|
|
|
|
 |
 |
 |
BMW Garage | BMW Meets | Register | Today's Posts | Search |
 |
|
BMW 3-Series (E90 E92) Forum
>
Junkie's Dyno Adventures
|
 |
| 07-24-2009, 07:08 PM | #1 |
|
First Lieutenant
 
33
Rep 314
Posts
Drives: 07 BMW 335i Sedan+2 Baby Seats
Join Date: Feb 2009
Location: SF South Bay Area, CA
|
Junkie's Dyno Adventures
Hi Folks,
I wanted to create another post with my end user experience. I finally got off my butt, read the documentation on how to do logging and spent a couple dollars at the dyno. Car = 2007 E90 AT (30K miles) Gas = Union 76 - 91 octane from California Mods = look at my signature (in case you don't read it, I do have race cats) Map = PROcede Rev II Canbus with Stage 3 Map 7/23 - I'm beta testing this map User Settings = All Default (which means Ignition Correction = 100%) This dyno chart has the performance numbers for my car:  This dyno chart has the ambient information during the runs:  This next picture is a screenshot of the datalog for one of the dyno runs:  This dyno chart is to give a point of reference. I've done enough dyno runs between different places to know that calibration is not universal. Here my car vs. a E90 M3 with DCT that was on the dyno 30 mins before mine (its about same ambient scenario), take it for what its worth.  Subjective Comments: . I'm thoroughly enjoying the car, its drives incredibly smoothly. As the dyno plots show its smoothness at WOT, that level of smoothness also exists at all partial throttle positions that occur in my day to day commute. If you're in the SF South Bay Area and are curious about my setup, don't hesitate to PM me. I'll do a separate post about my Wavetrac LSD and Rear Subframe bushing experience. Thanks for reading and welcome to the weekend. Junk
__________________
11.535@124.423mph (1.641 60') - AutoTune 7-27, Race+Meth, Best ET w/ only 80% throttle 1st and 2nd
11.647@121.356mph (1.590 60') - AutoTune (beta pre-5-15), Race Gas, No METH Perf Mods: Vishnu PROcede Rev3 v5, Vishnu PWM Meth Kit, AR Design DPs, AE Exhaust, Helix FMIC, Vishnu DCI, Forge DV, WaveTrac LSD (Best Trap - 124.665mph) |
| 07-24-2009, 07:18 PM | #2 |
|
******
56
Rep 886
Posts |
Wow! Impressive numbers!
__________________
Mods: RB turbos, JB4, BMS DCI, Scoops, Forge DVs, ar design catless DPs, Milltek exhaust system, Helix FMIC, Quaife LSD, VK MotorWerks OC Kit, Bilstein B16 PSS10
 |
|
Appreciate
0
|
| 07-24-2009, 07:45 PM | #4 |
|
1849
Rep 17,960
Posts
Drives: A Lot
Join Date: Sep 2006
Location: SF Bay, CA
iTrader: (0)
Garage List 2018 Ducati Panigal ... [0.00]
2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00] |
Looks good. And that's exactly what it should be. Less than 14psi of boosts at peak hp rpm
 Get some catless dps in there and see what it does! Cheers, Shiv |
|
Appreciate
0
|
| 07-24-2009, 08:19 PM | #6 |
|
First Lieutenant
33
Rep 314
Posts
Drives: 07 BMW 335i Sedan+2 Baby Seats
Join Date: Feb 2009
Location: SF South Bay Area, CA
|
Hi Shiv,
Thanks ... just to make a correction, I do have catless downpipes, but I have race cats in my exhaust. Not sure if there is a much of a difference where you put the "pinch in the straw", but I'm considering removing those cats too (for offroad use - of course). Junk
__________________
11.535@124.423mph (1.641 60') - AutoTune 7-27, Race+Meth, Best ET w/ only 80% throttle 1st and 2nd
11.647@121.356mph (1.590 60') - AutoTune (beta pre-5-15), Race Gas, No METH Perf Mods: Vishnu PROcede Rev3 v5, Vishnu PWM Meth Kit, AR Design DPs, AE Exhaust, Helix FMIC, Vishnu DCI, Forge DV, WaveTrac LSD (Best Trap - 124.665mph) |
|
Appreciate
0
|
 |
| Bookmarks |
|
|
