Boost-numbers with BT?

kaba · 06-30-2009, 02:36 PM

Hi, my 08 E93 335ia has Jb3 (map 4 now), code 3 IC. I did record the torque values (engine torque actual value) and got 498nm (367lb-ft). Are these the real torque values?

Howabout recording the boost of turbos, is it possible with BT?

Thanks,

Kaba

Crisp · 06-30-2009, 03:03 PM

There has to be some sort of guide for the BT scanner out there.

There are a lot of live values you can see but I am not sure what all of them are.
If there was a list that showed you some of the key things such as intake temperature, boost, rpm, mph, engine load, on a graph would be nice.
I know they are there, but mixed in with hundreds of other things and it gets confusing to see which one you are actually looking for if you want engine load or intake temp.

kaba · 06-30-2009, 03:34 PM

Quote:

Originally Posted by Crisp

There has to be some sort of guide for the BT scanner out there.

There are a lot of live values you can see but I am not sure what all of them are.
If there was a list that showed you some of the key things such as intake temperature, boost, rpm, mph, engine load, on a graph would be nice.
I know they are there, but mixed in with hundreds of other things and it gets confusing to see which one you are actually looking for if you want engine load or intake temp.

Yes, there are hundrets of variables. Intake temp etc are easy to find and record. Ive tried to find boost, but dont find it. Maybe its in "techical language" and thats why...i will tonight go through all the options again.

Bubbles · 06-30-2009, 07:54 PM

Search, Scalbert made a post and I confirmed with my flash.

kaba · 07-01-2009, 09:01 AM

Quote:

Originally Posted by Bubbles

Search, Scalbert made a post and I confirmed with my flash.

thanks, i didnt find that when i tried to search

GeorgeSmooth · 07-01-2009, 10:22 AM

You going to have to find a box that says pressure infront of throttle. When you log, it will bring up figures like this:
Pressure in front of throttle valve
101.00
102.00
104.00
101.00
99.00
100.00
103.00
99.00
102.00
106.00
108.00
115.00
131.00
156.00
174.00
162.00
168.00
164.00
169.00
169.00
166.00
197.00
139.00
111.00
101.00

These figures are in kPa (kilopascals where 100KPa=1bar=14.5psi). These figures include the ambient pressure which in my case was 85.0 which need to be subtracted to get extra boost. The ambient pressure can also be found on one of the tick boxes.

Enjoy.

In terms of the torque figure you finding in newton meters its relative accurate as a before and after tool although I have found the figure changes relative to the load and boost. When I installed a Helix cooler recently I noticed this figure jumped up by 30nm and I could feel it so it is accurate.

scalbert · 07-01-2009, 11:29 AM

Quote:

Originally Posted by kaba

thanks, i didnt find that when i tried to search

http://www.e90post.com/forums/showthread.php?t=233284

06-30-2009, 02:36 PM	#1
kaba Enlisted Member 1 Rep 33 Posts Drives: BMW 335i steptronic, conv. E93 Join Date: Feb 2009 Location: Helsinki, Finland iTrader: (0)	Boost-numbers with BT? Hi, my 08 E93 335ia has Jb3 (map 4 now), code 3 IC. I did record the torque values (engine torque actual value) and got 498nm (367lb-ft). Are these the real torque values? Howabout recording the boost of turbos, is it possible with BT? Thanks, Kaba
	Appreciate 0 Tweet Quote

06-30-2009, 03:03 PM	#2
Crisp Lieutenant Colonel 440 Rep 1,781 Posts Drives: F95 X5M Join Date: Jun 2008 Location: NYC iTrader: (1) Garage List 2016 BMW M5 [0.00] 2020 Aston Martin V ... [0.00] 2020 BMW 530i X-Drive [0.00] 2020 BMW X5M CP [0.00]	There has to be some sort of guide for the BT scanner out there. There are a lot of live values you can see but I am not sure what all of them are. If there was a list that showed you some of the key things such as intake temperature, boost, rpm, mph, engine load, on a graph would be nice. I know they are there, but mixed in with hundreds of other things and it gets confusing to see which one you are actually looking for if you want engine load or intake temp. __________________ Current F95 X5M; E60 M5 6spd; Mclaren 570s; Aston Martin Vantage; Ferrari FF
	Appreciate 0 Quote

06-30-2009, 07:54 PM	#4
Bubbles Brigadier General 2824 Rep 4,445 Posts Drives: Green Bastard Join Date: Jun 2007 Location: Bishop Bend iTrader: (3)	Search, Scalbert made a post and I confirmed with my flash. __________________
	Appreciate 0 Quote

07-01-2009, 10:22 AM	#6
GeorgeSmooth Lieutenant 40 Rep 565 Posts Drives: 2008 E90 335i AT Join Date: Feb 2008 Location: South Africa iTrader: (0)	You going to have to find a box that says pressure infront of throttle. When you log, it will bring up figures like this: Pressure in front of throttle valve 101.00 102.00 104.00 101.00 99.00 100.00 103.00 99.00 102.00 106.00 108.00 115.00 131.00 156.00 174.00 162.00 168.00 164.00 169.00 169.00 166.00 197.00 139.00 111.00 101.00 These figures are in kPa (kilopascals where 100KPa=1bar=14.5psi). These figures include the ambient pressure which in my case was 85.0 which need to be subtracted to get extra boost. The ambient pressure can also be found on one of the tick boxes. Enjoy. In terms of the torque figure you finding in newton meters its relative accurate as a before and after tool although I have found the figure changes relative to the load and boost. When I installed a Helix cooler recently I noticed this figure jumped up by 30nm and I could feel it so it is accurate. __________________ 08 E90 335i AT RB Turbos -NX Wet Kit - Chiplogic Flash or Procede V5- M3 Diff - AE Exhaust- Forge Dv's - Helix Intercooler - AR DP's - P3 Boost Gauge - Vishnu Meth- Stett Chargepipe and CAI 09 C63
	Appreciate 0 Quote