BT Code Advise

WOPALX · 07-01-2009, 07:04 AM

Hi,

I had a brake pad wear error the other day so replaced the rear pads and sensor. Error went away

Anyway every other day the wear error returns, I cna stop and start the car and 95% of the time the error goes away.

Today I played with the BT tool when it came back again.

I see 0% on the rear pad CBS data using the BT tool but it won't reset.

Short test on the car yields the following BT code;

Stability control
Current Fault Codes
5DE2
DSC-ECU: ECU-internal: DePwm status: Software/hardware configurations do not match (DF11i/s).
Error will not cause a warning light
Error is currently present
Test conditions have been completed

When I clear all faults with the BT software the CBS goes back to normal and the error light is gone. But then it returns again after a short period of driving.

Any help would be appreciated, sensor seams to be fitted correctly.

Cheers,

Stuart

enrita · 07-01-2009, 07:12 AM

just take it to the dealer if you have warranty.

David 12 · 07-01-2009, 02:35 PM

I just replaced the pads and sensor also and I still have the error message.

What progman are you currently running? If you are pre 29.2, I think it takes a progman update to fix this - Since I am pre 29.2 and don't want the update, I just ignore the warning symbol/error.

07-01-2009, 07:04 AM	#1
WOPALX Lieutenant Colonel 92 Rep 1,993 Posts Drives: 335i Sedan Join Date: May 2007 Location: Sydney, Australia iTrader: (2)	BT Code Advise Hi, I had a brake pad wear error the other day so replaced the rear pads and sensor. Error went away Anyway every other day the wear error returns, I cna stop and start the car and 95% of the time the error goes away. Today I played with the BT tool when it came back again. I see 0% on the rear pad CBS data using the BT tool but it won't reset. Short test on the car yields the following BT code; Stability control Current Fault Codes 5DE2 DSC-ECU: ECU-internal: DePwm status: Software/hardware configurations do not match (DF11i/s). Error will not cause a warning light Error is currently present Test conditions have been completed When I clear all faults with the BT software the CBS goes back to normal and the error light is gone. But then it returns again after a short period of driving. Any help would be appreciated, sensor seams to be fitted correctly. Cheers, Stuart
	Appreciate 0 Tweet Quote

07-01-2009, 07:12 AM	#2
enrita Major General 161 Rep 7,377 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	just take it to the dealer if you have warranty. __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0 Quote

07-01-2009, 02:35 PM	#3
David 12 Major 115 Rep 1,048 Posts Drives: 2019 BMW X5 50i BSM, M Sport Join Date: Jan 2007 Location: Omaha iTrader: (0)	I just replaced the pads and sensor also and I still have the error message. What progman are you currently running? If you are pre 29.2, I think it takes a progman update to fix this - Since I am pre 29.2 and don't want the update, I just ignore the warning symbol/error.
	Appreciate 0 Quote