the car is done but dont feel any diffrience even feel like lost power!

Ferre86 · 06-16-2009, 05:24 PM

all my mods are shows in my signutare, installation just completed but it feels like something holding the car not go fast and also gears are taking so long especially on higher rpm's also after changing the gear car banks up so bad. and on my gauges ( RiXeffects ) it shows car boots around mostly 14.0 to 14.8 psi is it normal ? also the car overheating so fast and going on high temperature , it wasnt that bad before. but i m absolutry sure on that i havent feel any diffrience that i again even lost alot...

OpenFlash · 06-16-2009, 05:29 PM

Quote:

Originally Posted by Ferre86

all my mods are shows in my signutare, installation just completed but it feels like something holding the car not go fast and also gears are taking so long especially on higher rpm's also after changing the gear car banks up so bad. and on my gauges ( RiXeffects ) it shows car boots around mostly 14.0 to 14.8 psi is it normal ? also the car overheating so fast and going on high temperature , it wasnt that bad before. but i m absolutry sure on that i havent feel any diffrience that i again even lost alot...

Something isn't right if your car is overheating. Stop your car. Disconnect the battery. Check to make sure your fans spin freely. I've seen times where a socket has gotten lodged in the fan, causing it to seize up. Car runs but it runs slowly and gets very hot. Don't drive your car if it's overheating. The problem has to be solved first.

If you have any questions, please call us.

Shiv

Ferre86 · 06-16-2009, 05:38 PM

Quote:

Originally Posted by shiv@vishnu

Something isn't right if your car is overheating. Stop your car. Disconnect the battery. Check to make sure your fans spin freely. I've seen times where a socket has gotten lodged in the fan, causing it to seize up. Car runs but it runs slowly and gets very hot. Don't drive your car if it's overheating. The problem has to be solved first.

If you have any questions, please call us.

Shiv

it seems fans are working fine there s no sound or something though...

OpenFlash · 06-16-2009, 05:40 PM

Quote:

Originally Posted by Ferre86

it seems fans are working fine there s no sound or something though...

Why don't you call us? You have a lot of mods in your car. Lots of potential for installation error. 866-584-7531

Mr. 5 · 06-16-2009, 05:45 PM

I'm really confused with what exactly you did.

You say the car is done and the mods are in your sig, but what did you recently do???

anklegrabber · 06-16-2009, 06:12 PM

He just finished installing his PROcede V3 RevII.

http://www.e90post.com/forums/showthread.php?t=272402

He's been having some problems along the way.

Hope you get them resolved.

lpphreakx06 · 06-16-2009, 06:23 PM

Put it in DS!

Ferre86 · 06-17-2009, 07:39 AM

alright today i had few more runs, the tempeture seems fine now but as i said before on the high rpm's ( 5-7 ) the car is shaking and takes too long to reach 7,000rpm and around 200-240km's on high speed engine light comes on, after slowing down it goes away or if i stop the car and start it again everything becomes normal. everything seems fine but theres another thing i wanna let you guys know, on my first try to install on vishnu i had few lights on, ( engine , transmission , etc.. ) after install it corretly all lights gone but we deleted lot of codes that the car gives it. yes theres no more codes or lights but the car could be on protection mode or something ?

enrita · 06-17-2009, 07:59 AM

YOU HAVE TO CALL Vishnu for support! They are the only one that can help you troubleshoot the problem.

jpsimon · 06-17-2009, 09:59 AM

Quote:

Originally Posted by Ferre86

alright today i had few more runs, the tempeture seems fine now but as i said before on the high rpm's ( 5-7 ) the car is shaking and takes too long to reach 7,000rpm and around 200-240km's on high speed engine light comes on, after slowing down it goes away or if i stop the car and start it again everything becomes normal. everything seems fine but theres another thing i wanna let you guys know, on my first try to install on vishnu i had few lights on, ( engine , transmission , etc.. ) after install it corretly all lights gone but we deleted lot of codes that the car gives it. yes theres no more codes or lights but the car could be on protection mode or something ?

Did you try calling Vishnu yet? That's the very first thing you should do

ar design · 06-17-2009, 10:12 AM

Quote:

Originally Posted by shiv@vishnu

Don't drive your car if it's overheating. The problem has to be solved first.

2nd that.

Mote · 06-17-2009, 10:33 AM

Ouch! Hope you work out your car problems! Shiv can definitely troubleshoot your problems so give him a call ASAP!

Mr. 5 · 06-17-2009, 10:59 AM

I think this guy only reads what he writes.

jpsimon · 06-17-2009, 11:06 AM

Shall we take bets on what his next post will be?

"So I drove my car really hard again today.... for some reason it still doesn't work!!! what should i do?"

ar design · 06-17-2009, 11:19 AM

Quote:

Originally Posted by jpsimon

Shall we take bets on what his next post will be?

"So I drove my car really hard again today.... for some reason it still doesn't work!!! what should i do?"

Ferre86 · 06-17-2009, 11:56 AM

as soon as i can, heres huge time diffrience, had no chance to call yesterday , i ll give a try today.

dannygenio · 06-17-2009, 12:04 PM

I hope you don;t blow your engine

OpenFlash · 06-17-2009, 12:30 PM

Quote:

Originally Posted by dannygenio

I hope you don;t blow your engine

The engine isn't blown. I just talked to him. Along with the PROcede, the OP had dps, exhaust, bypass valves and an FMIC installed. All at the same time which is a recipe for potential problem. There is something wrong with the installation of one or more items. He will have to bring it back to the shop that did the work for them to go over everything.

Shiv

Ferre86 · 06-17-2009, 12:34 PM

Quote:

Originally Posted by shiv@vishnu

The engine isn't blown. I just talked to him. Along with the PROcede, the OP had dps, exhaust, bypass valves and an FMIC installed. All at the same time which is a recipe for potential problem. There is something wrong with the installation of one or more items. He will have to bring it back to the shop that did the work for them to go over everything.

Shiv

Thanks for informations Shiv,

Ferre86 · 06-17-2009, 02:45 PM

i found the first problem , we installed the DV on wrong way, they are not facing each other right now, gonna change it and check it again ,

JoeyFiasco · 06-17-2009, 03:12 PM

i guess human error is only multiplied when you install so many parts all at once. hard to tell what caused it too. good luck meng

scottp999 · 06-17-2009, 04:29 PM

Glad you are getting to the point of debugging the problem. Please post the solution(s) when you find them.

06-16-2009, 05:24 PM	#1
Ferre86 Captain 38 Rep 944 Posts Drives: E93 M3/H2/SL350/Panamera 4/ Join Date: Mar 2009 Location: Turkey iTrader: (0)	the car is done but dont feel any diffrience even feel like lost power! all my mods are shows in my signutare, installation just completed but it feels like something holding the car not go fast and also gears are taking so long especially on higher rpm's also after changing the gear car banks up so bad. and on my gauges ( RiXeffects ) it shows car boots around mostly 14.0 to 14.8 psi is it normal ? also the car overheating so fast and going on high temperature , it wasnt that bad before. but i m absolutry sure on that i havent feel any diffrience that i again even lost alot... __________________ http://www.youtube.com/user/Ferre86 \| e93 M-DCT ESS VT2-625 \| Akra Slip-on \| Challenge Race Catless x-pipe \| Challenge front lip \| Challenge Diffuser \| Carbon front grilles \| defi gauges control unit \| Macht Schnell gauge panel \| E93 M3 trunk Spoiler \| IND Carbon Fiber Side Markers \|
	Appreciate 0 Tweet Quote

06-16-2009, 05:45 PM	#5
Mr. 5 Modder Raider 800 Rep 8,633 Posts Drives: M3 Join Date: Apr 2007 Location: Surf City, HB iTrader: (31) Garage List 2007 e90 335i [8.00]	I'm really confused with what exactly you did. You say the car is done and the mods are in your sig, but what did you recently do??? __________________ e36 M3 Coupe, e36 325i Sedan e90 335i--SOLD Best 60-130-------------9.15 Seconds------------------WWW.MR5RACING.COM
	Appreciate 0 Quote

06-16-2009, 06:12 PM	#6
anklegrabber Private First Class 14 Rep 103 Posts Drives: Alpine White 335 Join Date: Feb 2009 Location: SoCal iTrader: (7)	He just finished installing his PROcede V3 RevII. http://www.e90post.com/forums/showthread.php?t=272402 He's been having some problems along the way. Hope you get them resolved. __________________ Check out my car!! http://www.e90post.com/forums/showthread.php?t=261500
	Appreciate 0 Quote

06-16-2009, 06:23 PM	#7
lpphreakx06 Professional Moose Racer 325 Rep 7,509 Posts Drives: SG 335i E92 RIP + 2015 SS M3 Join Date: Jul 2008 Location: Bellevue, Wa iTrader: (25)	Put it in DS! __________________ Visit my blog anytime: http://www.sfpayments.com BMW Dream Team PNW Chapter, member #1 \|HP Autowerks \| AR DESIGN \| BMW PERFORMANCE \| STOP TECH \| Volk Racing\| AMS \| ARKYM
	Appreciate 0 Quote

06-17-2009, 07:39 AM	#8
Ferre86 Captain 38 Rep 944 Posts Drives: E93 M3/H2/SL350/Panamera 4/ Join Date: Mar 2009 Location: Turkey iTrader: (0)	alright today i had few more runs, the tempeture seems fine now but as i said before on the high rpm's ( 5-7 ) the car is shaking and takes too long to reach 7,000rpm and around 200-240km's on high speed engine light comes on, after slowing down it goes away or if i stop the car and start it again everything becomes normal. everything seems fine but theres another thing i wanna let you guys know, on my first try to install on vishnu i had few lights on, ( engine , transmission , etc.. ) after install it corretly all lights gone but we deleted lot of codes that the car gives it. yes theres no more codes or lights but the car could be on protection mode or something ? __________________ http://www.youtube.com/user/Ferre86 \| e93 M-DCT ESS VT2-625 \| Akra Slip-on \| Challenge Race Catless x-pipe \| Challenge front lip \| Challenge Diffuser \| Carbon front grilles \| defi gauges control unit \| Macht Schnell gauge panel \| E93 M3 trunk Spoiler \| IND Carbon Fiber Side Markers \|
	Appreciate 0 Quote

06-17-2009, 07:59 AM	#9
enrita Major General 161 Rep 7,377 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	YOU HAVE TO CALL Vishnu for support! They are the only one that can help you troubleshoot the problem. __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0 Quote

06-17-2009, 10:33 AM	#12
Mote Colonel 143 Rep 2,162 Posts Drives: 2008 E92 - 1991 E30 Join Date: Jan 2008 Location: Beverly Hills, CA iTrader: (0)	Ouch! Hope you work out your car problems! Shiv can definitely troubleshoot your problems so give him a call ASAP!
	Appreciate 0 Quote

06-17-2009, 10:59 AM	#13
Mr. 5 Modder Raider 800 Rep 8,633 Posts Drives: M3 Join Date: Apr 2007 Location: Surf City, HB iTrader: (31) Garage List 2007 e90 335i [8.00]	I think this guy only reads what he writes. __________________ e36 M3 Coupe, e36 325i Sedan e90 335i--SOLD Best 60-130-------------9.15 Seconds------------------WWW.MR5RACING.COM
	Appreciate 0 Quote

06-17-2009, 11:06 AM	#14
jpsimon Team Zissou 3154 Rep 10,200 Posts Drives: 2022 AWD M3 Comp - SMB Join Date: Dec 2006 Location: CT iTrader: (7)	Shall we take bets on what his next post will be? "So I drove my car really hard again today.... for some reason it still doesn't work!!! what should i do?"
	Appreciate 0 Quote

06-17-2009, 11:56 AM	#16
Ferre86 Captain 38 Rep 944 Posts Drives: E93 M3/H2/SL350/Panamera 4/ Join Date: Mar 2009 Location: Turkey iTrader: (0)	as soon as i can, heres huge time diffrience, had no chance to call yesterday , i ll give a try today. __________________ http://www.youtube.com/user/Ferre86 \| e93 M-DCT ESS VT2-625 \| Akra Slip-on \| Challenge Race Catless x-pipe \| Challenge front lip \| Challenge Diffuser \| Carbon front grilles \| defi gauges control unit \| Macht Schnell gauge panel \| E93 M3 trunk Spoiler \| IND Carbon Fiber Side Markers \|
	Appreciate 0 Quote

06-17-2009, 12:04 PM	#17
dannygenio Banned 6 Rep 567 Posts Drives: 2008 E92 Flaming Red Join Date: Feb 2009 Location: Philly iTrader: (0)	I hope you don;t blow your engine
	Appreciate 0 Quote

06-17-2009, 02:45 PM	#20
Ferre86 Captain 38 Rep 944 Posts Drives: E93 M3/H2/SL350/Panamera 4/ Join Date: Mar 2009 Location: Turkey iTrader: (0)	i found the first problem , we installed the DV on wrong way, they are not facing each other right now, gonna change it and check it again , __________________ http://www.youtube.com/user/Ferre86 \| e93 M-DCT ESS VT2-625 \| Akra Slip-on \| Challenge Race Catless x-pipe \| Challenge front lip \| Challenge Diffuser \| Carbon front grilles \| defi gauges control unit \| Macht Schnell gauge panel \| E93 M3 trunk Spoiler \| IND Carbon Fiber Side Markers \|
	Appreciate 0 Quote

06-17-2009, 03:12 PM	#21
JoeyFiasco Major 26 Rep 1,211 Posts Drives: '09 Coupe Join Date: Aug 2008 Location: P'boro, UK iTrader: (0)	i guess human error is only multiplied when you install so many parts all at once. hard to tell what caused it too. good luck meng
	Appreciate 0 Quote

06-17-2009, 04:29 PM	#22
scottp999 Brigadier General 136 Rep 4,764 Posts Drives: 4runner SR5 Join Date: Mar 2007 Location: MD iTrader: (2) Garage List 2007 BMW 335 [9.00]	Glad you are getting to the point of debugging the problem. Please post the solution(s) when you find them.
	Appreciate 0 Quote