[stimpy]

Installed FK Silverline Plus X's on my ride -- how do I adjust the dampening on both fronts and rears?

[mike-y]

I believe FK's use koni shocks if my memory serves right. If that's the case, there should be a post that sticks up from the top of the shock shaft. turn that counter-clockwise to increase rebound dampening. Usually, those shocks come with an separate adjustment knob that you slide over the post that makes the valve easier to turn.

[cn555ic]

Originally Posted by mike-y

I believe FK's use koni shocks if my memory serves right. If that's the case, there should be a post that sticks up from the top of the shock shaft. turn that counter-clockwise to increase rebound dampening. Usually, those shocks come with an separate adjustment knob that you slide over the post that makes the valve easier to turn.

the rears have to be removed to adjust

[stimpy]

Originally Posted by cn555ic

the rears have to be removed to adjust

And the fronts can be done via engine bay and moving the k bar out of the way yes? I believe it's called a K bar anyway...

[cn555ic]

Originally Posted by stimpy

And the fronts can be done via engine bay and moving the k bar out of the way yes? I believe it's called a K bar anyway...

Yep the fronts are pretty easy...and done through the shock tower....rears are PITA...

[stimpy]

Thanks much .. wish I would of remembered to check the dampening before the install... lol.