-2009, 01:25 PM

You should definitely do some more pulls on each stage to give it adaptation time......As I changed stages and continued doing more and more pulls, I usually see more gain on the second or third pulls after the car adapts.

Numbers looks good, except it looks a bit bumpy? Especially on the torque side........Any reason for that? And did you feel the bumpiness while in the car dynoing?

HB335 · 04-02-2009, 01:33 AM

Honestly I didn't give it much adapation time. I by accidently did one run on my low boost map, the 2nd run was stage 1 , and the 3rd run was stage 2. I'm not really looking to max my dyno numbers. I just wanted to get a reference number to see if my mods are making more power and to share my results with the community. I'm looking forward to dynoing with the fmic installed. I felt a huge difference in the upper rpms at full throttle with fmic installed.

HB335 · 04-02-2009, 01:48 AM

Quote:

Originally Posted by shiv@vishnu

He's making around 360whp STD on 91oct. If that is with one set of cats still in the system, that's pretty darn good as far as peak numbers go. If that is fully catless, then I would say it's about 10-15whp low. But that could be explained by inadequate IC cooling fans. Just guessing on that since you can see the DME pull back timing at 5200rpm. That's why max power is at 6500rpm when it should be at 6000rpm.

Shiv

With STD numbers Its 362.76 hp and torque is at 366.30. Thanks for the great product Shiv. Really enjoying the Procede especially with the FMIC installed and looking forward to the canbus upgrade

OpenFlash · 04-02-2009, 06:44 AM

Quote:

Originally Posted by HB335

With STD numbers Its 362.76 hp and torque is at 366.30. Thanks for the great product Shiv. Really enjoying the Procede especially with the FMIC installed and looking forward to the canbus upgrade

362whp with the stock FMIC, a pair of cats still in the system on a Stg 2 map running on 91oct isn't bad at all! With the FMIC installed and now on the Stg 3 map, you should see ~375whp. And ~385whp if you decide to go completely catless. Glad you are enjoying the tune

Shiv

04-01-2009, 12:45 AM	#1
HB335 Private 7 Rep 72 Posts Drives: 335 Coupe Join Date: Oct 2007 Location: So Cal, CA iTrader: (0)	V3 Rev. 1 91 oct Stage 1 & 2 Dyno 91 octane gas My Mods: Procede V3 Rev. 1, TQ 90% MT Doomsday map Vishnu DCI Riss Racing Catless Downpipes AE HFC Exhaust Forge DVs Red is stage 1 Blue is stage 2 On a side note the AE crew installed my helix FMIC intercooler. Thanks guys! I bumped the procede setting to stage 3 and raised the TQ to 92% and all I can say is that my car pulls like crazy over 5000rpm. My gf was kinda sleepy and then I raced a sti and she woke up pretty quick. I will be dynoing my car with the FMIC sometime in the future. I have the baseline dynos somewhere, I'll post those too. I think my max power completely stock was around 276hp. Last edited by HB335; 04-01-2009 at 01:05 AM.. Reason: Wasn't able to post picture
	Appreciate 0 Tweet Quote

04-01-2009, 12:47 AM	#2
lpphreakx06 Professional Moose Racer 325 Rep 7,509 Posts Drives: SG 335i E92 RIP + 2015 SS M3 Join Date: Jul 2008 Location: Bellevue, Wa iTrader: (25)	Pics don't load for me __________________ Visit my blog anytime: http://www.sfpayments.com BMW Dream Team PNW Chapter, member #1 \|HP Autowerks \| AR DESIGN \| BMW PERFORMANCE \| STOP TECH \| Volk Racing\| AMS \| ARKYM
	Appreciate 0 Quote

04-01-2009, 12:48 AM	#3
Sniz Lieutenant General 680 Rep 10,584 Posts Drives: e92 335 - gone // e36 M3 turbo Join Date: Mar 2007 Location: Ellicott City, MD iTrader: (1)	no workie __________________
	Appreciate 0 Quote

04-01-2009, 12:49 AM	#4
Mote Colonel 143 Rep 2,162 Posts Drives: 2008 E92 - 1991 E30 Join Date: Jan 2008 Location: Beverly Hills, CA iTrader: (0)	Pics don't work.. can you just post your numbers?
	Appreciate 0 Quote

04-01-2009, 12:58 AM	#5
HB335 Private 7 Rep 72 Posts Drives: 335 Coupe Join Date: Oct 2007 Location: So Cal, CA iTrader: (0)	I tried using the insert image function but it no workie. If anyone knows how to post pictures properly let me know. Stage 1 Max Torque 359.39 Max Power 343.89 Stage 2 Max Torque 356.72 Max Power 353.28
	Appreciate 0 Quote

04-01-2009, 01:03 AM	#6
JB335 Banned 34 Rep 1,034 Posts Drives: 335is Join Date: Aug 2008 Location: so cal iTrader: (1) Garage List 2011 BMW 335IS [7.60]	IF you want to email them to me I can post them for you. Send me a PM for my email address
	Appreciate 0 Quote

04-01-2009, 01:05 AM	#7
HB335 Private 7 Rep 72 Posts Drives: 335 Coupe Join Date: Oct 2007 Location: So Cal, CA iTrader: (0)	There we go
	Appreciate 0 Quote

04-01-2009, 01:08 AM	#8
OpenFlash 1806 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	Nice. And STD numbers (what is usually posted on this forum) would have been ~5whp higher. Just curious, does your AE exhaust still have a pair of high flow cats in it? Or are you completely catless? On 91oct, little things like that make a difference (along with thinks like dyno fans, cooldown time, adaption time, etc,.) Out of state (93oct) guys can get away with murder on the dyno. shiv
	Appreciate 0 Quote

04-01-2009, 01:11 AM	#9
runningman Banned 4 Rep 150 Posts Drives: 335i SP Join Date: Feb 2009 Location: nj iTrader: (0)	Looks pretty bumpy... Sure that isn't a JB3 installed instead of V3?
	Appreciate 0 Quote

04-01-2009, 01:21 AM	#10
ontopofm Lieutenant Colonel 79 Rep 1,548 Posts Drives: stock Join Date: Jun 2007 Location: CA iTrader: (4)	are the numbers kinda low?
	Appreciate 0 Quote

04-01-2009, 12:09 PM	#12
HB335 Private 7 Rep 72 Posts Drives: 335 Coupe Join Date: Oct 2007 Location: So Cal, CA iTrader: (0)	My AE Exhaust does have cats in it.
	Appreciate 0 Quote

04-01-2009, 01:25 PM	#13
cstmx_ryder Colonel 171 Rep 2,875 Posts Drives: A metal box with a roundel Join Date: Jul 2007 Location: Portland, OR iTrader: (2)	You should definitely do some more pulls on each stage to give it adaptation time......As I changed stages and continued doing more and more pulls, I usually see more gain on the second or third pulls after the car adapts. Numbers looks good, except it looks a bit bumpy? Especially on the torque side........Any reason for that? And did you feel the bumpiness while in the car dynoing? __________________ '08 AW E90 335i PROcede V5 \| BMS DCI \| RR DPs \| ETS FMIC \| FORGE DVs \| Stett CP \| Vanguard \| PSS10
	Appreciate 0 Quote

04-02-2009, 01:33 AM	#14
HB335 Private 7 Rep 72 Posts Drives: 335 Coupe Join Date: Oct 2007 Location: So Cal, CA iTrader: (0)	Honestly I didn't give it much adapation time. I by accidently did one run on my low boost map, the 2nd run was stage 1 , and the 3rd run was stage 2. I'm not really looking to max my dyno numbers. I just wanted to get a reference number to see if my mods are making more power and to share my results with the community. I'm looking forward to dynoing with the fmic installed. I felt a huge difference in the upper rpms at full throttle with fmic installed.
	Appreciate 0 Quote