Need good exhaust shop in Seatac area.

samps · 04-09-2009, 12:18 AM

I'm going to be getting my Bastuck in a few weeks. I'm having it shipped to a friend in Seatac. Can anyone recommend a good exhaust shop in that area for me to go to? Preferably one that someone has used before and that I can trust with a BMW.

TIA.

samps · 04-13-2009, 01:24 AM

No one?

I can just go to a Midas but thought I'd ask here first.

scollins · 04-13-2009, 02:34 AM

Sorry, not much help. I installed my AE myself, in my driveway, using Rhino Ramps. Not exactly something I'd like to try again though.....

I think the Bastuck requires cutting and/or welding? The AE is totally "bolt on."

Wish I could be of more help...

samps · 04-13-2009, 03:06 AM

Thanks anyway. Actually the stock pipes need to be cut just after the diff (I think), and then bolt on from there. If there are no other suggestions I might just head over to a Midas. I'm coming down from Vancouver so don't really know any shops there (other than Midas).

scollins · 04-13-2009, 12:04 PM

I did a quick search on a few other BMW regional forums, and a few guys have recommended this place in the past:
Dan Fast Muffler & Brake
12200 Ne 12th St Ste 1
Bellevue, WA 98005
(425) 455-0404

Not exactly close to SeaTac, but somewhat on the way home to BC...

I actually had them fab up a "test pipe" for me a few years for my Dodge Ram, and I don't remember any negative issues with the shop. Might be worth a call to see how much they'd charge.

samps · 04-13-2009, 02:55 PM

Thanks scollins. Bellevue is a little ways away. But worth a shot.

Adamk24 · 04-13-2009, 07:00 PM

Quote:

Originally Posted by scollins

I did a quick search on a few other BMW regional forums, and a few guys have recommended this place in the past:
Dan Fast Muffler & Brake
12200 Ne 12th St Ste 1
Bellevue, WA 98005
(425) 455-0404

Not exactly close to SeaTac, but somewhat on the way home to BC...

I actually had them fab up a "test pipe" for me a few years for my Dodge Ram, and I don't remember any negative issues with the shop. Might be worth a call to see how much they'd charge.

I took my car there about 2 months ago and had them make me a set of straight pipes. Aaron over there does great work, I've been very pleased with how it came out. If there is nothing closer I definitely recommend giving Dan Fast a call. It was about $250 for me to get straight pipes made by cutting up a stock axle back, and cutting off/flanging my stock exhaust and mufflers so I could swap between the Straights and the Stocks nice and easy. For a simple cut off and weld on of an axle back it would probably be $100-200. I got my car back the same day also which was nice

Septro · 04-13-2009, 08:46 PM

Hmm.. they could probably do quad tips real easy?? Hmmm indeed..

04-09-2009, 12:18 AM	#1
samps Captain 31 Rep 670 Posts Drives: Transit Join Date: May 2008 Location: GVA iTrader: (2)	Need good exhaust shop in Seatac area. I'm going to be getting my Bastuck in a few weeks. I'm having it shipped to a friend in Seatac. Can anyone recommend a good exhaust shop in that area for me to go to? Preferably one that someone has used before and that I can trust with a BMW. TIA.
	Appreciate 0 Tweet Quote

04-13-2009, 01:24 AM	#2
samps Captain 31 Rep 670 Posts Drives: Transit Join Date: May 2008 Location: GVA iTrader: (2)	No one? I can just go to a Midas but thought I'd ask here first.
	Appreciate 0 Quote

04-13-2009, 02:34 AM	#3
scollins Bootleggin' 'n Gunrunnin' 155 Rep 2,372 Posts Drives: 2024 X3 M40i Join Date: May 2007 Location: Renton, WA iTrader: (3)	Sorry, not much help. I installed my AE myself, in my driveway, using Rhino Ramps. Not exactly something I'd like to try again though..... I think the Bastuck requires cutting and/or welding? The AE is totally "bolt on." Wish I could be of more help... __________________ Scott 2024 G01 X3 M40i, Brooklyn Grey Metallic /// 2015 F15 X5 35i, Space Gray Metallic, 99K miles /// 2013 F30 320xi, Mojave Metallic, 112k miles 2019 Ford F450 STX, Oxford White 2013 Ducati Multistrada Touring S, Red
	Appreciate 0 Quote

04-13-2009, 03:06 AM	#4
samps Captain 31 Rep 670 Posts Drives: Transit Join Date: May 2008 Location: GVA iTrader: (2)	Thanks anyway. Actually the stock pipes need to be cut just after the diff (I think), and then bolt on from there. If there are no other suggestions I might just head over to a Midas. I'm coming down from Vancouver so don't really know any shops there (other than Midas).
	Appreciate 0 Quote

04-13-2009, 12:04 PM	#5
scollins Bootleggin' 'n Gunrunnin' 155 Rep 2,372 Posts Drives: 2024 X3 M40i Join Date: May 2007 Location: Renton, WA iTrader: (3)	I did a quick search on a few other BMW regional forums, and a few guys have recommended this place in the past: Dan Fast Muffler & Brake 12200 Ne 12th St Ste 1 Bellevue, WA 98005 (425) 455-0404 Not exactly close to SeaTac, but somewhat on the way home to BC... I actually had them fab up a "test pipe" for me a few years for my Dodge Ram, and I don't remember any negative issues with the shop. Might be worth a call to see how much they'd charge. __________________ Scott 2024 G01 X3 M40i, Brooklyn Grey Metallic /// 2015 F15 X5 35i, Space Gray Metallic, 99K miles /// 2013 F30 320xi, Mojave Metallic, 112k miles 2019 Ford F450 STX, Oxford White 2013 Ducati Multistrada Touring S, Red
	Appreciate 0 Quote

04-13-2009, 02:55 PM	#6
samps Captain 31 Rep 670 Posts Drives: Transit Join Date: May 2008 Location: GVA iTrader: (2)	Thanks scollins. Bellevue is a little ways away. But worth a shot.
	Appreciate 0 Quote

04-13-2009, 08:46 PM	#8
Septro Banned 78 Rep 1,649 Posts Drives: '08 e90 335xi Join Date: Jun 2008 Location: C-Bus, OH iTrader: (1)	Hmm.. they could probably do quad tips real easy?? Hmmm indeed..
	Appreciate 0 Quote